Valves with pre-setting are used in water-borne two-line systems to ensure optimal distribution of the water in the heating system. Pre-set.

Required module for those who want to have a wireless systemFeatures Radio module• Required module• Sends and receives wireless signals between room thermostats and Master Controller

CS pressure switches have a three-pole switch and adjustable differential. The pressure switches are fitted with a manual switch that will lock the contact system in the open position independently of the pressure in the system.

DEVIreg TM 316 is a simple, electronic thermostat with enhanced installation functionalityin cabinets with DIN rail fittings. The thermostat is primarily used for frost protection on roofs, igutters and downpipes. In addition, it can be used to control room and floor temperature,ventilation, cooling or snowmelt on the ground, pipe fencing and similar installations.The primary characteristics of the thermostat are the temperature setting range - with setting ofboth an upper and lower temperature, between which the thermostat allows the system to heat.This mode is primarily used to control frost protection systems on roofs, gutters anddownpipe (an external outdoor air sensor must be used).The thermostat is equipped with two additional buttons for adjusting the hysteresis andthe temperature value for use during economy periods (an external timer is required).The thermostat has a relay with two contact pairs - NO (normally open) and NC (normally closed), and it is intended to use the thermostat for heat andcooling systems. In addition, the NO and NC contact pairs are not powered by a voltage source within the thermostat and can be used forcontrol systems with any voltage up to 250 V. It is designed so that the sensor circuit is galvanically separated from the high voltage part.

Danfoss AB-QM tailpieces. Union connection, 1 pcs.

Pressure transmitter MBS 33 is designed for use in almost all industrial applications, and offers a reliable pressure measurement, even under harsh environmental conditions. The flexible pressure transmitter programme covers a 4-20 mA output signal, absol

Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system

DEVIreg TM 330 is a series of simple electronic thermostats for installation in cabinets withDIN rail bracket. To measure and control the desired temperature, either one must be usedwiring sensor (in the kit) or an external or space sensor. The thermostat must be installedafter a multi-pole switch. It has an LED indicator that shows standby periods (green light) andheating periods (red light).DEVIreg TM 330 has a relay with two contact pairs - NO (normally open) and NC (normally closed) andis intended to be used for heating and cooling systems. In addition, the NO and NC contact pairsnot supplied by a voltage source inside the thermostats and can be used forcontrol systems with any voltage up to 250 V.The series is designed with thermostats in three temperature ranges.DEVIreg TM 330 (5-45 ° C) is primarily used for controlling a lower temperature range, such as frost protection, as well as for cooling, comfort floor heating, total (direct)underfloor heating, ice and snowmelt on the ground, frost protection on roofs, pipe protection etc. The thermostat has a button for adjusting the temperature setting with ascale from 5 ° C to 45 ° C. This type has temperature drop in economy period mode using an external timer.

Thermostatic disinfection module for MTCV version B

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

Danfoss SSM underfloor heating manifold in stainless steel with output for 5 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Demanding applications, with IP67, for valve range B, 10W ac / 18W dc, IP67

Danfoss A/S, 003H6905

Danfoss AB-QM is a Pressure Independent Control Valve (PICV) that combines high accuracy with market-leading ease of use. AB-QM's design is fully geared to ensure that your projects meet your schedule and budget, while providing the most efficient HVAC system. Pressure-independent valves are control valves that have an automatic balancing function. A built-in pressure regulator maintains a constant differential pressure across the control valve, ensuring full authority and automatic flow limitation. By combining two functions in one, regulation and automatic water balance, PICVs from Danfoss offer a cost-effective solution to the challenges that far-sighted designers of HVAC systems face.

Valve housing type RLV Press incl. self-sealing nipples. DN15.

For those who want to set the desired temperature, see the current temperature and control the floor surface temperatureFeatures wireless display thermostats• Infrared floor temperature sensor• Temperature range limitation• Wireless 2-way communication• Touchscreen control• Icon-based navigation• Noiseless switching• Battery (2 x 1,5V) powered

SPOLE AM024D 24V DC 9.5W 9mm Product Description: Coil for solenoid valve AM024D Voltage: 24V Consumption: 7.5W AC / 9.5W DC Temperature: Up to +50°C IP00 with DIN terminals form A

Demanding applications, with IP67, for valve range B, 10W ac / 18W dc, IP67

DEVIcrimpTMkrympeflexsætself-limitingcablesConnectionfor cable / can forself-limitingheating cables

Danfoss 065Z0158 rörmokeritillbehör

Danfoss RAVL thermostat. A range of built-in and remote sensors that fit to older Danfoss RA/V and RA/VL valve bodies, providing a simple way to upgrade older radiator thermostats. The products shown on this site represents a part of Danfoss' extensive

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

The Danfoss Dynamic Valve is an innovative two-in-one radiator valve. It combines a thermostatic radiator valve for accurate temperature control with an automatic adjustment valve – all in the same valve.

ASV-PV is a automatic balancing valve that maintains constant differential pressure across the riser. ASV-PV can be set to control the differential pressure in several Dp setting ranges: Between 5 to 25 kPa (10 kPa factory setting), 20 to 40 kPa (30 kPa), 35 to 75 kPa (60 kPa), and 60 to 100 kPa (80 kPa). When supplied ASV-PV is set at factory setting. It incorporates a shut-off function and a drain cock. ASV-PV is designed for installation in the return pipe.

Union for the seat valves VRB and VRG.