Alu pex-system - sita 7

Henco 16 mm x 12 PVDF press straight male adapter for water-, heating- and cooling installations. Max. 16 bar.

Geberit Mepla T-piece with female thread: d=26mm, Rp=3/4, d1=26mm

Uponor 1070548 rörmokeritillbehör Kompressionskoppling

Uponor 1006641 rörmokeritillbehör Komprimeringsplugg

Geberit Mepla bend adapter 90° with male thread: d=16mm, R=1/2

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Uponor 1070552 rörmokeritillbehör Kompressionsreducerare

HENCO 40X40X40 mm VISION push Tee for water, heating- and cooling installations, max. 16 bar

HENCO 20X20 mm VISION push elbow 90 deg. for water, heating- and cooling installations, max. 16 bar

HENCO 26X1/2 VISION push bent 90 deg. male adapter for water, heating- and cooling installations, max. 16 bar

Henco 20 x 16 x 16 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Henco 63 x 50 x 63 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Henco 20 mm x 12 PVDF press straight female adapter for water-, heating- and cooling installations. Max. 16 bar.

Henco 63 x 40 mm PVDF press reduced coupling for water-, heating- and cooling installations. Max. 16 bar.

Henco 50 x 40 mm PVDF press reduced coupling for water-, heating- and cooling installations. Max. 16 bar.

Henco 32 mm x 1 PVDF press elbow 90° for water-, heating- and cooling installations. Max. 16 bar.

Henco 20 x 16 mm PVDF press reduced coupling for water-, heating- and cooling installations. Max. 16 bar.

Henco 32 x 1 x 32 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Henco 20 x 26 x 20 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

HENCO 40X11/4 PVDF Press elbow 90 deg. for water, heating- and cooling installations, max. 16 bar

HENCO 26X3/4 PVDF Press elbow 90 deg. for water, heating- and cooling installations, max. 16 bar

Geberit Mepla adapter to Geberit Mapress, with plain end: CC499K, d=32mm, d1=28mm

Geberit Mepla reducer: d=26mm, d1=16mm

Press coupling for DHW and radiator systems. PPSU plastic with stainless steel/aluminum press cap, guaranteed leaking if not pressed. Calibration-free. Only to be used with Uponor MLC tubes and with Uponor approved pressing tools.

Pre-coupling PPSU Uponor 32 mm