Alu pex-system - sita 6

Geberit Mepla adapter with male thread: d=32mm, R=1

Geberit Mepla reducer: d=20mm, d1=16mm

Henco 50 x 50 mm PVDF press elbow 45° for water-, heating- and cooling installations. Max. 16 bar.

Geberit Mepla T-piece with female thread: d=26mm, Rp=1/2, d1=26mm

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, Rp-threadd: 20, Rp: 34

Geberit Mepla T-piece, reduced: d=20mm, d1=16mm, d2=20mm

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 32, d2: 32, d3: 32

Raxofix Connection screw fitting with SC-Contur- silicium bronze- press connection, G-thread- flat sealingComponentsEPDM sealing elementd: 16, G: 34

PPSU coupling Uponor 50X50 mm

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Used with Roth alu-laserplus pipe and Roth tools

Bending spring HENCO, internal 20X2 mm, L = 500 mm

HENCO 26X3/4 VISION push bent 90 deg. male adapter for water, heating- and cooling installations, max. 16 bar

Henco 63 mm x 2 PVDF press straight male adapter for water-, heating- and cooling installations. Max. 16 bar.

HENCO 26X3/4 VISION push straight female adapter for water, heating- and cooling installations, max. 16 bar

Henco 50 x 50 mm PVDF press straight coupling for water-, heating- and cooling installations. Max. 16 bar.

Henco 63 x 2 x 63 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Henco 32 x 26 x 32 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Henco 26 x 16 x 26 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Henco 16 x 16 x 16 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

HENCO 20X1/2X20 mm VISION push Tee for water, heating- and cooling installations, max. 16 bar

Henco 26 x 20 x 26 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Henco 16 mm x 12 CuSi press straight male adapter for water-, heating- and cooling installations.

Geberit Mepla adapter with male thread: d=40mm, R=1