Alu pex-system - sita 25

Used with Roth alu-laserplus pipe and Roth tools

Used with Roth alu-laserplus pipe and Roth tools

Geberit Mepla adapter with female thread: d=40mm, Rp=1

Geberit Mepla reducer: d=32mm, d1=26mm

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 40, d2: 32, d3: 40

Bending spring HENCO, external 20X2 mm, L = 500 mm

Henco 16 x 20 x 16 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Geberit Mepla bend adapter 90° with female thread: d=26mm, Rp=3/4

Uponor 1070554 rörmokeritillbehör Kompressionsreducerare

Uponor 1070560 rörmokeritillbehör Kompressionstee

Compression angle Uponor nipple/nipple 1/2.

Uponor 1029139 rörmokeritillbehör Kranadapter

PPSU coupling Uponor 50X40 mm

45° Presbend PPSU Uponor 40X40 mm.

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Henco 50 x 112 x 50 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Henco 20 x 20 x 20 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Geberit Mepla T-piece, reduced: d=63mm, d1=32mm, d2=63mm

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 25, R: 34

Pre-coupling PPSU Uponor 25 x 16 mm

Used with Roth alu-laserplus pipe and Roth tools

Henco 50 mm x 112 PVDF press straight female adapter for water-, heating- and cooling installations. Max. 16 bar.

Uponor 1070581 rörmokeritillbehör Kompressionsreducerare