Alu pex-system - sita 12

Uponor 1029128 rörmokeritillbehör Kranadapter

Uponor 1029127 rörmokeritillbehör Kranadapter

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 25, d2: 16, d3: 20

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 20, d2: 20, d3: 20

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 20, d2: 20, d3: 16

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 25, R: 34

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 20, R: 12

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Used with Roth alu-laserplus pipe and Roth tools

Used with Roth alu-laserplus pipe and Roth tools

Uponor 1013794 rörmokeritillbehör Push-in böj

Uponor 1070505 rörmokeritillbehör Kranadapter

Uponor 1070504 rörmokeritillbehör Kranadapter

Uponor 1032896 rörmokeritillbehör Kranadapter

Uponor 1032895 rörmokeritillbehör Kranadapter

Uponor 1046930 rörmokeritillbehör Ändmatare, förminskning

Uponor 1070553 rörmokeritillbehör Kompressionsreducerare

Uponor 1046914 rörmokeritillbehör Armbåge

Uponor 1070543 rörmokeritillbehör Armbåge

Uponor 1046921 rörmokeritillbehör T-rörstopp

Geberit Mepla adapter with male thread: d=32mm, R=1

Geberit mepla reducer: d=40mm, d1=32mm

Geberit Mepla reducer: d=20mm, d1=16mm

Geberit Mepla coupling: d=40mm

Geberit Mepla T-piece with female thread: d=50mm, Rp=1 1/2, d1=50mm