Alu pex-system - sita 11

Raxofix T-piece with SC-Contur- silicium bronze- press connectors, Rp-threadd1: 32, Rp: 34, d2: 32

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 25, R: 34

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 20, R: 12

Raxofix Coupling with SC-Contur- silicium bronze- press connectiond1: 40, d2: 32

Raxofix Coupling with SC-Contur- Silicium bronze - press connection d1: 25, d2: 25

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Prestee PPSU Uponor 40X40X40 mm

45° Presbend PPSU Uponor 50 x 50 mm.

Geberit Mepla coupling: d=40mm

Raxofix Adapter with SC-Contur- silicium bronze- press connection, R-threadd: 40, R: 114

Geberit Mepla T-piece with female thread: d=32mm, Rp=3/4, d1=32mm

Raxofix Adapter with SC-Contur- silicium bronze- press connection, R-threadd: 16, R: 12

PPSU coupling Uponor 32X25 mm

Raxofix Coupling with SC-Contur- Silicium bronze - press connection d1: 16, d2: 16

Used with Roth alu-laserplus pipe and Roth tools

Used with Roth alu-laserplus pipe and Roth tools

Used with Roth alu-laserplus pipe and Roth tools

Used with Roth alu-laserplus pipe and Roth tools

Prestee PPSU Uponor 20X16X16 mm

Press coupling for DHW and radiator systems. PPSU plastic with stainless steel/aluminum press cap, guaranteed leaking if not pressed. Calibration-free. Only to be used with Uponor MLC tubes and with Uponor approved pressing tools.

Uponor 1070507 rörmokeritillbehör Kranadapter

Uponor 1070508 rörmokeritillbehör Kranadapter

Uponor 1070503 rörmokeritillbehör Kranadapter

Prestee PPSU Uponor 50X32X50 mm

45° Presbend PPSU Uponor 40X40 mm.