ABB - sita 5

The ESB63..N installation contactors are used to control single and three-phase loads up to 40 A and can be operated by AC or DC voltages. These contactors are made for use in household applications as well as in industrial environments.The following benefits are provided: Hum-free operation, low power consumption and integrated overvoltage protection. Various contact combinations and accessories are available.

AF16Z contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF..Z contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...250 V 50/60 Hz or 12...250 V DC. AF..Z contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF..Z contactors allow direct control by PLC-output 24 V DC 500 mA and obtain a reduced holding coil consumption. AF..Z contactors withstand short voltage dips and voltage sags (SEMI F47-0706 compliance) between 24...250 V 50/60 Hz AF..Z contactors have built-in surge protection and do not require additional surge suppressors The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks. (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

Front operated switch-disconnector. Types OT 16...125 include protected terminal clamps, IP 20.

Mounting plate for TS350 655 x 300mm

Handle and shaft must be ordered separatly.

Consumer Unit 36 modules with transparent door, IP65. Colour RAL 7035 Grå

4-pole, front operated, base mounted, DIN-rail mountable switch-diconnector with protected clamp terminals, handle and shaft are not included, suitable for distribution board with 45mm slots

Residual current circuit breaker with overcurrent protection (RCBO) 3P+N. Tripping: A type 16A Rated Residual Current: 300 mA Terminals: 25mm2 Operating temperature: -25C to +55'C Width: 4 modules 71mmTrigger IndicatorIn the event of a ground fault trigger,a blue flag appears on the shift.This feature helpstroubleshooting and reducing downtime.

PK67 Cable Distribution Cabinet 2CEA000042R0140 from ABB A/S

ABB KNX IP router connects the KNX bus with the Ethernet network. The device uses the KNXnet/IP protocol for communication (Routing and Tunneling).It can be used as a fast line and area coupler. The full filter table for main groups 0-31 is supported.KNX devices can be programmed via the LAN using ETS. For this and further clients 5 Tunneling Server are available.DIN 90X36X64 mm (H x W x D)The IP address can be fixed or can be received from a DHCP server. Power supply via 12..30 V DC or PoE.The KNX Standard Communication (Multicast) can be switched off. In this case, up to 10 IPR/S3.1.1 can communicate using unicast communication.

Cabinet PK48 Empty With Triangular Lock

PK67 Mounting plate steel 2CEA000042R0154 from ABB A/S

2CMA105921R1000

Front operated switch-disconnector. Types OT 16...125 include protected terminal clamps, IP 20.

Modular Selector Switch - 2-Pos Momentary, spring return from C to B - Key - Black/Key - Non-illuminated - Black plastic - No contact block - Key release code 72/Ronis 421

Safety switch 16A 3Poles Black handle IP65 exclusively for LM.

MS116-2.5 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 2.5 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

Front operated switch-disconnector. Types OT 16...125 include protected terminal clamps, IP 20.

Manual change-over switch, I-O-II -operation. Include terminal clamps, IP20.

Safety switch, grey enclosure, IP 65. Includes N- and PE-terminals, 2 membrane cable glands, 2 pull stoppers, handle and auxiliary contacts. Rectangular black selector-type handle.

Plug, earthing sleeve position 6h, rated current 63A, IP44 splashproof, 3-poles+neutral+earth, frequency 50-60 Hz, color code Red

STRAIGHT FITTING FOR CONDUIT PAFS - FIXED EXTERNAL THREAD FOR INSERTION INTO THREADED ENTRIES AND KNOCKOUTS. MATERIAL: PA (NYLON) 66

ABB DK42G3128 elskåp Aluminium

Safety switch, 3-p. 400V AC23 25A, 11kW. Aluminium enclosure. IP65. Grey Side-operated handle. Interlocked cover.

Handle knob. Mounting directly to the switch, no shaft needed. Padlockable in off-position. Black, 40 mm. Fits OT16...125F3/F4 og OT16...40F6/F8