The no auxiliary contacts break before the main contacts open - early break

Installation safety switch including N- and PE-terminals, cable glands. Cable entry position both top and bottom. Cable Outlets Per Side: 2xM25. Dark gray. IP65. Plastic enclosure. Side operated.

Manual change-over switch, I-O-II -operation. Include terminal clamps, IP20.

Surface socket-outlet, earthing sleeve position 6h, rated current 16A, IP44 splashproof, 3-poles+neutral+earth, frequency 50-60 Hz, color code Red

For shaft diameter 6 mm, door drilling 22.5 mm. Indication I-O and ON-OFF. IP54 handles, NEMA 1

The ESB25..N installation contactors are used to control single and three-phase loads up to 25 A and can be operated by AC or DC voltages. These contactors are made for use in household applications as well as in industrial environments.The following benefits are provided: Hum-free operation, low power consumption and integrated overvoltage protection. Various contact combinations and accessories are available.

Terra AC W11-G5-R-V2-0 – Terra AC charging station type 2, 5 m cable, 3-phase/16 A, with RFID, Version 2. Reliable charging station with secure RFID access. Flexible installation with 5 meter fixed cable.

Please note that the charging box must be installed and removed by an authorized installer, otherwise the warranty will be void.

Residual current circuit breaker with overcurrent protection (RCBO) 3P+N. Tripping: A type 16A Rated Residual Current: 30 mA Terminals: 25mm2 Operating temperature: -25C to +55'C Width: 4 modules 71mmTrigger IndicatorIn the event of a ground fault trigger,a blue flag appears on the shift.This feature helpstroubleshooting and reducing downtime.

Residual current circuit breaker with overcurrent protection (RCBO) 3P+N. Tripping: A type 10A Rated Residual Current: 30 mA Terminals: 25mm2 Operating temperature: -25C to +55'C Width: 4 modules 71mmTrigger IndicatorIn the event of a ground fault trigger,a blue flag appears on the shift.This feature helpstroubleshooting and reducing downtime.

Industrial Plugs, 3P+E, 16A, 380 ... 415 V Clock Position Of Grounding Contact 6 hour Color code Red

AF09 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

ABB ESB16-20N-01 Kontaktor

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

ABB 2CMA102003R1000 eluttag Blå

PMR474 Interconnector c/c 71 mm Low mounting boxes may be joined side by side by using a PMR474 interconnector, which must be cut to the height of the bottom of the box. Made of halogen free material (IEC/61249-2-21).

402EA Socket outlet, Jussi, Schuko, 2-gang, shuttered, screwless terminals There are terminals for each contact of the socket outlet for max 4 rigid wires. No X-terminals.

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

2CMA102012R1000

20EAKS Socket outlet, Jussi, Schuko, 1-gang, shuttered, screwless terminals There are terminals for each contact of the socket outlet. The terminals are for max 2 rigid wires.

Industrial Plugs, 2P+E, 16A, 200 ... 250 V Clock Position Of Grounding Contact 6 hour Color code Blue

Handle knob. Mounting directly to the switch, no shaft needed. Padlockable in off-position. Black, 40 mm. Fits OT16...125F3/F4 og OT16...40F6/F8

ABB TS-Line TS350S. Painted RAL 7015. The TS-Line is a series of technical cabinets made of pre-galvanized sheet metal.

Mounting dimensions: H675 x W300 x D200, with the depth behind the lock being 50mm less. 

The cabinets are used for pump control, street light control, fiber broadband, automation systems and electronic measurement applications. The cabinet is delivered as a unit ready for burial installation and can be purchased with mounting plates, moisture barriers, ventilation kits and meter windows if desired

ABB 2CGX063050106 elektriska switchtillbehör Frånskiljare

Manual change-over switch, I-O-II -operation. Include terminal clamps, IP20.

Miniature Circuit Breaker 1 pol. + nul C10, width 18MM