ABB - sita 4

Wall mounted socket, earthing sleeve position 6h, rated current 16A, IP44 splashproof, 3-poles+earth, frequency 50-60 Hz, color code Red

Latching relays are electromagnetically operated devices. The E290 range from ABB can be used to realise a simple, energy saving and efficient lighting control system. These devices are mainly used in private houses, factory premises and commercial and public buildings as well as in industrial plants. As a rule, latching relays controlled by means of impulse buttons are installed where it is necessary for lighting to be operated from at least three different places. Each time a command is initiated (by means of an impulse button), an electrical pulse is applied to the coil of the latching relay. The coil in the device is briefly energised and activated. That short pulse to the coil leads to the mechanical latch of the internal main contacts. The internal switching mechanism enables us to achieve a safe and reliable interlock (in the same way as a ballpoint pen). Each pulse that is sent to the magnetic coil system switches the device to its previous position where it is held mechanically until the next control pulse is received. The devices are designed for rated currents 16 and 32A. Through the combinable accessories the main modules can be used in nearly all market applications.

For controlling DALI devices via ABB i-bus®. One DALI output. Max. 64 DALI slaves (incl. emergency devices acc. EN 62386-202). Status feedback and control happens via KNX per DALI slave, group or broadcast. Szene-, slave-, staircase-, force and block-fct.

Contactor 30KW, 400V AC, 65A AC3, 3 poles, controlvoltage 100...250V AC/DC

PE terminal with screw connection, must be installed on the terminal carrier in MISTRAL panelboard, 7x16mm2 + 9x25mm2

Selector type handle. Indication I-O and ON-OFF, for shaft diameter 6 mm, door drilling 22.5 mm. IP 65 handles, padlockable with max. 3 padlocks with bail diameter 5...8 mm, door interlock in ONposition, defeatable, NEMA 1, 3R, 12, red-yellow, OT16...125F

Selector type handle. Indication I-O and ON-OFF, for shaft diameter 6 mm, door drilling 22.5 mm. IP 65 handles, padlockable with max. 3 padlocks with bail diameter 5...8 mm, door interlock in ONposition, defeatable, NEMA 1, 3R, 12, black, OT16...125F

Safety switch, 4-p. 400V AC23 16A, 7.5kW. Aluminium enclosure. IP65. Grey Side-operated handle. Interlocked cover.

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

Roof CP6 2CEA000042L0567 from ABB A/S

MS116-6.3 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 6.3 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

ABB DS203NC strömbrytare Residual-current device with overcurrent protection (RCBO) Typ A 3+N 1 modul/-er

Handle and shaft must be ordered separatly.

Front operated switch-disconnector. Types OT 16...125 include protected terminal clamps, IP 20.

PK Fuseholder left 2xE33 2CEA000042R0407 from ABB A/S

ABB 2CSR255180R1104 strömbrytare Residual-current device with overcurrent protection (RCBO) Typ A 1

Front operated switch-disconnector. Types OT 16...125 include protected terminal clamps, IP 20.

PK Label 30x90 2CEA000042R0122 from ABB A/S

For front operated switches. Indication in types OHB_ and OHY_: I-O/ON-OFF, in types OHG_: I-O. IP 65, NEMA 1,3R, 12, padlockable with three padlocks in OFF-position, door interlock in ON-position (defeatable to allow authorized personnel access for inspection). The shaft has to be ordered separately. Screw fixing from back side of the handle. No screws on the front ensures double insulation.

Safety switch, IP 65, grey enclosure. Includes PE-terminal, black handle (I-O, ON-OFF indication, selector-type handle in OTP_ and pistol type handle in OT_ switches). Also N-terminal up to size OTP 90. Threaded knock-outs, compression glands have to be ordered separately.

EMC safety switch 3-p.400V AC23A 15kW AC22A A Plastic enclosure IP65 Yellow-red Selector handle

Door CP6 2CEA000042L0528 from ABB A/S

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

2538-84 Centre plate, Impressivo, blind, white Enclosed cover plate. It is suitable for the 85mm cover frames and with the 2519-xx adapter also for the 100mm cover frames. The manufacture material is a durable high quality plastic. The surface is glossy and easy to keep clean. Cleaning with a mild, standard household detergent. Be careful when cleaning with a powerful dissolvent.

Safety switch, 4-p. 400V AC23 16A, 7.5kW. Plastic enclosure. IP65. Red Side-operated handle. Interlocked cover.