Viega - sita 35

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon.

Ø 40mm. For 1 1/2" bottom valve. Plastic.

Sanpress Inox Plug-in piece- steel non-corroding- plug-in end, R-threadComponentsPolygon d: 28, R: 1

Viega 2215.1

Sanpress Reducer with SC-Contur- gunmetal or silicium bronze- plug-in end, press connectionComponentsEPDM sealing elementd1: 42, d2: 28

Viega 95301

Viega 1112

Viega 95090

Viega 2259.5XL

Screw fitting- gunmetal or silicon bronze- R-thread, Rp-thread- flat sealing, angled

Viega 2211

T-piece- gunmetal- Rp-thread

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon d: 22, R: 34

Viega 2212

Viega 1118

Raxofix Coupling with SC-Contur- silicium bronze- press connectiond1: 25, d2: 20

Sanpress Adapter with SC-Contur- gunmetal or silicium bronze- press connection, R-threadComponentsEPDM sealing element, polygon, VdS certificationd: 42, R: 112

Viega connection elbow 90° ø110/155 x 50 mm

SealInternal-Ø: 46, Ø: 56.5, H: 3

Drains and odour traps in acc. with DIN EN 274 for washbasins and bidets – design versions and accessories.High-quality building technology with simple assembly.Visign universal and slotted valves with open cover or click-close cover.Space-saving odour traps for concealed and pre-wall mounting.Design versions.Bottle or pipe odour traps made of brass or plastic.Accessories for special installation situations.

Viega 2415

Sanpress Reducer with SC-Contur- gunmetal or silicium bronze- plug-in end, press connectionComponentsEPDM sealing elementd1: 28, d2: 18

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

Raxofix Adapter with SC-Contur- silicium bronze- press connection, Rp-threadd: 16, Rp: 12

Screw fitting- gunmetal- Rp-thread- conical sealing