Viega - sita 34

Viega 1112

Raxofix Adapter with SC-Contur- silicium bronze- press connection, R-threadd: 20, R: 12

Raxofix Adapter with SC-Contur- silicium bronze- press connection, R-threadd: 16, R: 34

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Megapress Adapter with SC-Contur for drinking water installation - steel pipes in accordance with DIN EN 10220/10255 with galvanizing in accordance with DIN EN 10240- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing element, cutting ring, separator ringDN: 15, D: 12, d: 15

Viega 3241

Adapter - gunmetal - soldered connection, Rp-thread d: 15, Rp: 34

Viega 1126XL

Profipress Cap with SC-Contur- copper - press connection Components EPDM sealing elements

Extension- gunmetal- R-thread, Rp-thread

Cap- for adjusting pipe G-threadG: 1, version: white

Viega 2616

Viega 2416.1

Connection elbow 90° - for WC - plastic Components - lip seal, additional connectionDN1: 100, L: 230, DN2: 50, version: alpine white

Viega 1118

Viega 1112

Press connector systems with press connectors and pipes made of non-alloy steel 1.0308 (E235), in acc. with EN 10305-3, externally galvanised with a zinc layer thickness of 8–15 m (blue chromatised).Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingRed symbol (to prevent confusion with Sanpress Inox (stainless steel) articles) »Not for drinking water installations«Sealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber),not resistant against hydrocarbon solvent, chlorinated hydrocarbon solvents, turpentine, petrol, FKM, dull blackDimensionsD38

Viega Sanpress bend 90° 22 Red brass/blank, 108120

Viega 94270G

Viega 95270

Viega 95040

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Sanpress Inox Crossover with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing elementd: 15

Long nipple in gunmetal with R-thread. R: 1, L: 110 mm

Adapter union- gunmetal nozzle, brass threaded connection- soldered connection, Rp-thread- conical sealing.