Viega 1115

Viega 1114.1

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 16, R: 34

Long nipple in gunmetal with R-thread. R: 34, L: 150 mm

T-piece- gunmetal- Rp-thread

Coupling- gunmetal- Rp-threadRp: 1

Viega 2426.1

Cap - copper - soldered connection d: 12

Crossover- copper- soldered connectiond: 15(quality seal for d12-54)

Elbow 45°- copper- soldered connectiond: 28(quality seal for d12-54)

Elbow 45°- copper- soldered connection, plug-in endd: 15(quality seal for d12-54)

Viega 2311.1

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectorsComponentsEPDM sealing elements, VdS certificationd1: 42, d2: 35, d3: 42

Viega 2211

Viega 2211

Viega 2218

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Connection screw fitting- gunmetal- R-thread, G-thread- flat sealingComponentsPolygon, flat seal AFM 34

T-piece - copper - solder connection.

Nipple pipe- gunmetal- G-thread.

Viega pipe marker pen model 2490.1.

Viega 95002A

Viega 2317.2

Viega 2326