· White· 230 V connection· Detection angle 180°· Detection range up to 14 meters (white)· Time delay up to 30 mins.· Setting of lux, time and meters below cover· Facility to block detection range

This surface-mounting box with two single flexible inputs is suitable for flush-mounting one function. The entire unit is splashproof which makes it extremely well-suited for use in damp areas and in demanding environments.Colour: black

Flush mounting box for 41-400, 41-700, 41-702, 41-770, 41-772, 41-800 and 41-802

With this module, you can control three motor-controlled applications, such as roller blinds, curtains or awnings, for example. By pushing the button, you can also control each motor manually. The run time of the motors can be set with the programming software. Using this module, you can interconnect two zero conductors, this keeps the wiring in the electricity cabinet tidy. The module is equipped with six feedback LEDs and one status LED and uses very little energy.

· For surface mounting on ceiling · Connect up to 10 Slavedetectors · Large detection range - 450 m2 · Setting of functions directly on the detector · Change settings via IR remote control · Potential free relay – high class · Protection class IP54 · Preprogrammed – ready for use

Digital black is a completely customisable control screen for Niko Home Control with an extremely user-friendly interface featuring clear symbols. The screen is automatically activated when your hand comes near. That way, you can switch or dim your lights, set scenarios, set ventilation modes, adjust blinds and sun blinds to the wanted position, in one operation. In short, all possible Niko Home Control control types are available.

· 230 V AC · For mounting on the ceiling · Connect up to 10 slave-detectors · Large detections range up to 450 m2 · Small movements in a range of 9 m2 · Setting of functions directly on the detector · Change settings via IR remote control · 2 channel potential free relay - high class · IP 54 protection class

The connected controller is the central module of every Niko Home Control installation. It covers all basic functions on which a Niko Home Control installation is built: it provides the power supply to the bus, ensures the connection with Niko Home Control IP devices (touchscreens and external video units) and enables remote control with a smartphone or tablet. Per installation only one connected controller is necessary. This module contains firmware that can only be programmed with the Niko Home Control programming software 2.1.1 or higher.

Cover IP 54 for 41-262/272/274

· Used with presence detector 41-700, 41-701, 41-720 and 41-721 · Used with motion detector 41-770, 41-771, 41-774 og 41-775 · Bracket for wall mounting included

· 230 V connection· Detection angle 180°• Detection range up to 11 meters (antracit)• Time delay up to 30 mins.• Setting of lux, time and meters below cover• Facility to block detection range

Presence detector, surface mounted, 360°, slave• 230 V AC• For mounting on the ceiling• Connect up to 10 slave-detectors to Master type 41-701• Large detections range - up to 450 m2• Small movements in a range of 9 m2• Setting of sensitivity on the detector• IP 54 protection class – can be installed in premises where this is necessary – e.g. in changing rooms.

· White· 230 V connection · Detection range 180° · Detection range up to 14 meters (white) · Time delay up to 30 mins. · Setting of lux, time and meters below hidden cover · Facility for ceiling installation · Facility to block detection range

The Minilux day/night switch is specifically designed for controlling outdoor lighting. The lighting turns on automatically when daylight decreases below the preset lux level (adjustable in the range 2 – 200 lux) and turns off when the daylight switch detects daylight above the preset level.· Discreet design· Handles loads up to 3.000 W / 3.000 VA· Luxrange 2..200 lux internal (Can't be altered by third party)· Test button· Can be turned off during night time by using a timer

This push button allows you to perform four operations. It is attached to the wall-mounted printed circuit board via a click mechanism. Switch including button. Finishing colour: white.

· Setting Minilux sensor PIR 41-400/41-445· Bracket for wall mounting included

· 230 V AC· Flush mounted in the ceiling· Use together with Master type 41-65x· Extends the detection area to all Masters type 41-65x· Plug & Play - no programming· Rapid and flexible installation with DALI addressable bus· Supply voltage via the DALI bus· Standby consumption < 0,1 W· Prodtection class IP20

This module must always be positioned as the first module on the left at the beginning of a new row of DIN rail modules. The power supply and the bus are connected to the previous rail and/or to the next rail from the rail coupling or power supply module via the contacts on the top and bottom sides.

· For flush mounting · Connect up to 10 Slavedetectors · Large detection range - 450 m2 · Setting of functions directly on the detector · Change settings via IR remote control · Potential free relay – high class · Protection class IP54 · Preprogrammed – ready for use

· For flush mounting - only Ø90 mm· 230 V AC· With integrated light sensor· Detection angle 360°· Detection range 12 m· Time delay 2 - 30 minutes· Adjustments via IR-remote (41-920)

Used with presence detectors 41-75x, 41-76x and 41-78x DALI

The product is included with black corner bracket (item 351-10172) and IR-user remote control for item 351-26570, 351-26572 (item number 351-25315).

· Only Ø36 mm· 230 V AC stand alone· Easy mounting in all suspended ceilings via the mounting brackets· Detection area up to 70 m2· IP 65 - perfect for moist areas and for outdoor use· Easy settings and adjustment via IR remote

The Minilux day/night switch is specifically designed for controlling outdoor lighting. The lighting turns on automatically when daylight decreases below the preset lux level (adjustable in the range 3 – 300 lux) and turns off when the daylight switch detects daylight above the preset level.· Discreet design· External lux-setting 3...300 lux· LED acts as adjustment aid· Handles heavy loads 3.000 W / 3.000 VA· Energy saver: turns on only when daylight is insufficient· The daylight switch can be connected to a time switch for night-time turn-off

The one channel motion detector is suitable for automatic indoor lighting control (on/off). It can be installed in a flush-mounting box in the ceiling. Spring clips and an IP54 surface-mounting box can be ordered separately. In conformity with the European directive for EMC and safety EN60669-2-1.