Niko-Servodan - sita 2

· For connection to Minilux control 36-094 · Protection class IP 54 · Lux range 3-300 lux

This switching module is used to switch six different circuits, for example, light points, socket outlets or control valves. By pushing the button, you can also control each contact manually. Using this module, you can interconnect two zero conductors, this keeps the wiring in the electricity cabinet tidy. The module is equipped with six feedback LEDs and one status LED and uses very little energy.

With this module, you can control three motor-controlled applications, such as roller blinds, curtains or awnings, for example. By pushing the button, you can also control each motor manually. The run time of the motors can be set with the programming software. Using this module, you can interconnect two zero conductors, this keeps the wiring in the electricity cabinet tidy. The module is equipped with six feedback LEDs and one status LED and uses very little energy.

This surface-mounting box with two single flexible inputs is suitable for flush-mounting one function. The entire unit is splashproof which makes it extremely well-suited for use in damp areas and in demanding environments. Colour: grey

This double vertical surface-mounting box with two single flexible inputs is suitable for flush-mounting two functions. The entire unit is splashproof which makes it extremely well-suited for use in damp areas and in demanding environments. Colour: black

· Can be used for setting motion sensor type 41-100 · Bracket for wall mounting included

This module allows you to control the heating or cooling in a maximum of four separate zones or rooms. Each zone or room should be equipped with a Niko Home Control thermostat. By pushing the button, you can also control each contact manually. The module includes five indication LEDs and one status LED, and uses very little energy.

Outdoor motion detector 16 m, 300°, white. The product is included with white corner bracket (item 351-10170) and IR-user remote control for item 351-26570, 351-26572 (item number 351-25315).

· For flush mounting - only Ø90 mm· 230 V AC· With integrated light sensor· Detection angle 360°· Detection range 12 m· Time delay 2 - 30 minutes· Adjustments via IR-remote (41-920)

This surface-mounting two-way switch is equipped with with plug-in terminals and is to be mounted in a splashproof, surface-mounting box. The entire unit is splashproof which makes it extremely well-suited for use in damp areas and in demanding environments. Colour: white. The Niko Hydro products are not suitable for use in ammonia rich environments (e.g. pig houses).

· Setting Minilux sensor PIR 41-400/41-445· Bracket for wall mounting included

This push button allows you to perform four operations. It is attached to the wall-mounted printed circuit board via a click mechanism. Switch including button. Finishing colour: white.

This motion detector is suitable for outdoor use, for example, along the driveway, on the terrace or in the garden. It is also equipped with a built-in light sensor. You aim the motion detector wherever you wish and partition the detection area using a cover mask. The Niko Home Control system supplies power to the device. Finishing colour: white

The push-button interface converts a switching pulse from an external push button into a Niko Home Control bus command. The interface has four inputs for the connection of a maximum of four potential-free NO or NPN inputs. The output is connected to Niko Home Control and can also be interconnected to the next control element.

· 230 V AC · For mounting on the ceiling · Connect up to 10 slave-detectors · Large detections range up to 450 m2 · Small movements in a range of 9 m2 · Setting of functions directly on the detector · Change settings via IR remote control · 2 channel potential free relay - high class · IP 54 protection class

Flush mounting box for 41-400, 41-700, 41-702, 41-770, 41-772, 41-800 and 41-802

SOUND DAMPER PMU-10 H 1-10 V, white

· For surface mounting on ceiling · Connect up to 10 Slavedetectors · Large detection range - 450 m2 · Setting of functions directly on the detector · Change settings via IR remote control · Potential free relay – high class · Protection class IP54 · Preprogrammed – ready for use

· Central Wireless · Sensor PIR Wireless · Adapter for central · Adapter for sensor PIR · 230 V AC

· 230 V AC· 360° detection area· Covers 140 m2· Small motion sensor within 9 m2· Manual operation possible

This surface-mounting two way switch is equipped with with plug-in terminals and is to be mounted in a splashproof, surface-mounting box. The entire unit is splashproof which makes it extremely well-suited for use in damp areas and in demanding environments.Colour: black. The Niko Hydro products are not suitable for use in ammonia rich environments (e.g. pig houses).

· For the danish switch system· 230 V AC· Detection area 180°/20 m2· Can be combined with push buttons· Connect up to 10 Slave detectors· Constant ON for 2 hours· Settings for time and lux are hidden

Cover IP 54 for 41-262/272/274

· Dimming of all dimmable lamps - also LED· Only 17.5 · 5-350 W· Max. 10 lamps 10

The Minilux day/night switch is specifically designed for controlling outdoor lighting. The lighting turns on automatically when daylight decreases below the preset lux level (adjustable in the range 2 – 200 lux) and turns off when the daylight switch detects daylight above the preset level.· Discreet design· Handles loads up to 3.000 W / 3.000 VA· Luxrange 2..200 lux internal (Can't be altered by third party)· Test button· Can be turned off during night time by using a timer