ABB Intelligenta bygginstallationer

ABB KNX IP router connects the KNX bus with the Ethernet network. The device uses the KNXnet/IP protocol for communication (Routing and Tunneling).It can be used as a fast line and area coupler. The full filter table for main groups 0-31 is supported.KNX devices can be programmed via the LAN using ETS. For this and further clients 5 Tunneling Server are available.DIN 90X36X64 mm (H x W x D)The IP address can be fixed or can be received from a DHCP server. Power supply via 12..30 V DC or PoE.The KNX Standard Communication (Multicast) can be switched off. In this case, up to 10 IPR/S3.1.1 can communicate using unicast communication.

ABB KNX DALI-Gateway, Basic, 2-foldFor controlling DALI devices via ABB i-bus®. Two DALI outputs. Max. 2x64 DALI slaves (incl. emergency devices acc. EN 62386-202). Status feedback a control happens via KNX per DALI slave, group, Broadcast. Szene-, slave-, staircase-, force and block-fct.

Power Supply, 640 mA, MDRCwith integrated choke and additional 30 V DC output to supply a second line in connection with a separate choke with ABB i-bus® system voltage. With two-coloured status indicator and wide range input from 85...265 V AC, 50/60 Hz

ABB 6131/31-24-500 Vit Plast

For controlling DALI devices via ABB i-bus®. One DALI output. Max. 64 DALI slaves (incl. emergency devices acc. EN 62386-202). Status feedback and control happens via KNX per DALI slave, group or broadcast. Szene-, slave-, staircase-, force and block-fct.