Förare, Spolar & Transformatorer - sita 3

1-phase lighting transformer for 12 Volt halogen lighting, designed and manufactured as safety transformer according to EN61558-2-6. CE mark. Plastic encapsulated and embedded in self-extinguishing polyurethane. Insulation class II - double insulated. Short-circuit-proof and protected against overload with built-in PTC fuse. High and low output voltage. Compact size and easy mounting on ceiling or wall. Standard version is supplied with 2 meter primary cable w / plug. Can be dimmed with dimmer designed for transformer load. Scope: The compact format of the HaloPower Mini series makes it very useful in the furniture industry and in residential and kitchen appliances. Clamp connection max. 4mm2. Possibility of 6 outputs with Halo-Power Mini circuit board. Do not mount in insulation material due to heat.

An energy-efficient solutionHF-Performer III TL-D is a slim and high-frequency electronic ballast for TL-D fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Product Benefits • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Smart power ensures constant light, irrespective of mains-voltage fluctuations • Suitable for luminaires in protection class I and, after testing, class II • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Application • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lots

20W driver for LED track with 3000 mm cable and sockets.1-10V dimming.Impulse dimming.NB! Not phase dimming.SG provides 5 year system warranty on the product, which is effective from commissioning.

LED Transformer 24 V (DC)/15 W
24 V DC for LEDs upt to 15 W total load

Product benefits: Long lamp lifeNo adverse effect from frequent on/off switchingAutomatic restart after lamp replacementPerfect lamp start for applications with motion sensorsVDE/VDE EMC certified systemVery high energy efficiency due to cut-off technologyAreas of application: Open-plan offices, corridors and storage roomsPublic buildingsStrip lightingSuitable for emergency lighting (DC operation)Suitable for luminaires of protection class I

Transformer 70/1-KT mini 70VA Product description: Single-phase lighting transformer for 12 Volt halogen lighting, designed and manufactured as a safety transformer according to EN61558-2-6. CE marked. Encased in plastic and cast in self-extinguishing polyurethane. Insulation class II - double insulated. Short-circuit proof and protected against overload...

Snappy LED power supply, 250W, 24Vdc and IP20.Slim LED driver.

LED Transformer 24 V (DC)/20 W
24 V DC for LEDs upt to 20 W total load

Energy-efficient, narrow frame LED panel for a modern look. A high-quality all-round panel that can be used in all types of environments. Can be installed in ceilings with visible T-rails without accessories and in ceilings with hidden T-rails with accessories. Very low glare opal prismatic shielding, UGR <18. Phase attenuation or DALI depending on which driver is selected (driver and emergency light box are ordered separately).

Dimming the next step in energy savingThis intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the system’s mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. Product Benefits • Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) – combined with MASTER TL5 Eco the most energy-efficient solution • HF operation improves light quality and lamp lifetime. • Compliant with European and Asian norms and suitable for emergency lighting systemsProduct Features • HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly • Programmed start: flicker-free ignition < 1.0 second and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations and dimming from 1 to 100% • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement • Programmable for intelligent functionalities via Philips MultiOne: Corridor mode, Emergency DC dim level, Burn-in timeEnvironment • The HF-R intelligent will recognize which lamp is connected and will drive it accordingly • Extremely low energy consumption in stand-by (0.25 W) • Optimized for MASTER TL5 Eco lamps • RoHS and ISO 14000-compliant • EEI = A1 BAT (Best available technology)Application • Indoor, general and task lighting applications in combination with lighting control systems (personal con

Mean Well DALI LED power supply, 150W, 24Vdc and IP67.LED driver.

Inverter series is distinguished by it can be delivered in 2 different mounting compact or book form as required very high motor control in open loop

Dimming the next step in energy savingThis intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the system’s mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. Product Benefits • Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) – combined with MASTER TL5 Eco the most energy-efficient solution • HF operation improves light quality and lamp lifetime. • Compliant with European and Asian norms and suitable for emergency lighting systemsProduct Features • HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly • Programmed start: flicker-free ignition < 1.0 second and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations and dimming from 1 to 100% • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement • Programmable for intelligent functionalities via Philips MultiOne: Corridor mode, Emergency DC dim level, Burn-in timeEnvironment • The HF-R intelligent will recognize which lamp is connected and will drive it accordingly • Extremely low energy consumption in stand-by (0.25 W) • Optimized for MASTER TL5 Eco lamps • RoHS and ISO 14000-compliant • EEI = A1 BAT (Best available technology)Application • Indoor, general and task lighting applications in combination with lighting control systems (personal con

Mean Well LED power supply, 320W, 24Vdc and IP67.LED driver is suitable for both indoor and outdoor use and wet rooms due. IP protection class is 67.

HF-Performer Intelligent for Master and ECO TL5 HE/HO, TL-D andPL-L lampsHF-Performer Intelligent features automatic recognition ofthe connected lamp and is independently able to adjust its operationparameters exactly to the respective lamp. This results in a substantialbenefit, especially for T5 lamps, as it means TL5 HE and HO lamps ofthe same length can be interchanged.With a choice of seven ballasts,the customer is able to handle efficiently every possible combinationof Master TL5 and Eco, TL-D, and PL-L lamps.

LED Transformer 12 V (DC)/50 W
12 V DC for LEDs upt to 50 W total load

Driver 18W 350 mA är en dimbar driver som levereras med en fördelningsbox med 6 utgångar för praktisk belysningsinstallation.

Denna driver är utformad för användning med vanliga dimmers på marknaden och tillhör en driverserie som finns i 4W, 9W, 18W och 25W-versioner.

• 18W-driver med 350 mA-utgång
• Dimbar med vanliga dimmers
• Inkluderar fördelningsbox med 6 utgångar

Ett funktionellt val för att ansluta och dimra kompatibla belysningsinstallationer.

Fördelningsbox för LED-driver ger snabb och korrekt anslutning av produkter som Sofia LED-minidownlights, med stöd för seriekoppling vid 350 mA.

Boxen monteras på sekundärsidan av LED-drivern och är utformad för att förenkla anslutningsuppsättningen för flera anslutna LED-produkter.

• För användning med LED-drivers
• Stödjer seriekoppling vid 350 mA
• Möjliggör anslutning av upp till sex produkter
• Lämplig för installationer med Sofia LED-minidownlight

En praktisk driver-fördelningsbox för att skapa en ren och korrekt LED-anslutningsuppsättning.

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

Schneider Electric ATV12HU22M2 frekvensomriktare

Schneider Electric ATV320U22N4B frekvensomriktare

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

• LED driver for cabinet lighting and mini downlights (350mA), 6 outputs
• Dimmable – leading or trailing edge
• Built-in thermofuse with auto reset
• Quick and easy installation
• Can be fastened by screws
• Do NOT plug in any LED lamps, when connected to power

Snappy LED power supply, 75W, 24Vdc and Ip20LED driver.

Variable Speed Drive 15kW 3x400 - 480V IP55 THDi på 44% build in switch Ethernet & Modbus and power meter