Förare, Spolar & Transformatorer - sita 2

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

LED Transformer 24 V (DC)/50 W
24 V DC for LEDs up to 50 W total load

Constant Current LED Driver / 30 W
dimmable, 12 V DC for LEDs up to 30 W total load

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

Small downlight with polished reflector for windows, cabinets and niches to give a nice moodful light. Nano is available at 15 or 36 degrees and Nano Tilt, which can be directed, has a 36 degree spread angle.Delivered without driver. Nanodriver (optional) with max 9W and dimmed with 1-10V / pushdim.

Electronic ballast for HF-spole til 2x14, 21, 28, 35S T5

For flexibility in luminaire design and stock-keeping managementHF-Performer Intelligent for Master and ECO TL5 HE/HO, TL-D and PL-L lampsHF-Performer Intelligent features automatic recognition of the connected lamp and is independently able to adjust its operation parameters exactly to the respective lamp. This results in a substantial benefit, especially for T5 lamps, as it means TL5 HE and HO lamps of the same length can be interchanged. With a choice of seven ballasts, the customer is able to handle efficiently every possible combination of Master TL5 and Eco, TL-D, and PL-L lamps. Product Benefits • Maximum reliability in system operation, and flexibility for designers, operators and facility managers in terms of stock-keeping management • Multi-power technology for precise operation of multiple lamp types of various wattages • Optimized for high maintenance efficiency and reliability: 5-year warrantyProduct Features • Highest CELMA Energy Efficiency I

Product features • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Life time: >100,000 h (for T = 65°C at Tc) • Energy Efficiency Index EEI: A2 BAT • Automatic shutdown of defective lamps and at end of life (EoL) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929 • RI suppression: to EN 55015:2006+A1:2007+A2:2009/CISPR 15 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Perfect lamp start for applications with motion sensors • Automatic restart after lamp replacement

Sense driver kit.DALI dimming.50,000 hours life.IP20, KL II.Driver and panel coupled via quick coupler, and drives attached top panel via double stick down pillow, with an optional location for easy installation.Driver kit incl. mounting box with tool-free mounting with quick clips and strain relief.SG SECURITY with 5 year guarantee on the luminaire and lamp.FITS TOSENSE OPAL 3000/4000 LED 3000K, 22W, 2702 lumensSENSE OPAL 3000/4000 LED 4000K, 22W, 2816 lumensSENSE PRISM 3000/4000 LED 3000K, 22W, 2619 lumensSENSE PRISM 3000/4000 LED 4000K, 22W, 2741 lumensACCESSORIESWinsta WAGO connectors with 2 or 4 meter cable.

ECG for FL and CFL - not dimmable. Product benefits: • Long lamp life • No adverse effect from frequent on/off switching • Automatic restart after lamp replacement • Perfect lamp start for applications with motion sensors • VDE/VDE EMC certified system • Very high energy efficiency due to cut-off technology • Areas of application: • Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100, industry, open-plan offices, corridors and storage rooms, public buildings, sports halls and factories, strip lighting • Suitable for emergency lighting (DC operation) • Modernization of existing systems. Product features: • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate) • Energy Efficiency Index EEI: A2 BAT • Automatic shutdown of defective lamps and at end of life (EoL T.2) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929

Printkort G3642E miniprint 6/K for noratel

Driver 25W 350 mA är en dimbar driver som levereras med en fördelningsbox med 6 utgångar för praktisk installation.

Drivern ingår i en serie som finns i 4W, 9W, 18W och 25W, och är utformad för användning med vanliga ljusdimmers på marknaden.

Ett lämpligt val när du behöver en 25W-driver med dimningsstöd och flera utgångsanslutningar.

Driver 9W 350 mA är en dimbar driver som levereras med en fördelningsbox med 6 utgångar för flexibla belysningsanslutningar.

Denna driverserie är kompatibel med vanliga ljusdimmers på marknaden och finns i 4W, 9W, 18W och 25W-versioner.

Den erbjuder en praktisk lösning för kontrollerade, dimbara belysningsinstallationer.

Schneider Electric ATV320D15N4B frekvensomriktare Svart

Philips 913700698466 övrigt

Mean Well LED power supply, 200W, 24Vdc and Ip67.LED driver is suitable for both indoor and outdoor use and wet rooms due. IP protection class is 67.

Mean Well LED power supply, 150W, 12Vdc, IP67.The power supply is adjusted up to 13Vdc as a special item.LED driver is suitable for both indoor and outdoor use and wet rooms due. IP protection class is 67.

Snappy LED power supply, 20W, 24Vdc and IP20Super slim LED driver.

Schneider Electric ATV630D30N4 övrigt

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

1-phase lighting transformer for 12 Volt halogen lighting, designed and manufactured as safety transformer according to EN61558-2-6. CE mark. Plastic encapsulated and embedded in self-extinguishing polyurethane. Insulation class II - double insulated. Short-circuit-proof and protected against overload with built-in PTC fuse. High and low output voltage. Compact size and easy mounting on ceiling or wall. Standard version is supplied with 2 meter primary cable w / plug. Can be dimmed with dimmer designed for transformer load. Scope: The compact format of the HaloPower Mini series makes it very useful in the furniture industry and in residential and kitchen appliances. Clamp connection max. 4mm2. Possibility of 6 outputs with Halo-Power Mini circuit board. Do not mount in insulation material due to heat.