EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve program is especially to use in closed circuits with low differential pressure, but demanding moderate flow rates. Valve body in dezincification res

Danfoss KP pressure switches are used for regulating, monitoring and alarm systems in industrial applications. The KP series are suitable for gaseous media and air. They are fitted with a single-pole switch changeover (SPDT), and can control single-phase

The Danfoss AMZ 112 zone valve DN 20, with a voltage of 230V and a kvs value of 41, is a two-way zone valve used in central and district heating systems for ON/OFF regulation of individual or multiple heating/cooling surfaces. The motor can be controlled by an SPST contact set with closing function or an SPDT switch. Additionally, the motor is equipped with an end switch. The valve has a nominal diameter of 20 mm and a kvs value of 41.

The FJVR valve is only used in connection with the return flow thermostat FJVR. The FJVR valve is mounted in the outlet of the radiator or floor heating circuit.

Devi fitting

Valves with pre-setting are used in water-borne two-line systems to ensure optimal distribution of the water in the heating system. Pre-set.

Service element for replacement on AVTA and AVTB thermostatic valves.

MBS 1700, Pressure transmitter for general purpose,Pressure transmitter, type MBS 1700 is designed to a variety of applications and easy installations within the distributor market. The transmitter offers highly reliable pressure measurement, ensuring that even the slightest change is detected immediately.,•4 – 20 mA output signal,•Measuring range 0 - 25 bar,•Pressure connection G1/4 EN 837 and G 12 EN 837,•Temperature compensated and laser calibrated,•Excellent vibration stability,•Easy installation – fit and forget

Danfoss AME 435 actuator. AMV 435 is an actuator for three point control and AME 435 is an actuator for modulating control. The advanced design incorporates load related 'switch-off' to ensure that neither actuators nor valves are not exposed to overloa

Danfoss AB-QM tailpieces. Union connection, 1 pcs.

Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system

Danfoss VRB2 15 2-way seated valve kvs 4,0. 2-way seated valve with logarithmic characteristic which provides a high quality cost effective solution for most hot water and chilled water applications.

Danfoss SSM underfloor heating manifold in stainless steel with output for 10 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

The ERC 211 is a smart multipurpose refrigeration controller with temperature and defrost management, available with 1 relay.The controller has been designed to fulfill today’s requirements of commercial refrigeration applications.

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

VLT® AutomationDrive is made on a modulized platform, which makes it easy to adjust to any need. With the VLT® AutomationDrive-series, you get unsurpassed operational reliability and an intelligent plug-and-play-technology, that makes it easy to programme and operate the frequency converter.

EV210B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV210B is a real robust valve program with high performance and can be used in all kind of tough working conditions.

Pressure switch 060-110166 from DANFOSS A/S

For those who want to control the system via a smartphone AppFeatures App module • Wi-Fi connection• Android App• Apple App• Change temperatures• Change time schedule

Danfoss AVP differential pressure controller. Self-acting differential pressure controller primarily for use in district heating systems. The controller closes on rising differential pressure. The controller has a control valve, an actuator with one cont

Danfoss 087B1182 rörmokeritillbehör

Danfoss AVTQ thermostatic valve. Self-acting flow-compensated temperature controller primarily for use in district heating systems with plate heat exchangers for instantaneous hot water production. The controller closes on rising sensor temperature.

Danfoss 060-310366 rörmokeritillbehör

Danfoss RA-U valve. Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system. Pre-setting valves are available for normal and low flows and for reversed flow

Danfoss 013G4125 rörmokeritillbehör