Demanding applications, with IP67, for valve range B, 10W ac / 18W dc, IP67The coil fits to all Danfoss soleniod valves with armatures system type B = 13,5 mmEG. EV210B, EV220B,EV250B, EV224B,EV222B

KP thermostats are used for regulation, monitoring and alarm systems in industry. The KP series is equipped with a single-pole changeover contact. The thermostat is equipped with a 1-pole switch (SPDT), and can control a 1-phase ac motor up to 2 kW directly.

Paket innehållar: 
- 1 styck Danfoss Ally Startpaket
- 2 stycken Danfoss Ally Radiatortermostat

Gasket for RAV, RAVL AND FJVR valve

Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system

For those who want to set the desired temperature and see current temperature.Features wireless display thermostats• Temperature range limitation• Wireless 2-way communication• Touchscreen control• Icon-based navigation• Noiseless switching• Battery (2 x 1,5V) powered

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

Danfoss gasket for RA2000 and FJVR (From 2005) Also suitable for valves from danfoss on one-line systems.

Danfoss Icon2 Antenn

Danfoss 088U2120 termostater ZigBee Vit

Valves with pre-setting are used in water-borne two-line systems to ensure optimal distribution of the water in the heating system. Pre-set.

EV220B 6-22 is a direct servo-operated 2/2-way solenoid valve program with connections from 1/4" to 1". This program is especially for OEM applications demanding a robust solution and moderate flow rates.

Union for the seat valves VRB and VRG.

Värmeställdon, kabelansluten

Danfoss Dynamic Valve™ is an innovative two-in-one radiator valve.

For those who want to control the system via a smartphone AppFeatures App module • Wi-Fi connection• Android App• Apple App• Change temperatures• Change time schedule

Danfoss 140F0416 golvvärmesystem

Danfoss TWA-A thermal actuator 230V NC. The thermal actuator TWA-A range is used with electrical on/off-controls to activate several types of Danfoss valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the

DEVIreg TM 330 is a series of simple electronic thermostats for installation in cabinets withDIN rail bracket. To measure and control the desired temperature, either one must be usedwiring sensor (in the kit) or an external or space sensor. The thermostat must be installedafter a multi-pole switch. It has an LED indicator that shows standby periods (green light) andheating periods (red light).DEVIreg TM 330 has a relay with two contact pairs - NO (normally open) and NC (normally closed) andis intended to be used for heating and cooling systems. In addition, the NO and NC contact pairsnot supplied by a voltage source inside the thermostats and can be used forcontrol systems with any voltage up to 250 V.The series is designed with thermostats in three temperature ranges.DEVIreg TM 330 (5-45 ° C) is primarily used for controlling a lower temperature range, such as frost protection, as well as for cooling, comfort floor heating, total (direct)underfloor heating, ice and snowmelt on the ground, frost protection on roofs, pipe protection etc. The thermostat has a button for adjusting the temperature setting with ascale from 5 ° C to 45 ° C. This type has temperature drop in economy period mode using an external timer.

Danfoss range limiting pins.

Danfoss IconTM Zigbee Module, 24V/wireless. Used to connect the Danfoss Icon master controller (088U1141 or 088U1142) to the Zigbee 3.0 network and can thereby be controlled via the Danfoss Ally gateway or a 3rd party Zigbee 3.0 compatible gateway.

Danfoss Icon Master Controller 24V with 10 channels. Underfloor heating control for the Danfoss Icon series with 10 outputs for thermal actuators. Up to 10 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

Valves with pre-setting are used in water-borne two-line systems to ensure optimal distribution of the water in the heating system. Pre-set.

Danfoss TWA-A thermal actuator 24 V NC. The thermal actuator TWA-A range is used with electrical on/off-controls to activate several types of Danfoss valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the

Cable Sensor NTC15kOhm @ 25 ° C,3 mDim: Ø 5 mm,2x0,75mmSheath: blackSantoprene(TPV), IP67,Temp zone:-25 ° C to 90 ° C