CPU-fläktar - sita 34

The Intel 1851 Delid-Die-Mate Heater V1 is a specially designed heating element for the Intel 1851 Delid-Die-Mate V1. The heater raises the temperature of both the CPU and the delidder to 165°C, the necessary temperature for delidding. The operation is controlled via a control unit with an OLED display, which is connected to the heater with two cables. A laptop/smartphone charger with at least 65 watts of power and a USB Type-C connector, which is not included, is required for the heater to operate. A small amount of thermal paste is also needed.

Heating element for warming the CPU
Designed for the Intel 1851 Delid-Die-Mate V1
Follow the warning instructions!
Scope of Delivery:

1x Intel 1851 Delid-Die-Mate Heater V1
1x Angle wrench
1x TG Cleaning Wipes
1x Kryonaut, 1g
Warning Instructions:

Note: When delidding with the Intel 1851 Delid-Die-Mate V1, the CPU should be heated to 165°C (the melting point of indium is 157°C) to liquefy the indium, making it easier to remove the heat spreader. This minimizes mechanical stress on the chip and helps prevent damage. Otherwise, there is a high risk that the CPU could be damaged during delidding.

Caution: delidding a CPU can be dangerous. Any damaged caused by this will not be covered by warranty. Make sure to ressearch how to before trying. 

Thermal Grizzly Minus Pad Extreme is a great choice for applications where renewing thermal paste is not an option. This is particularly useful when distances between the heat source and the heat sink need to be bridged - for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay. Compared to Minus pad 8 the thermal conductivity was improved by about 260 %.

• Most excellent thermal conductivity
• No bleeding
• long-term stability
• high compression rate

The minus pad extreme is available in size 120 x 20 mm and 100 x 100 mm with thicknesses of 0,5mm, 1mm, 1,5mm, 2mm, 3mm. See variants for various sizes and thickness. 

NB: Due to the consistency only one-time use is recommended 

Thermal Grizzly Minus Pad Extreme is a great choice for applications where renewing thermal paste is not an option. This is particularly useful when distances between the heat source and the heat sink need to be bridged - for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay. Compared to Minus pad 8 the thermal conductivity was improved by about 260 %.

• Most excellent thermal conductivity
• No bleeding
• long-term stability
• high compression rate

The minus pad extreme is available in size 120 x 20 mm and 100 x 100 mm with thicknesses of 0,5mm, 1mm, 1,5mm, 2mm, 3mm. See variants for various sizes and thickness. 

NB: Due to the consistency only one-time use is recommended 

Processor liquid cooling system with 240 mm aluminum radiator, dual 120 mm ARGB fans, PWM control and broad socket compatibility.

DeepCool LE240 WH V2 is a white AIO cooler that pairs an aluminium 240 mm radiator with ARGB top cover and Anti-leak Tech for stable, visually customizable cooling.

• Radiator: 240 mm (282 x 120 x 27 mm), aluminium


• Dual 120 mm ARGB fans, 25 mm height, Hydro Bearing


• Fan speed 500–2100 rpm with 75.89 cfm airflow and 2.53 mm air pressure


• Noise level 31.6 dBA


• Connectors: 4‑pin PWM + 3‑pin ARGB; PWM support


• Compatible with LGA1700, LGA1200, LGA1151, LGA1150, LGA1155, Socket AM4, Socket AM5, LGA1851

Provides controlled cooling, customizable ARGB lighting and wide motherboard compatibility for modern builds.

Kylfläns för processor, kundkit, för PowerEdge R760xs

Thermal pads offering improved thermal conductivity, high compressibility and electrical non-conductivity for reliable heat transfer on SSDs, GPU coolers and electronic components.

The Minus Pad Advance series refines proven Minus Pad technology to deliver easy-to-use, conformable pads that enhance heat transfer while remaining electrically non-conductive.

• Excellent thermal conductivity


• High compressibility for gap filling


• Electrically non-conductive


• Easy to use


• Suitable for SSDs, GPU coolers, GPU water coolers, voltage regulators and memory modules


• Black color

Designed to improve thermal contact between components and heatsinks for more consistent cooling performance.

Uppgradera monteringssats till Noctua SecuFirm2+-standard med Torx-skruvar för bättre CPU-temperaturer - på AM5 kan offsetmonteringssatsen minska CPU-temperaturerna med 1-3°C. Liksom alla SecuFirm2-fästen kombinerar den enastående tillförlitlighet, optimalt kontakttryck och enkel, okomplicerad installation. Inklusive Noctua magnetspets NM-SD1 Torx T20 skruvmejsel. Färg: chromax black

Kompatibla kylare: NH-D15 (SE-AM4, chromax.black), NH-D15S (chromax.black), NH-D14 (SE2011), NH-D9L (chromax.black), NH-C14, NH-C14S, NH-C12P (SE14), NH-L12, NH-U12, NH-U12F, NH-U12P (SE1366, SE2), NH-U9, NH-U9F, NH-U9B (SE2), NH-L9x65 (SE-AM4, chromax.black), NH-P1 (vänligen kolla Noctuas hemsida för framtida kylare)

Kylsystem med vätska till processorn, Elementstorlek: 240 mm, (för: LGA1156, LGA1155, LGA2011, LGA1150, LGA2011-3, LGA1151, AM4, LGA2066, LGA1200, LGA1700, AM5), koppar, 120 mm

CPU-kylare, luftkylare, kompatibel med AMD Socket AM2 / AM2 + / AM3 / AM3 + / AM4 / FM1 / FM2 / FM2 + & Intel LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA2011 / LGA2011-V3 / LGA2066, ljudnivå: 18.6 - 22.4 dBA, Luftflöde: 43.7 - 55 CFM, kylare RPM: 300 - 1500 ± 10%, PWM-styrd, 120mm kylare, med nickelpläterad koppar CPU-kontaktyta, CPU max TDP: 140 watt, svart

Vätskekylsystem för processor med en 360 mm radiator, kopparbas och 3 120 mm ARGB-fläktar (500–2000 rpm) för effektiv kylning och anpassningsbar belysning.

Chieftec Iceberg 360 har en roterbar infinity-spegeleffekt pumpkåpa, stöd för PWM och adressbar RGB samt inkluderar ett komplett monteringskit för bred sockelkompatibilitet.

• 360 mm radiator med koppar värmeabsorberande bas och aluminiumradiator


• 3 120 mm ARGB-fläktar — 500–2000 rpm, 64.72 cfm, 34.7 dBA


• Kompatibel med LGA1150/1151/1155/1156/1200/1700/1851 och AM2/AM2+/AM3+/AM4/AM5/FM1/FM2/FM2+

Ger pålitlig CPU-kylning och anpassningsbar ARGB-belysning för moderna datorbyggen.

Thermal Grizzly Minus Pad Extreme is a great choice for applications where renewing thermal paste is not an option. This is particularly useful when distances between the heat source and the heat sink need to be bridged - for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay. Compared to Minus pad 8 the thermal conductivity was improved by about 260 %.

• Most excellent thermal conductivity
• No bleeding
• long-term stability
• high compression rate

The minus pad extreme is available in size 120 x 20 mm and 100 x 100 mm with thicknesses of 0,5mm, 1mm, 1,5mm, 2mm, 3mm. See variants for various sizes and thickness. 

NB: Due to the consistency only one-time use is recommended 

Thermal paste

CPU-vätskekylare Thermaltake TH360 V3 ARGB Sync kombinerar allt-i-ett-vätskekylning med ARGB-belysning, ett pumpblock med infinity mirror, PWM-fläktar upp till 2500 RPM och RGB-synkronisering med moderkortet.

Denna svarta processorvätskekylare har ett avtagbart pumptopplock för justering av orienteringen, en fläktdesign i en ram för enklare kabelhantering och en slimmad radiator med förtjockad kopparkammare.

• Allt-i-ett CPU-vätskekylare
• ARGB-fläktar med upp till 2500 RPM
• Infinity mirror-pumpblock
• Avtagbart topplock för logotyporientering
• 27 mm slimmad radiator med 20 mm kopparkammare
• Stöder 5V adresserbara RGB-kontakter på moderkortet

Byggd för livfull systembelysning och stark värmeöverföring från CPU hjälper den till att färdigställa ett rent, upplyst PC-bygge.

CPU-kylare, luftkylare, kompatibel med AMD Socket AM2 / AM2 + / AM3 / AM3+ / AM4 / FM1 / FM2 / FM2+ & Intel LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200 / LGA2011 / LGA2011-V3 / LGA2066, ljudnivå: 16.3 - 22.8 dBA, luft flöde: 46.4 CFM, kylare varvtal: 400 - 2000 ± 10%, PWM styrd, 92 mm fläkt, med nikkelpläterad koppar CPU-kontaktyta, svart

Processorkylare, (för: AM4), aluminium, 60 mm

Processorkylare, (för: LGA775, AM2+, LGA1366, AM3+, FM1, FM2+, LGA2011-3, LGA2011 (Square ILM), AM4, LGA2066, LGA1200, LGA1700, AM5, LGA115x Socket), 140 mm, svart

Kylsystem med vätska till processorn, (för: LGA775, LGA1156, AM2, AM2+, AM3, LGA1155, AM3+, LGA2011, FM1, FM2, LGA1150, LGA1151, AM4, LGA2066, LGA1200), koppar, 120 mm

Processorkylare, (för: LGA775, LGA1156, AM2, AM2+, LGA1366, AM3, LGA1155, AM3+, FM1, FM2, LGA1150, FM2+, LGA2011-3, LGA1151, LGA2011 (Square ILM), AM4, LGA2066, LGA1200, LGA1700, AM5), 120 mm, svart

Kylsystem med vätska till processorn, Elementstorlek: 240 mm, (för: LGA2011-3, LGA2011 (Square ILM), AM4, LGA2066, LGA1200, LGA1700, AM5, LGA115x Socket), 120 mm

CPU-kylare, vattenkylningssystem, kompatibel med AMD Socket AM4 / AM5 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200 / LGA1700 / LGA1851, ljudnivå: max 38.71 dBA (fläkt) / max 21 dBA (pumpe), RPM fläkt: 600 - 2400 ± 10%, fläkt CFM: max 72.04, statiskt tryck: max 3.48 mmH₂O, PWM-kontrollerad, 282mm radiator med 2 x 120mm RGB Fläktar, 4-pins PWM & 3-pins ARGB förbindelse, inklusive kylpasta, svart med RGB (kontrollerad av: Asrock Polychrome Sync / Gigabyte Fusion / MSI Mystic Light)•

Kylsystem med vätska till processorn, Elementstorlek: 360 mm, (för: LGA1156, AM2, AM2+, LGA1366, AM3, LGA1155, AM3+, LGA2011, FM1, FM2, LGA1150, LGA2011-3, LGA1151, AM4, LGA2066, LGA1200), 120 mm

Monteringssats för processorkylare, (Socket AM4)

CPU-kylare, vattenkylningssystem, kompatibel med AMD Socket AM4 / AM5 / TR4 / sTRX4 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200 / LGA1700 / LGA1851, pumpe: Asetek 7th gen, fläkt ljudnivå: 19.4 - 32.1 dBA, RPM fläkt: 500 - 1500 ± 10%, fläkt CFM: 33.22 - 99.68, statiskt tryck: 0.91 - 2.75 mmH₂O, PWM-kontrollerad, 315mm radiator med 2 x 140mm Fläktar, 4-pins PWM förbindelse, inklusive kylpasta, inbyggd skärm inbyggd skärm, svart (kontrollerad av: NZXT CAM)•

Kylsystem med vätska till processorn, Elementstorlek: 280 mm, (för: LGA1156, AM2, LGA1366, AM3, LGA1155, LGA2011, FM1, FM2, LGA1150, LGA1151, AM4, LGA2066, TR4, sTRX4, LGA1200), koppar, 140 mm

Modding heatsink cover for Noctua NH-U12S, NH-U12S TR4-SP3, NH-U12S SE-AM4 and NH-U12S DX-3647 CPU coolers, black