CPU-fläktar - sita 41

SilverStone Nitrogon NT07-115X - CPU Luftkylare - Max 26 dBA

Processorkylare, ( LGA1156 Socket, LGA1155 Socket, LGA1150 Socket ), aluminium med kopparbas, 80 mm

508,00 kr (406,40 kr)

Beställningsvara, 7-8 vardagar leveranstid

SilverStone NT09-1700 - CPU Luftkylare

Processorkylare, (för: LGA1700), aluminiumfenor, 95 mm

555,00 kr (444,00 kr)

Beställningsvara, 7-8 vardagar leveranstid

Tryx PANORAMA 240mm - ARGB Black - CPU Vattenkylare

CPU-kylare, vattenkylningssystem, kompatibel med AMD Socket AM4 / AM5 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200 / LGA1700 / LGA1851, pumpe: Asetek 8th Gen Solution, ljudnivå: max 27.86 dBA (fläkt) / max 25.3 dBA (pumpe), RPM fläkt: 500 - 1850 ± 10%, fläkt CFM: max 66.09, statiskt tryck: max 1.8 mmH₂O, PWM-kontrollerad, 279.5mm radiator med 2 x 120mm RGB Fläktar, 4-pins PWM & 3-pins ARGB förbindelse, inklusive kylpasta, svart med RGB (kontrollerad av: ASUS AURA / Asrock Polychrome Sync / Gigabyte Fusion / MSI Mystic Light)•Large L-shaped AMOLED Screen

3 619,00 kr (2 895,20 kr)

Leverantör, 4-5 vardagar leveranstid

Gembird Huracan X140 - processor cooler - CPU Luftkylare

Processorkylare, 120 mm

354,00 kr (283,20 kr)

Beställningsvara, 9-10 vardagar leveranstid

Thermal Grizzly Intel 1851 Delid-Die-Mate V1

The Intel 1851 Delid-Die-Mate V1 is a tool for removing the heat spreader (delidding) from Intel processors in the "Intel Core Ultra 200" series (LGA1851 socket). By removing the Integrated Heat Spreader (IHS), CPUs can be cooled using the "Direct-Die" method, where the cooler is mounted directly onto the processor chip. This enables the most efficient transfer of thermal dissipation power (TDP), or simply put, the heat, from the processor to the cooling loop.

Caution: Removing the heat spreader (delidding) of a processor is done at your own risk! Delidding the CPU voids the manufacturer's warranty! Damage caused during delidding is not covered by the manufacturer! CPU should be heated.

1 214,00 kr (971,20 kr)

Leverantör, 4-5 vardagar leveranstid

Thermal Grizzly Intel 1851 Delid-Die-Mate Heater

The Intel 1851 Delid-Die-Mate Heater V1 is a specially designed heating element for the Intel 1851 Delid-Die-Mate V1. The heater raises the temperature of both the CPU and the delidder to 165°C, the necessary temperature for delidding. The operation is controlled via a control unit with an OLED display, which is connected to the heater with two cables. A laptop/smartphone charger with at least 65 watts of power and a USB Type-C connector, which is not included, is required for the heater to operate. A small amount of thermal paste is also needed.

Heating element for warming the CPU
Designed for the Intel 1851 Delid-Die-Mate V1
Follow the warning instructions!
Scope of Delivery:

1x Intel 1851 Delid-Die-Mate Heater V1
1x Angle wrench
1x TG Cleaning Wipes
1x Kryonaut, 1g
Warning Instructions:

Note: When delidding with the Intel 1851 Delid-Die-Mate V1, the CPU should be heated to 165°C (the melting point of indium is 157°C) to liquefy the indium, making it easier to remove the heat spreader. This minimizes mechanical stress on the chip and helps prevent damage. Otherwise, there is a high risk that the CPU could be damaged during delidding.

Caution: delidding a CPU can be dangerous. Any damaged caused by this will not be covered by warranty. Make sure to ressearch how to before trying.

1 149,00 kr (919,20 kr)

Leverantör, 4-5 vardagar leveranstid