Alu pex-system - sita 21

Press coupling for DHW and radiator systems. PPSU plastic with stainless steel/aluminum press cap, guaranteed leaking if not pressed. Calibration-free. Only to be used with Uponor MLC tubes and with Uponor approved pressing tools.

Prestee PPSU Uponor 25 mm

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 32, d2: 32, d3: 32

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 25, d2: 16, d3: 20

HENCO 26X20 mm VISION push reduced coupling for water, heating- and cooling installations, max. 16 bar

Henco 26 x 16 x 26 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Used with Roth alu-laserplus pipe and Roth tools

Raxofix T-piece with SC-Contur- silicium bronze- press connectors, Rp-threadd1: 20, Rp: 12, d2: 20

Geberit Mepla T-piece, equal: d=20mm

Geberit Mepla adapter with male thread: d=20mm, R=1/2

Raxofix Adapter with SC-Contur- silicium bronze- press connection, R-threadd: 16, R: 12

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 25, d2: 25, d3: 16

Raxofix Coupling with SC-Contur- Silicium bronze - press connection d1: 25, d2: 25

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Henco 63 mm x 2 PVDF press straight male adapter for water-, heating- and cooling installations. Max. 16 bar.

Henco 40 x 114 x 40 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Henco 26 mm x 1 CuSi press straight male adapter for water-, heating- and cooling installations.

Used with Roth alu-laserplus pipe and Roth tools

Uponor 1046911 rörmokeritillbehör Armbåge

Used with Roth alu-laserplus pipe and Roth tools

Geberit Mepla adapter with union nut: d=20mm, G=3/4

Raxofix Adapter with SC-Contur- silicium bronze- press connection, Rp-threadd: 16, Rp: 12

Raxofix Coupling with SC-Contur- silicium bronze- press connectiond1: 25, d2: 20

Uponor 1089776 tillbehör till manuellt rörkapningsverktyg Ersättningsblad Silver

HENCO 26X3/4 VISION push bent 90 deg. male adapter for water, heating- and cooling installations, max. 16 bar