Viega - sita 12

Sanpress Coupling with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elementsd: 15

Sanpress Reducer with SC-Contur- gunmetal or silicium bronze- plug-in end, press connectionComponentsEPDM sealing elementd1: 22, d2: 15

Viega 2218

Viega 2218

Viega 2214.2

T-piece- gunmetal or silicon bronze- Rp-threads

Viega Blok 15 mm x 1/2" with bent back pad. For solder connection, insertion dimension. 150 mm, with short redware angles, with bent holder.

Viega 2218

Viega 2318

Sanpress Inox Reducer with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing element, VdS certificationd1: 42, d2: 22

Sanpress XL Reducer with SC-Contur- gunmetal- plug-in end, press connectionComponentsEPDM sealing element, cutting ringd1: 88.9, d2: 76.1

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Viega 2218

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, R-threadComponentsEPDM sealing element, polygond: 15, R: 12

Elbow 90°- copper- soldered connection, plug-in endd: 22

Viega 2311

Viega 3241

Rosette - for WC connection elbow, WC connection pipe - plastic DN: 100, Ø: 165, H: 50, version: alpine white

Connection elbow 22.5° - for WC - plastic Components - lip sealDN: 100, L: 150, version: alpine white

Plug-in piece - gunmetal - plug-in end, Rp-thread d: 22, Rp: 12

Viega 94243G

T-piece - copper - solder connection d1: 28, d2: 22, d3: 28(quality seal for d12-54)

T-piece - copper - solder connection d1: 18, d2: 15, d3: 18(quality seal for d12-54)

Sanpress Inox Connection screw fitting with SC-Contur- steel non-corroding- press connection, G-thread- flat sealingComponentsEPDM sealing element, EPDM flat seal, union nut screw fitting, VdS certificationd: 22, G: 34

Viega 95002A