Värmekontroll - sita 2

EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve program is especially to use in closed circuits with low differential pressure, but demanding moderate flow rates. Valve body in dezincification res

Danfoss KP pressure switches are used for regulating, monitoring and alarm systems in industrial applications. The KP series are suitable for gaseous media and air. They are fitted with a single-pole switch changeover (SPDT), and can control single-phase

The Danfoss AMZ 112 zone valve DN 20, with a voltage of 230V and a kvs value of 41, is a two-way zone valve used in central and district heating systems for ON/OFF regulation of individual or multiple heating/cooling surfaces. The motor can be controlled by an SPST contact set with closing function or an SPDT switch. Additionally, the motor is equipped with an end switch. The valve has a nominal diameter of 20 mm and a kvs value of 41.

Service element for replacement on AVTA and AVTB thermostatic valves.

Danfoss AME 435 actuator. AMV 435 is an actuator for three point control and AME 435 is an actuator for modulating control. The advanced design incorporates load related 'switch-off' to ensure that neither actuators nor valves are not exposed to overloa

EV210B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV210B is a real robust valve program with high performance and can be used in all kind of tough working conditions.

Pressure switch 060-110166 from DANFOSS A/S

Danfoss AVP differential pressure controller. Self-acting differential pressure controller primarily for use in district heating systems. The controller closes on rising differential pressure. The controller has a control valve, an actuator with one cont

Danfoss 087B1182 rörmokeritillbehör

Danfoss AVTQ thermostatic valve. Self-acting flow-compensated temperature controller primarily for use in district heating systems with plate heat exchangers for instantaneous hot water production. The controller closes on rising sensor temperature.

Danfoss 013G4125 rörmokeritillbehör

Danfoss 060-310366 rörmokeritillbehör

Danfoss ECL Comfort 210 regulator 230V. The ECL Comfort 210 is an electronic weather compensated temperature controller for use in district heating, central heating and cooling systems. Combined with the intelligent ECL application keys, the controller

Danfoss AVTB thermostatic water valves. Self-acting temperature controller used to control the water temperature in hot water tanks, heat exchangers, oil preheaters, etc. The controller has a control valve, thermostatic actuator and handle for temperature

Gear motors for AB-QM, DN 40-100 Modulating 24 V ac. Running time 7.5 s/mm or 15 s/mm 3-point gear motor. Gear motors that are used together with 2- and 3-way valves VRB, VRG, VF and VL in dimensions up to DN 80.

Danfoss KP thermostats are used for regulating, monitoring and alarm systems in industry. The KP series are temperature-operated electric circuit breakers. The thermostats are fitted with a single-pole switch (SPDT), and can control single-phase ac motors

Danfoss 082H8059 rörmokeritillbehör

RT controls are used in general industrial and marine sectors. The RT temperature switch series consist of a variety of ordinary room temperature switches and remote sensor temperature switches including neutral zone temperature switches. RT temperature s

Permanent Magnetic coil 018F0091 from DANFOSS A/S

Sensor element for AVTQ with complete stuffing box

PRESSURE RELIEF VALVE 031E029866 from DANFOSS A/S

EV220B 15-50 is a universal indirect servo-operated 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless steel ensures that a broad variety of application can be covered. Built-in pilot filter as standard, adj

AB024D Coil 24V DC 5 W 9mm IP00The coil only fits the valve system A with a 9 mm actuator system

Tough applications, with IP67, 12W ac / 20W dc, IP67

Coil for soleniod valve