Rörelsesensorer och skymningsbrytare - sita 3

The Minilux day/night switch is specifically designed for controlling outdoor lighting. The lighting turns on automatically when daylight decreases below the preset lux level (adjustable in the range 3 – 300 lux) and turns off when the daylight switch detects daylight above the preset level.· Discreet design· External lux-setting 3...300 lux· LED acts as adjustment aid· Handles heavy loads 3.000 W / 3.000 VA· Energy saver: turns on only when daylight is insufficient· The daylight switch can be connected to a time switch for night-time turn-off

Product: PD4-M-1C-i (92585) Presence / motion detector LUXOMAT® PD4-M-1C as Master version for wall mounting, recessed ceiling and wall. Thick relay for ignition of lamps with high consumption especially optical system for detecting the smallest movements. You can connect an unlimited number of slaves for cheap extension of the detection area! Series production impulse function. Application examples: monitoring of large surfaces such. parking garages, gyms, warehouses, loading ramps, halls etc. Power supply voltage: 230V ~ ± 10%. Detection range: 360 ° Range (around) m: - sitting Ø 6.40 m - across Ø 24.00 m - head Ø 8.00 m Protection: IP20 / Class II / CE. Dimensions: Ø 97 x H 103 mm. Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high-quality. Channel 1 (light control) Max Load: 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5. Time settings: 15 sec. - 30 min. or pulse Brightness Value: 10-2000 Lux. Power consumption:> 0.5W.

Product: Socket IP54 for PD2-P (92161) With this backing, the IP class of the presence detector PD2 und PD4 (version for mounting on fixed ceiling) increased from IP20 to IP54. Dimensions in mm: Approximately Ø 100 x H 15 Material of UV-resistant polycarbonate high quality

Hager EE840 tillbehör för elkapsling

The one channel motion detector is suitable for automatic indoor lighting control (on/off). It can be installed in a flush-mounting box in the ceiling. Spring clips and an IP54 surface-mounting box can be ordered separately. In conformity with the European directive for EMC and safety EN60669-2-1.

Product: PD3-1C-i (92197) Motion detector LUXOMAT® PD3-1C-i, recessed ceiling and wall. A channel for ignition of light. Thick relay for ignition of lamps with high consumption. In particular, an optical system for detecting the slightest movements. Series production impulse function (gong). Application examples: monitoring of smaller surfaces such. stairwells, private garages, lobbies, restrooms. Power supply voltage: 230V ~ ± 10%. Detection range: 360 °. Range (around) m: across Ø 10.00 m, head-Ø 6.00 m. Protection: IP44 / Class II / CE. Dimensions: Ø 83 x H 81 mm Ambient temperature: -25 ° C to + 50 ° C Housing: UV-resistant polycarbonate high-quality. Channel 1 (light control) Max Load: 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5. Time settings: 30 sec. - 30 min. or pulse Brightness Value: 10-2000 Lux. Power consumption:> 0.5W

Product: PD4-M-1C-P (92580) Presence / motion detector LUXOMAT® PD4-M-1C as Master version for fixed installation on walls, ceilings or PL-box. A omskiftningskanal to light (potential). Thick relay for ignition of lamps with high consumption especially optical system for detecting the smallest movements. You can connect an unlimited number of slaves for cheap extension of the detection area! Series production impulse function. Application examples: monitoring of large surfaces such. parking garages, gyms, warehouses, loading ramps, halls etc. Power supply voltage: 230V ~ ± 10%. Detection range: 360 ° Range (around) m: - sitting Ø 6.40 m - across Ø 24.00 m - head Ø 8.00 m Protection: IP20 / Class II / CE. Dimensions: Ø 97 x H 103 mm. Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high-quality. Channel 1 (light control) Max Load: 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5. Time settings: 15 sec. - 30 min. or pulse Brightness Value: 10-2000 Lux. Power consumption:> 0.5W

LED outdoor floodlight, 20 W, with motion sensorwith 1700 lm, neutral white light (4000 K), PIR sensor with ON / OFF function and M16 cable gland, sui...

Product: LC-plus 280 (91028) black. Motion sensor, which is electronically controlled by a microprocessor with 360 ° creep zone for a complete detection. Adjustable ball head optics. Uncovering not desired detection zones while placing infinitely displaceable guard, which all detection zones below 280 °, for example. 90 °, 130 ° or 230 °, can be realized. cover 360 ° - creep zone included. Setting the twilight threshold and delay time with two potentiometers on the ball head underside. Factory preset program for immediate deployment with twilight setting at approximately 20 lux and a delay time of 3 minutes. Wall or outer corner with special socket (provided). Application examples: monitoring two house sides simultaneously, garage or driveways, husindgange. Power supply voltage: 230V ~ ± 10%. Detection range: 280 °. Range (around) m: max. 16 m by moving across the detection area (tangential). Protection: IP44 / Class II / CE. Dimensions: L 100 x W 68 x H 78 mm. Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high-quality. Remote controllable: IR-LC-plus, IR-LC-Mini Channel 1 (light control). Max Load: 2000 W, power factor measure = 1, 1000 W, power factor measure = 0.5. Time settings: 15 sec. - 16 min .. Brightness Value: 2-2500 Lux.

· For the danish switch system· 230 V AC· Detection area 180°/20 m2· Can be combined with push buttons· Connect up to 10 Slave detectors· Constant ON for 2 hours· Settings for time and lux are hidden

Product: PD4-S-GH-P (92265) Presence detector LUXOMAT® PD4-S- GH, Slave with oval detection range and the range for mounting in fixed ceiling or PL dåse.Stort savings potential especially in large spaces and in monitoring of large surfaces. It requires only a Master of ignition of light and ventilation Possibility of detection of movement in all local segments with slaves pulse signal to the Master of detected movement. Detection of movement independent of the ambient brightness. No setting items on the Slave. Sensor and præstationsdel in a cabinet. Application examples: monitoring of warehouses and warehouse with high racks, where the mounting height is great. Power supply voltage: 230V ~ ± 10%. Detection range: 360 ° .Rækkevidde (approximately) im - across Ø 44.00 m. Protection: IP20 / Class II / CE. Dimensions: Ø 98 x H 63 mm Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high quality Slave output Slave device: 230 V. Power consumption:> 0.5W.

LED outdoor floodlight, 50 W, with motion sensor
with 4250 lm, neutral white light (4000 K), PIR sensor with ON / OFF function and M16 cable gland, suitable for outdoor use (IP44)

Very bright and functional LED outdoor light in a compact design for house entrances, garages, carports and access routes
Quick and easy assembly thanks to the practical M16 cable gland with plug-in function for a clamping area / cable diameter of 4–10 mm
Detection range PIR sensor: max. 10 m at a 180 ° angle, adjustable switch-off delay (5 - 600 s), light sensitivity (5 - 2000 lx) & range (1 - 10 m)
Highlight: the motion detector can be switched on and off, which means that it can be used as a normal outdoor spotlight
Stable, angled mounting bracket for wall mounting or attachment to a tripod with a rotation range of up to 180 °
High quality and shockproof aluminum die-cast housing, transparent and tempered glass, plastic sensor
Energy savings of up to 80 % compared to halogen lamp floodlights

Product: PD2-S-P (92152) Presence Sensor LUXOMAT® PD2-S, Slave with 360 degree field of detection for recessed ceiling. Large energy savings potential. It requires only a Master of ignition of light and ventilation. Possibility of detection of movement in all local segments with slaves. The pulse signal to the Master of detected movement. Movement Detection independent of ambient brightness No setting items on the Slave sensor and præstationsdel in a cabinet Application examples: meeting rooms, class rooms, single offices, garages Mains: 230 V ~ ± 10% Detection range: 360 ° Range (around) m: - sitting Ø 4 00 m - across Ø 10.00 m - head Ø 6.00 m Protection: IP20 / Class II / CE Dimensions: Ø 80 x H 84.5 mm Ambient temperature: -25 ° C to + 50 ° C Cabinet: of UV-resistant polycarbonate high quality Pulse function: Pulse spacing 2 sec. or 9 sec. Slave output Slave device: 230 V. Power consumption:> 0.5W.

Ceiling motion detector for indoor use with a 360° detection areaFor mounting in suspended ceilingsOne channel for light switchingManual switching via push-button possibleEasy parameterising by remote control (optional)Basic functions for cost-effective applicationsReady-to-operate thanks to factory settingsAccessory for surface mounting and flush mounting availableApplication examples:monitoring of large areas, openplan offices, technical rooms, underground car parks.

Motion detector with 280° detection area and anti-creep zoneMechanical range adjustmentDifferent follow-up time depending on direction of movementUninterrupted parallel circuit detection of several detectorsManual switching via push-button possibleAdjustable ball headImmediate operation using factory settingsAdditional functions can be set up using the optional remote control.Socket compatibility with RC-plus (next) and VarioEasy mounting thanks to plug baseWall, ceiling and corner mountingFactory settings 3 min and 20 luxApplication examples:for narrow premises, walkways, gateways

· Can be used for setting motion sensor type 41-100 · Bracket for wall mounting included

The AD600 is a presence detector for energy-saving lighting control. By monitoring sounds from two different areas of frequency and analysing them, “presence" is detected. The lighting is switched on by the inaudible “sounds" with low frequencies which arise when a door opens. The lighting is then kept switched on by higher sound frequencies from footsteps and speech. The main function is automatic activation/deactivation of the lighting in the event of presence/absence. Activation/ deactivation can take place in two separate channels, A and B (lighting groups).

· Antracite· 230 V connection · Detection range 180° · Detection range up to 11 meters (Antracit) · Time delay up to 30 mins. · Setting of lux, time and meters below hidden cover · Facility for ceiling installation · Facility to block detection range

Product: PD4-S-P (92142) Presence detector LUXOMAT® PD4-S, Slave and the range for mounting in fixed ceiling or PL can. Large energy savings potential especially in large spaces and in monitoring of large surfaces. It requires only a Master of ignition of light and ventilation. Possibility of detection of movement in all local segments with slaves pulse signal to the Master of detected movement. Detection of movement independent of the ambient brightness. Application examples: monitoring of large redundant surfaces, for example. parking garages, gyms, warehouses, loading ramps, halls etc. Power supply voltage: 230V ~ ± 10%. Detection range: 360 °. Range (around) m: - sitting Ø 6.40 m - across Ø 24.00 m - head Ø 8.00 m Protection: IP20 / Class II / CE. Dimensions: Ø 97 x H 103 mm. Ambient temperature: -25 ° C to + 50 ° C Housing: UV-resistant polycarbonate high-quality. Pulse function: Pulse spacing 2 sec. or 9 sec. Slave output Slave device: 230 V. Power consumption:> 0.5W.

Product: Ball protection grid BSK (92,199) Ball protection grid to protect the presence detectors PD1, PD2, PD3 and PD4 against vandalism and damage caused by balls. Dimensions: Ø 200 x H 90 mm

Motion detector with 130° detection area and anti-creep zoneMechanical range adjustmentDifferent follow-up time depending on direction of movementUninterrupted parallel circuit detection of several detectorsManual switching via push-button possibleAdjustable ball headImmediate operation using factory settingsAdditional functions can be set up using the optional remote control.Socket compatibility with RC-plus (next) and VarioEasy mounting thanks to plug baseWall, ceiling and corner mountingFactory settings 3 min and 20 luxApplication examples:for narrow premises, walkways, gateways

GRIPO sensor can control when and how long the light should be on. You welcome guests or scare away intruders. The sensor does not use much power as it only switches on when needed. Place the sensor at the front or back door, in the garden, in the garage, on the stairs, in the hallway, in the utility room or wherever it is nice that the light turns on automatically. The user manual is in English. Easy to set up, but be aware that the connection must be made by an authorised electrician.

Rörelsesensor, vit

Product: PD2-S-i (92166) Presence detector LUXOMAT® PD2-S, Slave with 360 degree field of detection for recessed ceiling. Large energy savings potential. It requires only a Master of ignition of light and ventilation. Possibility of detection of movement in all local segments with slaves. The pulse signal to the Master of detected movement. Movement Detection independent of ambient brightness No setting items on the Slave sensor and præstationsdel in a cabinet Application examples: meeting rooms, class rooms, single offices, garages Mains: 230 V ~ ± 10% Detection range: 360 ° Range (around) m: - sitting Ø 4 00 m - across Ø 10.00 m - head Ø 6.00 m Protection: IP20 / Class II / CE Dimensions: Ø 80 x H 84.5 mm Ambient temperature: -25 ° C to + 50 ° C Cabinet: of UV-resistant polycarbonate high quality Pulse function: Pulse spacing 2 sec. or 9 sec. Slave output Slave device: 230 V Power consumption:> 0.5W

GRIPO sensor can control when and how long the light should be on. You welcome guests or scare away intruders. The sensor does not use much power as it only switches on when needed. Place the sensor at the front or back door, in the garden, in the garage, on the stairs, in the hallway, in the utility room or wherever it is nice that the light turns on automatically. The user manual is in English. Easy to set up, but be aware that the connection must be made by an authorised electrician.