Rems - sita 3 - Kvalitet till konkurrenskraftiga priser

Rems Crimping pliers M28 570140

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 629,00 kr (1 303,20 kr)

Leverantör, 3-4 vardagar leveranstid

Rems Crimping pliers Mini V28 578336

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 703,00 kr (1 362,40 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini RN20 578438

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

2 326,00 kr (1 860,80 kr)

Beställningsvara - leveranstid kan ej upplysas

Rems Pipe cutter nano basic pack

Powerful, handy electric tool for cutting pipe and tubing. For trade and industry. For the building site and the workshop.Stainless steel pipes of pressfittingsystems, carbon steel, Ø 12 – 28 mmcopper Ø 10 – 35 mmMultilayer composite pipes Ø 10 – 40 mmREMS Akku-Nano – cutting up to Ø 40 mm. Ultra-light. Fast. Right angled. Chip-free. Without outer burr. Dry.

6 454,00 kr (5 163,20 kr)

Beställningsvara, 3-4 vardagar leveranstid

Rems Pressing pliers up 25

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

2 363,00 kr (1 890,40 kr)

Beställningsvara - leveranstid kan ej upplysas

Rems Crimping pliers Mini V18 578332

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 769,00 kr (1 415,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Pipe support herkules 3B

Height-adjustable material support with ball guide for rotating and stationary pipe and rod material. For crafts and industry. For construction sites and workshops. Pipe Ø (1/8) 1 – 6", Ø (6) 25 – 150 mm. Rod material Ø (6) 25 – 150 mm REMS Herkules – the strong support.

4 725,00 kr (3 780,00 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Battery Ni-MH 12V 2.0Ah 571510

Battery 12 V, 2,0 Ah for many pressingsWith use of charger with impulse-tchnology No memory effect

2 769,00 kr (2 215,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Pipe cutter accu-nano basic pack

Powerful, handy cordles battery tool for cutting pipe and tubing. For trade and industry. For the building site and the workshop.Stainless steel pipes of pressfittingsystems, carbon steel, Ø 12 – 28 mmcopper Ø 10 – 35 mmMultilayer composite pipes Ø 10 – 40 mmREMS Akku-Nano – cutting up to Ø 40 mm. Ultra-light. Fast. Right angled. Chip-free. Without outer burr. Dry.

7 161,00 kr (5 728,80 kr)

Leverantör, 3-4 vardagar leveranstid

Rems Electric pressure test pump E-Push 2

Powerful, electric pressure testing pump for pressure and tightness tests of piping systems and receptacles. Testing and pressure range p 60 bar/6 MPa/870 psi. Pumping capacity 6.5 l/min water, hydrous solutions, emulsions, ph-value of liquids 7-10, temperature of liquids 60°C, viscosity of liquids 1.5 mPa s.REMS E-Push 2 – electric charging and testing. Up to 60 bar. With adjustable pressure limiting. 1300 W. Self sucking.

9 960,00 kr (7 968,00 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Pipe scissors ROS P 42 S

Handy quality tools for clean, fast pipe cuts. For thin-walled pipes also. Sturdy aluminium design. For single-hand operation.Plastic pipes, multi-layer composite tubes Ø 42 mm Ø 158

1 096,00 kr (876,80 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini V35 578604

High performance cropping tongs in forged and specially hardened steel for cutting threaded rods.Steel, stainless steel up to strength class 4.8 (400 N/mm2) M 6 – M 10, UNC 3/8.REMS cropping tongs Mini – cuts threaded rod in just 2 seconds.Made of forged and specially hardened steel.Reversible cropping inserts for double service life.Cropping inserts with high precision thread contour machined on CNC production centres for exact guiding of the threaded rod in the cutting process. Plier parts, cropping inserts and specially machined and hardened cutting edges, made to fit exactly, for cutting without burr.Cutting device in pliers design (Patent EP 1 459 825, Patent US 7,284,330). Very compact design and low weight of the REMS Mini cropping tongs due to special arrangement of the cropping tongs connection (Patent EP 2 347 862).

1 842,00 kr (1 473,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers M22 570130

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 464,00 kr (1 171,20 kr)

Leverantör, 3-4 vardagar leveranstid

Rems Crimping pliers Mini up 32

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

2 243,00 kr (1 794,40 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini U 16

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.

2 119,00 kr (1 695,20 kr)

Leverantör, 3-4 vardagar leveranstid

Rems Battery Nano Li-ion 12V 2.5AH

LiIon PLUS technology. Highly resistant Li-Ion 12V battery with 2.5 Ah capacity for long service life. Powerful and light. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range –10 to +60 °C. No memory effect for maximum battery power.

3 152,00 kr (2 521,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini V22 578334

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 769,00 kr (1 415,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Handle F 4" tube - Tube holder 4"

Power-transmitting pipe holder. For assembly and demolition. Unique pipe holder that 5 times the power transfer – allows easy, fast, perpendicular sawing on site, without the use of a vise. Ideal handling, easy and quick operation, just one handle for clamping and sawing. No freely swinging chain and cumbersome operation, as when using a chain vise. No clamping option, as the swing angle is limited. 400% more sawing power available for a power-saving, super-fast sawing during assembly and demolition, e.g. a 4" steel pipe in just 8 seconds. With the pipe holder installed, for optimal sawing, it is recommended to use a straight hand grip.

3 535,00 kr (2 828,00 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Intermediate Pliers Mini Z8

Adapter tongs Mini Z8for driving REMS pressing rings S & 45° (PR-2B)

2 084,00 kr (1 667,20 kr)

Beställningsvara - leveranstid kan ej upplysas

Rems Crimping pliers Mini M18 578314

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 678,00 kr (1 342,40 kr)

Leverantör, 3-4 vardagar leveranstid

Rems Crimping pliers Mini BMP 3/8" for MaxiPro cooling fittings

High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.

2 361,00 kr (1 888,80 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini G 26

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.

1 973,00 kr (1 578,40 kr)

Leverantör, 3-4 vardagar leveranstid

Rems Push pressure test pump

Hand pressure test pump with manometer, p = 60 bar/6 MPa/870 psi, for pressure and tightness testing of pipe systems and containers up to 60 bar/6 MPa/870 psi. Corrosion-resistant, powder-coated steel container for 12 l volume. 1.5 m high-pressure hose with 12" connection. In carton.

2 566,00 kr (2 052,80 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Mini cobra pipe cleaner 170010

Proven hand unit for quick application to remove pipe blockages in kitchen, bath, toilet.For pipes Ø 20–50 (75) mm. For cables Ø 6, 8, 10 mm.REMS Mini-Cobra – by hand or electric.Indispensable to remove small blockages.

2 413,00 kr (1 930,40 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini U 25

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.

2 350,00 kr (1 880,00 kr)

Leverantör, 3-4 vardagar leveranstid

Måndag-Fredag: (5/6-26 Stängt)	09.00 - 15.00
Lördag, Söndag & danska helgdagar:	Stängt
Lunchstängt:	12.00 - 13.00

Kontakta oss