Rems - Kvalitet till konkurrenskraftiga priser

-8%

Rems Pipe cutter Cu-Inox 3-28mm 113300 R

Robust quality tools for cutting tubes. Particularly suited for cutting stainless steel tubes.Copper tubes, thin-walled stainless steel tubes, thin-walled steel, aluminium, brass tubes Ø 3 – 28 mm Ø 18 – 118Cutting wheel:4327920515REMS RAS Cu-INOX – for places with difficult access.

Before 463,00 kr

425,00 kr (340,00 kr)

I lager, 1-2 vardagars förväntad leveranstid

Rems Press pliers V28

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

2 002,00 kr (1 601,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers V18 570125

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

2 002,00 kr (1 601,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems CamScope HD inspection camera set

Mobile, handy inspection camera for affordable inspection and damage analysis of hard-to-reach places such as cavities, shafts, pipes etc. For battery operation.
Documentation of images and videos on MicroSD card. For battery or mains operation.
Camera head Ø 8mm

REMS CamScope HD – sharp images and videos from cavities, shafts and pipes in HD quality (1920 × 1080 pixels).
MicroSD card holder.

Construction
Super light and handy.
Controller unit with pistol grip and camera cable set, only 0.5 kg. Can be used anywhere, freehand, above head height, even in particularly tight spaces.
Stable, impact-resistant plastic housing with ergonomically designed pistol grip.
The buttons are located directly below the display, making it possible to hold the pistol grip and operate the buttons with one hand.
Buttons for e.g. adjustment of the brightness of the LEDs in the camera head and the display in every 4 steps, mirroring and zooming of the image shown in the display, retrieval and navigation in the menu.
Integrated power LED in the On button for displaying the operating mode.
Li-ion battery 3.7 V with 4.0 Ah for long operating time. Different camera-cable sets HD can be inserted.
Plug-screw connections for replacing camera-cable sets without the use of tools.
Stable case for controller unit with pistol grip, camera-cable set Color 8-1 HD, USB cable and accessories.

Controller unit with TFT-LCD color display
Controller unit with pistol grip with 5" color display with the latest TFT-LCD technology and 480×854 pixels, for the sharpest images and videos.
Possibility of choosing a menu language.
MicroSD card holder.
Images and videos in HD quality can be saved on MicroSD cards for easy documentation of the inspection results. 4x digital zoom. The date and time of the recording can be saved on the image and video if desired.
Instant playback of saved recordings or transfer to other devices per MicroSD card.
USB connection only for direct connection with PC or laptop and for charging the battery.

Battery and mains operation
Li-Ion Technology. Pistol grip controller unit with integrated rechargeable li-ion battery 3.7V, 4.0 Ah. Easy and efficient.
High energy density to approx. 5 hours of continuous operation. During the charging of the battery with the USB cable, the machine can be used via mains operation. No memory effect for maximum battery power.

Interchangeable camera cable set Color
Camera-cable set Color, consisting of color camera Ø 8 mm, with CMOS sensor, with dimmable LEDs with white light for optimal brightness setting and Fixed-Focus function for automatic adjustment of image sharpness, protected against temporary immersion in water ( IP 67).
Camera cable set Color 8-1 HD with 1 m flexible push cable and mirror, hook or magnet for attachment.

3 138,00 kr (2 510,40 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers V22 570135

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

2 002,00 kr (1 601,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers M18 570120

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 712,00 kr (1 369,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Pressing pliers up 25

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

2 476,00 kr (1 980,80 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Flushing/filling unit Solar-Push K

REMS Solar-Push K 60. Electric filling and flushing unit for easy and quick filling, flushing and venting of closed systems. In carton. Transport performance = 36 l/min., container volume 30 l. With centrifugal pump, temperature resistant for constant load = 60°C. Shipping pressure = 5.5 bar/0.55 MPa/80 psi. Condenser motor 230 V, 50 Hz, 860 W. 2 pcs. flexible, transparent woven PVC hoses 1/2" T60, each 3 m long, temperature resistant = 60°C.

10 825,00 kr (8 660,00 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Mini-press ACC Li-ion 14.4V

Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pipe pressing joints Ø 10–40 mm, 3/8 - 1 1/4. REMS pressing tongs Mini. REMS Mini-Press ACC – universal up to Ø 40 mm / 1 1/4.Super light, super small, super handy. With automatic circuit control. Secure crimping in seconds. Automatic locking of pressing tongs. Assortment of REMS pressing tongs Mini for all common pressfitting systems

12 615,00 kr (10 092,00 kr)

Leverantör, 2-3 vardagar leveranstid

Rems set M 42+54 (PR-3S) Z2

REMS pressing rings (PR-3S) with 3 swivellable pressing formers mounted on a jointedring for large dimension complex pressings. Optimum pressing by radially controlledmovement of the pressing formers. Pressing contour M

21 829,00 kr (17 463,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Curvo EL bender Ø15 18 22

Universal, compact electric tool for cold bending of pipes and tubes up to 180°. Can be used anywhere, without vice. For trade and industry. For the building site and the workshop. Hard, half-hard, soft copper tubes, also thin-wall Ø 10–35 mm, Ø 3/8–13/8. Coated soft copper tubes, also thin-wall Ø 10–18 mm. Stainless steel tubes of pressfitting systems Ø 12–28 mm. Coated steel tubes of pressfitting system mapress C-STAHL Ø 12–28 mm. Soft precision steel tubes Ø 10–30 mm. Steel pipes EN 10255 (DIN 2440) Ø 1/4–3/4. Electric conduit DIN EN 50086 Ø 16–32 mm, multi-layer composite tubes Ø 14–40 mm.REMS Curvo – wrinkle-free bending.Universal for many pipes and tubes. Instant use without setting. Fast and creep speed operation for precise bending. Quick change of bending and back formers.Set includes Bending and back formers 15mm - 18mm - 22mm

24 167,00 kr (19 333,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Amigo Set R1/2"-3/4"-1"-1 1/4"

Powerful, easy-to-operate electric tool for threading with unique support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.Pipe threads 18 – 114, 16 – 40 mm Bolt threads 6 – 30 mm, 14 – 1Set includes Die heads R 12 - 34 - 1 - 114REMS Amigo – the smallest, lightest, strongest and fastest up to 114.

10 744,00 kr (8 595,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Pliers M54 570170

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

6 734,00 kr (5 387,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Mini-Press 22V ACC - 578010 R220

Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pipe pressing joints Ø 10–40 mm, 3/8 - 1 1/4. REMS pressing tongs Mini.REMS Mini-Press ACC – universal up to Ø 40 mm / 1 1/4. Super light, super small, super handy. With automatic circuit control. Secure crimping in seconds. Automatic locking of pressing tongs. Assortment of REMS pressing tongs Mini for all common pressfitting systems

16 948,00 kr (13 558,40 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Mini cobra pipe cleaner 170010

Proven hand unit for quick application to remove pipe blockages in kitchen, bath, toilet.For pipes Ø 20–50 (75) mm. For cables Ø 6, 8, 10 mm.REMS Mini-Cobra – by hand or electric.Indispensable to remove small blockages.

2 368,00 kr (1 894,40 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Suction and pressure cleaner Pull-Push

REMS Pull-Push – fast clearance of blockages.Proven, reliable suction and pressure cleaning device for fast clearance of blockages.High pressing force by front, adjustable handle.Optimum adaptation to the cleaning task by 2 sleeves: Short sleeve for wash basins and baths, long sleeve for toilets.

1 879,00 kr (1 503,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Tiger bayonet saw w/bracket

REMS Tiger ANC VE set. Electric pipe bayonet saw with vario electronics (VE) for easy, fast, perpendicular sawing with pipe holder and for freehand sawing up to 6", 250 mm. Machine with spade handle, maintenance-free, water and dust protected oscillation drive with versatile needle bearing drive (ANC) , aggressive orbital stroke, 230 V, 1050 W, safety rocker switch. Universal saw blade holder for 2". 2 REMS special saw blades 2". In a stable steel case.

8 064,00 kr (6 451,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Accu-Press ACC 22V

REMS Akku-Press 22 V ACC Basic-Pack
Electro-hydraulic battery radial press with automatic return and press pressure monitoring for the production of press joints for all common press fitting systems.
Li-Ion 22 V Technology.
Pipe press joints Ø 10 – 108 (110) mm, Ø 3/8 – 4"
"M" press 12 - 54 mm

With automatic return and press pressure monitoring.
Anti-vibration system.
Safe pressing result in a few seconds.
Automatic locking of the press bar.
Battery Li-Ion 21.6 V, 2.5 Ah for approx. 200 presses of Viega Profi press DN 15 per battery charging.

For operation of REMS press bars/press rings and for suitable press bars/press rings of other makes.
Rotatable press bar attachment with automatic lock.
Electro-hydraulic drive with powerful battery motor 21.6 V, 380 W.
Anti-vibration system.
Safety switch.
LED work lamp.
Battery Li-Ion 21.6 V, 2.5 Ah, fast charger Li-Ion 230 V, 50 – 60 Hz, 90 W

27 696,00 kr (22 156,80 kr)

Leverantör, 2-3 vardagar leveranstid