PEX-system - sita 5

HENCO pressure test plug 26 mm for water, heat and electricity installations Max. 16 bar

HENCO VISION 26 mm adapter sleeve for manifolds for water, heating and cooling installations Max. 16 bar

HENCO VISION 20 mm adapter sleeve for manifolds for water, heating and cooling installations Max. 16 bar

HENCO VISION connection part to the manifold, angle 26 mm for water, heating and cooling installations Max. 16 bar

HENCO VISION PVDF transition 15 x 3/4 from distribution pipes for water, heating and cooling installations Max. 16 bar

HENCO VISION gunmetal sleeve adapter 20 x 1/2 to distribution pipes for water, heating and cooling installations Max. 16 bar

HENCO VISION gunmetal nipple adapter 20 x 3/4 to distribution pipes for water, heating and cooling installations Max. 16 bar

Adapter for use with the PPM manifold system.Max. pressure: 10 barMax temperature: 70°CAssembly of adapter and manifold is carried out without the use of tools using a bayonet coupling.

Used for QuickBox in plate walls.Remember to order Ø4 x 60 mm screws to fasten the junction boxes, use 2-4 screws per. junction box.

Used in dry wall to Roth QuickBox, when the installation is extraordinarily deep.

Mounting bracket Uponor Smart Aqua plus M7

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Manifold in gunmetal with push and insert in AISI 316

Used for connection between Pex and pipe, valves etc. with thread

EPDM 120x120 - ø54

Uponor 1057453 rörmokeritillbehör Lödningsringände

Uponor 1008684 rörmokeritillbehör Kranadapter

Brass cap with TEA-surface for 3/4 manifold

For assembly of pipes or fittings.

Uponor 3/4 4X15 mm pipe with fixed socket

HENCO VISION 3 branch distribution pipes for water, heating and electricity installations Max. 16 bar

Transition from 28 mm to pipe thread.

Transition from 28 mm to pipe thread.

Termination box, including Q&E termination elbow in DR-brass, white Q&E ring and mounting screws. For water proof connection with PE-Xa pipes and Uponor conduit in all types of walls, according to NT VVS 129.

Made of polypropylene. For floor penetrations for radiators. Fits empty pipes with dimensions of 25/20. C/C 40 mm. Can be modified with a spacer block.