PEX-system - sita 4

Pettinaroli manifold 4 outlets tea 15 mm

Manifold for water with 4 outlets. Incl. 15 mm fitting for polyethylene pipe with TEA surface.

349,00 kr (279,20 kr)

Leverantör, 2-3 vardagar leveranstid

Roth backplate elbow 15 mm x 1/2"

Backplate elbow is used in e.g. utility room.

192,00 kr (153,60 kr)

Leverantör, 2-3 vardagar leveranstid

Broen Wallofix box long 15 mm

Wallofix wallbox long TT 15 mm

175,00 kr (140,00 kr)

Leverantör, 2-3 vardagar leveranstid

Uponor termination box q&e m7a ppsu 16-rp1/2ft

Termination box, including Q&E PPSU termination elbow,white Q&E ring and mounting screws. For water proof connectionwith PE-Xa pipes and Uponor conduit in all types ofwalls, according to NT VVS 129.

193,00 kr (154,40 kr)

Leverantör, 2-3 vardagar leveranstid

Viega Transition piece PB 16 mm x 1/2" sleeve gunmetal

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

242,00 kr (193,60 kr)

Leverantör, 2-3 vardagar leveranstid

Roth adjustable wall bracket for quickbox 220-400 mm

Used for QuickBox in plate walls.Remember to order Ø4 x 60 mm screws to fasten the junction boxes, use 2-4 screws per. junction box.

208,00 kr (166,40 kr)

Leverantör, 2-3 vardagar leveranstid

Viega Mounting bracket 150/160 mm

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

143,00 kr (114,40 kr)

Leverantör, 2-3 vardagar leveranstid

Pettinaroli Manifold cc50 tea 2 outlets 15/10 bi-502xt

Manifold for water TEA 2 outlets 15/10 mm fittings

262,00 kr (209,60 kr)

Leverantör, 2-3 vardagar leveranstid

Pettinaroli Brass manifold 3/4x1/2 for water- and heatingsystems 3 outlets

Brass manifold with 3 outlets for water- and heatingsystems.

218,00 kr (174,40 kr)

Leverantör, 2-3 vardagar leveranstid

Pettinaroli Brass manifold 3/4x1/2 for water- and heatingsystems 2 outlets

Brass manifold with 2 outlets for water- and heatingsystems.

160,00 kr (128,00 kr)

Leverantör, 2-3 vardagar leveranstid

Uponor q&e manifold adapter male thread ppm 1 g3/4mt

Adapter straight ppm Uponor 1x3/4.

160,00 kr (128,00 kr)

Leverantör, 2-3 vardagar leveranstid

Roth cap for gunmetal manifold

used for Roth EURO-red manifold

158,00 kr (126,40 kr)

Leverantör, 2-3 vardagar leveranstid

Roth female elbow 90° push-fit 22 mm x 3/4"

Transition from 22 mm to pipe thread.

256,00 kr (204,80 kr)

Leverantör, 2-3 vardagar leveranstid

Roth dual-pipe coupling canister 1/2" x 15 mm px

For 2 pipe, in 15 mm

490,00 kr (392,00 kr)

Leverantör, 3-4 vardagar leveranstid

Roth manifold 4 x 15 mm pex euro-red

Roth manifold in gunmetal for pex pipe

544,00 kr (435,20 kr)

Leverantör, 2-3 vardagar leveranstid

Roth mounting kit for drywall

Used for Roth QuickBox in dry wall

78,00 kr (62,40 kr)

Leverantör, 3-4 vardagar leveranstid

Roth manifold 4 outlets gunmetal

Roth manifold with 4 outlets. Used together with Roth connection 401975.8xx

377,00 kr (301,60 kr)

Leverantör, 2-3 vardagar leveranstid

Roth manifold 2 euro-red

Manifold i gunmetal, used with female plastic pipe fitting

219,00 kr (175,20 kr)

Leverantör, 2-3 vardagar leveranstid

Uponor smart aqua plus termination box m7a dr 15-rp1/2ft

Termination box, including Q&E termination elbow in DR-brass,white Q&E ring and mounting screws. For water proofconnection with PE-Xa pipes and Uponor conduit in all typesof walls, according to NT VVS 129.

230,00 kr (184,00 kr)

Leverantör, 2-3 vardagar leveranstid

Viega Distributor pipe 3/4" - 3 gunmetal

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpresse

550,00 kr (440,00 kr)

Leverantör, 2-3 vardagar leveranstid

Unite double wall connection 5 mm x 12 wall connection compr

Unite 15x2,5 wall connection with Cc. 150mm mounted on bracket. Tested for use in wet areas. The Wall Connection fits 15x2,5 PEX and 20/25 corrigated pipes. The brass part is made in DZR brass for drinking water. The plastic part is made in PE.

243,00 kr (194,40 kr)

Leverantör, 2-3 vardagar leveranstid

Roth Plastic pipe adaptor 1/2" mm euro

For Roth gunmetal manifold

98,00 kr (78,40 kr)

Leverantör, 3-4 vardagar leveranstid

Viega Coupling PB 16 mm gunmetal

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

221,00 kr (176,80 kr)

Leverantör, 2-3 vardagar leveranstid

Viega Terminal screw 16 x 1.8 mm gunmetal

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

145,00 kr (116,00 kr)

Leverantör, 2-3 vardagar leveranstid

Roth liner for 15 mm pex stainless steel

Used for Roth pushfittings in gunmetal

65,00 kr (52,00 kr)

Leverantör, 3-4 vardagar leveranstid

Måndag-Fredag:	09.00 - 15.00
Lördag, Söndag & danska helgdagar:	Stängt
Lunchstängt:	12.00 - 13.00

Kontakta oss