Komponenter för switchboxar och skåp - sita 2

Schneider Electric R9P19616 strömbrytare 1P + N

This Resi9 product is a low voltage miniature circuit-breaker (MCB). It is a 1P+N circuit-breaker with 1 protected pole and 6A In rated current and C tripping curve. The Icn rated short-circuit breaking capacity is up to 6000A at 230VAC with operating frequency of 50Hz to 60Hz conforming to EN/IEC 60898-1 standard. This miniature circuit-breaker protects circuit against short-circuit and overload current. This product complies with EN/IEC 60898-1 standard. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. The Resi9 is targeted to residential for individual and collective buildings. This circuit-breaker has an ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables with a cable clamping capacity of 1mm2 to 16mm2. The connection allows flexible or with ferrule copper cables with a cable clamping capacity of 1mm2 to 10mm2. The Ue rated operational voltage is up to 230VAC with operating frequency of 50Hz to 60Hz. The Ui rated insulation voltage is up to 440VAC. The Uimp rated impulse withstand voltage of 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitches is 2. The dimensions are (W) 18mm x (H) 81mm x (D) 70.5mm. The product colour is white (RAL 9003). The product weight is 110g. The pollution degree is 2 conforming to EN/IEC 60898-1 standard. The relative humidity is 95% at 55°C. The heat dissipation is 1.4W. The level of tropicalisation is 2 conforming to IEC 60068-1 standard. The limitation class is 3 conforming to EN/IEC 60898-1 standard. The wire stripping length is 13mm (top or bottom). The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. The IP degree of protection is IP20 and becomes IP40 once in modular enclosure. The operating temperature is from -25°C to +60°C. The storage temperature is from -40°C to +60°C.

MCB 2P 6KA C-13A 2M

Palm switch, 1N/O+1N/C, mushroom black, surface mounting

The Siemens 5SU1336-7FP16 personal protection circuit breaker combines a residual current circuit breaker and a circuit breaker to protect against overcurrent, overheating and electrical faults that can cause personal injury. It has a rated current of 16A with C characteristic, a breaking capacity of 6kA and a residual current of 30mA. The product is 3-pole + N, with a rated voltage of 400V AC and an enclosure class of IP20 for increased safety. It is also equipped with protection against false tripping and an interlock function, ensuring reliable operation under all conditions.

Schneider Electric A9F04713 strömbrytare 3

FI/LS combination switch, 16A, 30mA, C-LS-Char, 3N pole, FI-Char: A

Over current switch, 13A, 1pole+N, type C characteristic

The Siemens 5SU1346-7FP20 personal protection circuit breaker combines a residual current circuit breaker and a circuit breaker to protect against overcurrent, overheating and electrical faults that can cause personal injury. It has a rated current of 20A with C characteristic, a breaking capacity of 6kA and a residual current of 30mA. The product is 3-pole + N, with a rated voltage of 400V AC and an enclosure class of IP20 for increased safety. It is also equipped with protection against false tripping and an interlock function, ensuring reliable operation under all conditions.

Schneider Electric iC60 RCBO strömbrytare 4P

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 1P+N circuit-breaker with 1 protected pole, 16A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 230VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 10kA at 230VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance.

Palm switch, 1N/O+1N/C, mushroom red, surface mounting

Acti9 iID B-SI type fault RCCB provides:- protection in case of a continuous earth fault current on the networkgenerated by:- div controllers and frequency converters,battery chargers and converters used in ex PV photovoltaic applicationsas well as back-u

Schneider Electric Resi9 MCB strömbrytare 3P + N

The ESB20..N installation contactors are used to control single loads up to 20 A and can be operated by AC or DC voltages. These contactors are made for use in household applications as well as in industrial environments.The following benefits are provided: Hum-free operation, low power consumption and integrated overvoltage protection. Various contact combinations and accessories are available.

Schneider Electric Resi9 MCB strömbrytare 3P + N

AF09 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

on-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC

Schneider Electric A9Z21440 strömbrytare 4

C120N - circuit breaker - 4P - 100A - C curve

The Siemens 3-pole circuit breaker 5SY6350-7 offers reliable protection with a breaking capacity of 6kA according to EN 60898. With C characteristics and a rated current of 50A, it is ideal for industrial applications. It is easy to mount on a DIN rail and has an IP20 protection class. The fuse supports both single-phase and three-phase installations and is designed to handle current loads up to 400V AC.

Over current switch, 16A, 3pole+N, type C characteristic

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 2P circuit-breaker with 2 protected poles, 10A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. This double terminal miniature circuit breaker reflects Schneider Electric expertise with more than 40 years developing modular devices for the protection of electrical circuits in all applications. It has a longer service life thanks to its high limitation and fast closing. This product is compliant with both IEC 60898-1 and IEC 60947-2, has IP20B finger proof terminals with double the tightening torque versus the standard and is DIN rail mountable. It offers VisiTripTM for safety during maintenance and VisiSafeTM to reduce intervention time.

Residual current circuit breaker (RCCB) 40A 4p 30mA type A

Siemens 5SL6332-7 övrigt