Danfoss Golvvärme - sita 2

Danfoss FHM-C2 prefabricated floor heating shunt for regulating the flow temperature in water-borne floor heating systems. With Danfoss Icon floor heating control and expansion module, the flow temperature can be regulated electronically according to the heating requirement in the home.

Danfos Link HC master regulator 10. Wireless temperature control – all around the house. Danfoss Link is intelligent and wireless communication technology on the inside and stylish on the outside with its timeless design. For total control of your ind

Required module for those who want to have a wireless systemFeatures Radio module• Required module• Sends and receives wireless signals between room thermostats and Master Controller

Danfoss TWA-A thermal actuator 24V NO. The thermal actuator TWA-A range is used with electrical on/off-controls to activate several types of Danfoss valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the

DEVIpipeheat 10 V3, 16m Self limiting with Danish plug

DEVIpipeheat 10 V3, 25m Self limiting with Danish plug

DEVIpipeheat 10 V3, 10m Self limiting with Danish plug

DEVIpipeheat 10 V3, 6m Self limiting with Danish plug

Danfoss floorheating FHF-BV. End-pieces, brackets and other accessories for the FHF manifold series. Ball valve prepared Danfoss thermometer.

The Danfoss FHM-C1 shunt is used for regulating the floor heeating.

The Danfoss BasicPlus and BasicPlus2 Room Thermostats are designed to be stand alone thermostats directly connected to an 230V actuator. The thermostats are available in versions with dial, display and programmable display.

For those who want highly advanced control options including cooling operation and supply temperature controlFeatures Expansion module • Required module• Sends and receives wireless signals between room thermostats and Master Controller

Danfoss 088H3120 rörmokeritillbehör

Cable for ABNM A5 1 meter, halogen free (0-10V). REMEMBER 406848800 AND 460947976

Danfoss flow thermostat type FH-TC for compact floor heating shunt with self-activating thermostatic control.

DEVIpipeheat 10 V3, 4m Self limiting with Danish plug

Floor Heating Valve for RA 2000 Sensors. The FHV-A self-acting floor heating valve provides temperature control of floor heating circuits using RA 2000 room thermostats. The valve is equipped with pre-setting. The valve is designed to be built into a solid or partition wall, making only the round front cover and sensor visible in the final installation. The valve is suitable for compression fittings and is delivered with built-in air vent.

For those who want to use demand based supply temperature.Features Thermal actuator• Special actuator for demand based supply temperature functionality• IP54, protected against dust and splashing water

For those who want to set the desired temperature, see the current temperature and control the floor surface temperatureFeatures wireless display thermostats• Infrared floor temperature sensor• Temperature range limitation• Wireless 2-way communication• Touchscreen control• Icon-based navigation• Noiseless switching• Battery (2 x 1,5V) powered

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 2 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 5 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 7 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Devi fitting