Danfoss Golvvärme

Danfoss A/S, 082F1071

Danfoss Zigbee Repeater, 230V/wireless. Used as a network amplifier between the Zigbee gateway and wireless devices. Compatible with Danfoss AllyTM, Danfoss IconTM and 3rd party Zigbee 3.0 systems.

Danfoss Icon2™ Main Controller for underfloor heating control. Basic model, 230V, 15 circuits. Installation, adjustment and handover take place easily with the Danfoss Icon2™ Commissioning App.

Danfoss Icon2™ TWA Conversion module for converting 230V actuator output to 24V actuator output.

24V room thermostat for installation 80x80 with replaceable frames and touch display. Can be used with a floor sensor.

Danfoss 088U2122 termostater ZigBee Vit

For those who want to set the desired temperature and see current temperature.Features wireless display thermostats• Temperature range limitation• Wireless 2-way communication• Touchscreen control• Icon-based navigation• Noiseless switching• Battery (2 x 1,5V) powered

Danfoss Icon2 Antenn

Danfoss 088U2120 termostater ZigBee Vit

For those who want to control the system via a smartphone AppFeatures App module • Wi-Fi connection• Android App• Apple App• Change temperatures• Change time schedule

Danfoss TWA-A thermal actuator 230V NC. The thermal actuator TWA-A range is used with electrical on/off-controls to activate several types of Danfoss valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the

Danfoss IconTM Zigbee Module, 24V/wireless. Used to connect the Danfoss Icon master controller (088U1141 or 088U1142) to the Zigbee 3.0 network and can thereby be controlled via the Danfoss Ally gateway or a 3rd party Zigbee 3.0 compatible gateway.

Danfoss Icon Master Controller 24V with 10 channels. Underfloor heating control for the Danfoss Icon series with 10 outputs for thermal actuators. Up to 10 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

Danfoss TWA-A thermal actuator 24 V NC. The thermal actuator TWA-A range is used with electrical on/off-controls to activate several types of Danfoss valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the

24V room thermostat for wall mounting with touch display. Can be used with a floor sensor.

Danfoss TWA-K thermal actuator 24V NC. The thermal actuator TWA-K range is used with electrical on/off-controls to activate Heimeier, MNG and Oventrop valves with M30×1.5 connections. Other valves and floor heating manifolds with M30×1.5 connections may a

End section – End-pieces, brackets and other accessories for the FHF manifold series. End Piece with Automatic Airvent.

24V room thermostat for installation 80x80 with replaceable frames and touch display. Can be used with a floor sensor.

Advanced model, 230V, 15 circuits. The Advanced model allows for floor cooling as well as control of supply temperature etc. Installation, adjustment and handover take place easily with the Danfoss Icon2™ Commissioning App.

Wire sensor, 3 m, NTC 15 kOhm at 25 °C 5-45 °C

Danfoss Icon2™ Main Controller for underfloor heating control. Basic model, 24V, 15 circuits. With pre-installed TWA conversion module and DK adapter with ground. Installation, adjustment and handover take place easily with the Danfoss Icon2™ Commissioning App.

Danfoss 088U2121 termostater ZigBee Vit

Danfoss compression fittings. Couplings, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Manifold CFD.

Danfoss SSM underfloor heating manifold in stainless steel with output for 6 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss FHV-R. The FHV-R self-acting floor heating temperature limiter valve provides temperature control of floor heating circuits using FJVR return temperature limiter. The valve is designed to be built into a solid or partition wall, making only the ro