Fluke – Test- och mätverktyg

fuse 803293 - 11A - 1000V - 20kA - 10,3x38,1

VoltAlertTM technology for non-contact voltage detectionAutoVolt automatic AC/DC voltage selectionLow input impedance: helps prevent false readings due to ghost voltageLarge white LED backlight to work in poorly lit areasTrue RMS for accurate measurements on non-linear loadsMeasures 10 A (20 A overload for 30-seconds)Resistance, continuity, frequency and capacitanceMin/Max/Average with elapsed time to record signal fluctuationsCompact ergonomic design for one-handed operationCompatible with optional magnetic hanger (ToolPakTM) for hands free operationCAT III 600 V safety ratedIncludes:4 mm silicone test lead setHolsterUser manual

Nätverkstestsats

Always on for faster, safer voltage testing2AC is the latest addition to the VoltAlertTM ac non- contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The 2AC tests for energized circuits and defective grounds, whether it’s for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present.Voltage detection from 200 to 1000 V ac, suitable for a wide range of residential, commercial and industrial needs.NEW! Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready.NEW! Innovative ‘Battery Check’ button function ensures battery is in good condition*Category IV – 1000 V overvoltage rated product for best in class user protectionIntegrated clip design, optimized for pocket storagePowered by 2x AAA batteries (included)Fluke ruggedness and reliability

Patented TwistGuardTM extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurementsNew WearGuardTM lead wire wear indication. Each test lead is covered by two layers of silicone insulation, inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacementDouble insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures.Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure.Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugsRatings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tipProbes always show correct category rating for tip being usedEnvironmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)Conforms to EN61010-031

The pocket-sized voltage detectorThe next generation VoltAlertTM AC non-contact voltage testers from Fluke are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.Fluke 1AC-E1-IIRound TipCAT IV 1000 V for added protection200 V to 1000 V AC

fuse440mA(F), 1000V, 10kA,

Designed to Identify Complex Signal Problems FastWhen productivity is on the line and you need to solve problems fast, the Fluke 87V delivers the accuracy and advanced troubleshooting capabilities you need. Designed specifically to handle complex signals, the 87V industrial multimeter, allows you to gain productivity by taking the guesswork out of drive system troubleshooting even in loud, high energy, and high altitude locationsSpecificationsVoltage DCMaximum voltage1000 VAccuracy±(0.05% + 1)Maximum resolution10 VVoltage ACMaximum voltage1000 VAccuracy±(0.7% + 2) True RMSAC bandwidth20 kHz with low pass filter, 3 db @ 1 kHzMaximum resolution0.1 mVCurrent DCMaximum amps10 A (20 A for 30 seconds maximum)Amps accuracy±(0.2% + 2)Maximum resolution0.01 ACurrent ACMaximum amps10 A (20 A for 30 seconds maximum)Amps accuracy±(1.0% + 2) True RMSMaximum resolution0.1 AResistanceMaximum resistance50 MAccuracy±(0.2% + 1)Maximum resolution0.1 CapacitanceMaximum capacitance9,999 Faccuracy±(1% + 2)Maximum resolution0.01 nFFrequencyMaximum frequency200 kHzAccuracy±(0.005% + 1)Maximum resolution0.01 HzDuty cycleMaximum duty cycle99.9%Accuracy±(0.2% per khz + 0.1%)Maximum resolution0.1%Temperature measurement–200.0°C – 1090°C–328.0°F – 1994.0°Fexcluding probe80 BK temperature probe–40.0°C – 260°C–40.0°F – 500°F, 2.2°C or 2% whichever is greaterConductanceMaximum conductance60.00 nSAccuracy±(1.0% + 10)Maximum resolution0.01 nSDiodeRange3 VResolution1 mVAccuracy±(2% + 1)Duty cycle rangeAccuracyWithin ±(0.2% per kHz + 0.1%)Environmental SpecificationsOperating temperature–20°C to + 55°CStorage temperature–40°C to + 60°CHumidity (without condensation)0% – 90% (0°C – 35°C)0% – 70% (35°C – 55°C)Operating Altitude2000 mSafety SpecificationsOvervoltage categoryEN 61010–1 to 1000 V CAT III, 600V CAT IVAgency approvalsUL, CSA, TUV, VDE listedMechanical and General SpecificationsSize201

The Fluke two-pole testers are now more rugged and easier to use than ever before.Fast test results the way you need them, with large, easy-to-use buttons, bright backlights, and clear audible and physical indicators designed for any work situation.Rugged, high-quality construction is built to last. This includes a heavy duty molded case, a thicker cord with wear indicator, sturdy battery case, and well-fitting and durable probe protector.Enhanced ergonomic design feels good in your hand, is easy to use (even with gloves on) and quick, secure probe docking.A complete family of testers with the features, functions, and price/performance to fit your applications and preferences.SpecificationsVoltage AC/DC 6V - 690VContinuity 0 - 400 kFrequency 0 / 40 - 400 HzPhase rotation 100 V - 690 VResistance measurement Up to 1999 Response Time (LED indicator) < 0.5 s200 k input impedance Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V7k input impedance (with load buttons pressed) Current draw 30 mA @ 230 VSafety rating CAT III 690V/CAT IV 600VIP rating P64SpecificationsPower requirement 2-AA batteriesNet weight 280 gSize (length, width, height 26 x 7 x 3.8 cm

Better than a test probe alone – these two inch long rigid back probe pins easily pass between the weather pack seal and wire. A sharp point ensures good contact to the electrical connector, and the pin’s insulation protects it from shorting to other wires.Slides onto test probes measuring 2 mm (0.08 inches)Tested to 60 V DC

The Fluke two-pole testers are now more rugged and easier to use than ever before.Fast test results the way you need them, with large, easy-to-use buttons, bright backlights, and clear audible and physical indicators designed for any work situation.Rugged, high-quality construction is built to last. This includes a heavy duty molded case, a thicker cord with wear indicator, sturdy battery case, and well-fitting and durable probe protector.Enhanced ergonomic design feels good in your hand, is easy to use (even with gloves on) and quick, secure probe docking.A complete family of testers with the features, functions, and price/performance to fit your applications and preferences.SpecificationsT90Voltage AC/DC12V - 690VContinuityFrequencyPhase rotation-Resistance measurement-Response Time (LED indicator)200 k input impedance7k input impedance (with load buttons pressed)-Safety rating CAT II 690V CAT III 600VIP rating IP54 SpecificationsPower requirement 2-AA batteriesNet weight 180 g (T90)Size (length, width, height) 23 x 6.5 x 3.8 cm (T90)

The Fluke 365 is a rugged meter perfect for jobs where access to wires is difficult. The 365’s thin, small jaw is detachable with a flexible lead, which makes gaining access to wires and viewing the display easier than ever.Included accessories:Coated instruction cardSafety information sheetSoft carrying caseTL75 test leadsMagnetic hanging strapTwo AA Alkaline batteries

SpecificationsVoltage DCAccuracy1±(0.09% + 2)Max. resolution0.1 mVMaximum1000 VVoltage ACAccuracy1±(1.0% + 3)Max. resolution0.1 mVMaximum1000 VCurrent DCAccuracy1±(1.0% + 3)Max. resolution0.01 mAMaximum10 ACurrent ACAccuracy1±(1.5% + 3)Max. resolution0.01 mAMaximum10 AResistanceAccuracy1±(0.9% + 1)Max. resolution0.1 Maximum50 MCapacitanceAccuracy1±(1.2% + 2)Max. resolution1 nFMaximum10,000 FFrequencyAccuracy1±(0.1% + 1)Max. resolution0.01 HzMaximum100 kHzTemperatureAccuracy1±(1.0% + 10)Max. resolution0.1°CRange-40°C / 400°CIncludes:80BK Temperature ProbeInstalled 9V batteryTest leadsUsers manual

The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJawTM current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReachTM test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Available in 600V and 1000V models.1000V Voltage, Continuity and Current TesterAll models include:4 mm detachable probesInstruction sheet

Fluke TL76 2mm/4mm Test Lead SetOne pair (red, black) 1.5 meter long silicone test leads with right angle shrouded banana plugLantern tip (removable) for use with European wall sockets (4 mm Ø )Lantern tip can be removed for easy access to terminal blocks (2 mm Ø)Removable, insulated IC caps allow probing on closely spaced leads and compliance with GS38CAT II 1000 V, 10 A ratingCAT III 1000 V, CAT IV 600V only with protective cap

The TL75 Hard PointTM Test Lead Set offers the convenience of a test lead and probe-in-one unit with a variety of connections. One pair (red, black) comfort grip probe with PVC insulated right angel shrouded 4mm (0.16) banana plugs

Rugged, high-quality testers for fast test results the way you need themExperienced professionals trust their job, their reputation and even their personal safety to Fluke electrical test tools. Our family of Two-Pole Voltage Testers are built with state-of-the-art measurement and safety technology, these testers offer everything you expect from Fluke, and a little bit more.Voltage AC/DC 6V - 690VIP rating IP64Power requirement 2-AA batteriesNet weight 280 g Size (length, width, height) 26 x 7 x 3.8 cm

The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems. The Fluke 113 has significant improvements over other digital multimeters available on the market, including Fluke model 7-600. Using the Fluke VCHEKTM LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The Min/Max function lets you record signal fluctuations. The Fluke 113 can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this meter is a must have for every toolbox.Resources:VCHEKTM LoZ low impedance measurement function to simultaneously test for voltage or continuityTrue RMS for accurate AC measurements on non-linear loadsA large backlit display allows for easy visibility in low-lit areasRecord signal fluctuations using the Min/Max functionDiode test for testing general-purpose germanium, silicon, and power diodesIntegral holster with probe holders for easy storageAuto and Manual ranging for added user functionalityMeets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safetyThe optional TPAK magnetic hanger allows the user hands-free flexibility

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminalsHard stainless steel probe tips2 mm diameter tip for electronics workCAT II 1000 V, 10 A rating

Replacement testleads for T5

SpecificationsVoltage DCAccuracy1±(0.09% + 2)Max. resolution0.1 mVMaximum1000 VVoltage ACAccuracy1±(1.0% + 3)Max. resolution0.1 mVMaximum1000 VCurrent DCAccuracy1±(1.0% + 3)Max. resolution0.01 mAMaximum10 ACurrent ACAccuracy1±(1.5% + 3)Max. resolution0.01 mAMaximum10 AResistanceAccuracy1±(0.9% + 1)Max. resolution0.1 Maximum50 MCapacitanceAccuracy1±(1.2% + 2)Max. resolution1 nFMaximum10,000 FFrequencyAccuracy1±(0.1% + 1)Max. resolution0.01 HzMaximum100 kHzIncludes:Installed 9V batteryTest leadsUsers manual

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminalsHard stainless steel probe tipsInsulated Probe Tip (Designed To Meet GS38 Specs for United Kingdom)CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed

Patented TwistGuardTM extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurementsNew WearGuardTM lead wire wear indication. Each test lead is covered by two layers of silicone insulation, inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacementDouble insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures.Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure.Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugsRatings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tipProbes always show correct category rating for tip being usedEnvironmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)Conforms to EN61010-031

Adjustable tip length, allowing increased safety and precision Compatible with the TL22x series, TL238 and TL27 test leads Conforms to EN61010-031 CAT II 1000 V, CAT III 1000 V, CAT IV 600, 10 A rating, UL Listing One-year warranty Patented TwistGuardTM extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2 Probes always show correct category rating for tip being used Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft) Conforms to EN61010-031 One-year warranty Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2 Exposed probe tip length: 19 mm to 4 mm (0.75 inch to 0.16 inch) Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft) TL175 and TL175E also available. TL175E includes removable 4 mm lantern tips that thread onto the lead tip.Conforms to EN61010-031

Fluke T5-H5-1AC II KitThis kit includes:Fluke T5-1000Fluke 1AC IIH5Kits ComponentsH5Electrical Tester Holster (Fluke T3/T5)Fluke 1AC IIVoltAlert Voltage DetectorVoltbeatTM technology and continuous self-test so you always know it's workingUpon detection of voltage, tip glows and beeper soundsCAT IV 1000 V for added protectionExpanded range: 90 V to 1000 V acFluke T5-10001000V Voltage, Continuity and Current TesterAll models include:4 mm detachable probes