Elpress - sita 4

Through connector SC95R95S, screw material: brass, for lowest friction. Partition to prevent fluid passing through. Voltage up to 36 kV. Meets the requirements of IEC-EN 61238-1:2003.

Aluminium terminal with cobberpalm AKK150-10For 150mm2 stranded (class 2) and 185mm2 solid (class 1) Al-conductor.Palm M10.Prerounding of the conductor is needed. Matrix/punchno.: 16MR/16DR.The terminal must be indentcrimped twice thereafter.Matrix/punchno.: 25M/25D.Recommended tool: V1300 system, V250 system

Cobber tube terminal KRF50-6Material: Cu 99,95%, tin plated.For 50mm2 stranded (class 2) and flexible (class 5+6) Cu-conductors acc. IEC60228. Palm M6.With inspection hole.Recommended tool: PVL350, V600, V1300, V250.Die no. 14,5.

Cobber tube connector KS10Material: Cu 99.95%, tin plated Cu/SnFor 10mm2 stranded (class 2) and multi-stranded (class 5) acc. IEC 60228With inspection hole and interior cable stopRecommended tool: PVL130P, PVL130S, ES2258, T3165A1, GWB4099C, GWB4099, PVL350, V600, V611, PVX611, V1300, V1300C2, V1311-A, V1311C2-A, PVX1300, DV1300, DV1300C2Die no.: 8

Cobber tube terminal KRT50-8Material: Cu 99.95%, tin plated Cu/SnFor 50mm2 stranded (class 2) acc. IEC 60228With inspection holePalm M8Recommended tool: TH10120T, TH0650T, T3165C, PVL350, V600, V611, PVX611, V1300, V1300C2, V1311-A, V1311C2-A, PVX1300, PVX1300C2, DV1300, DV1300C2, V250, DV250Die no.: 14

DIN 46235 Sector-shaped Bi-metallic cable lug AKK240-12DIN-PRMaterial: Al DIN 40501 / E-Cu DIN 40500For 240mm2 stranded (class 2) and 300mm2 solid (class 1) Al-conductors acc. IEC 60228Palm M12KZ-no.: 34

Crimping tool for crimping end terminals 0.25-2.5mm2The tool does not have a ratchet function

Cobber tube connector KST16Material: Cu 99.95%, tin plated Cu/SnFor 16mm2 stranded (class 2) acc. IEC 60228With inspection hole and interior cable stopRecommended tool: TH10120T, TH0650T, PVL350, V600, V611, PVX611, V1300, V1300C2, V1311-A, V1311C2-A, PVX1300, PVX1300C2, DV1300, DV1300C2Die no.: 8,5

Elpress hanging assortment boxMade of plastic5 compartments400 pre-insulated end sleeves 0.5 - 2.5 mm2 type ET, colour code W

Aluminium terminal with cobberpalm AKK50-10For 50mm2 stranded (class 2) and 70mm2 solid (class 1) Al-conductor.Palm M10.Prerounding of the conductor is needed. Matrix/punchno.: 9MR/9DR.The terminal must be indentcrimped twice thereafter.Matrix/punchno.: 20M/20D.Recommended tool: V1300 system, V250 system

Tested and certified mechanical crimping tool for indent crimping Cu terminals 0.75-6mm2Locking function which only releases once crimping is completeClearly marked crimping positionsUnique design that makes the tool thin and easy to handleCan be calibrated if requiredWithstands at least 50,000 crimps

Tested and certified mechanical Miniforce hand tool for crimping end terminals 10-25mm2Locking function which only releases once crimping is completeClearly marked crimping positionsErgonomic handle suitable for all usersSupplied with certificate for basic quality monitoringCan be calibrated if requiredWithstands at least 80,000 crimps

DIN 46235 Aluminium connector AS25DINMaterial: Al DIN 40501For 25mm2 stranded (class 2) and 35mm2 solid (class 1) Al-conductor acc. IEC 60228KZ-no.: 12

DIN 46235 Cobber connector KS50DIN-NMaterial: E-Cu DIN 40500, uncoatedFor 50mm2 stranded (class 2) Cu-conductors acc. IEC 60228KZ-no.: 14

DIN 46235 Bi-metallic cable lug AKK50-10DINMaterial: Al DIN 40501 / E-Cu DIN 40500For 50mm2 stranded (class 2) and 70mm2 solid (class 1) Al-conductors acc. IEC 60228Palm M10KZ-no.: 16

Cu-tube terminal w. narrow palm krfs185-12, 185mm2 m12

Cobber tube terminal with narrow palm KRFS120-10Material: Cu 99,95%, tin plated.For 120mm2 stranded (class 2) and flexible (class 5+6) Cu-conductors acc. IEC60228.Palm M10.With inspection hole.Recommended tool: V600, V1300, V250.Die no. 22.

Cobber tube terminal with narrow palm KRFS70-8Material: Cu 99,95%, tin plated.For 70mm2 stranded (class 2) and flexible (class 5+6) Cu-conductors acc. IEC60228.Palm M8.With inspection hole.Recommended tool: PVL350, V600, V1300, V250.Die no. 17.

Screw terminal SL70R70S-10-12, screw material: brass, for lowest friction. Voltage up to 36 kV. Meets the requirements of IEC-EN 61238-1:2003. The terminal is bimetallic type to provide best possible connection to bus bars, apparatus terminals, etc.

Cobber tube terminal KRT35-12Material: Cu 99.95%, tin plated Cu/SnFor 35mm2 stranded (class 2) acc. IEC 60228With inspection holePalm M12Recommended tool: TH10120T, TH0650T, T3165C, PVL350, V600, V611, PVX611, V1300, V1300C2, V1311-A, V1311C2-A, PVX1300, PVX1300C2, DV1300, DV1300C2, V250, DV250Die no.: 12

Cobber tube terminal KRT10-10Material: Cu 99.95%, tin plated Cu/SnFor 10mm2 stranded (class 2) acc. IEC 60228With inspection holePalm M10Recommended tool: TH10120T, TH0650T, T3165C, T2288, PVL350, V600, V611, PVX611, V1300, V1300C2, V1311-A, V1311C2-A, PVX1300, PVX1300C2, DV1300, DV1300C2, V250, DV250Die no.: 7

Cobber tube terminal KRF150-10Material: Cu 99,95%, tin plated.For 150mm2 stranded (class 2) and flexible (class 5+6) Cu-conductors acc. IEC60228.Palm M10.With inspection hole.Recommended tool: V600, V1300, V250.Die no. 25.

Cobber tube terminal KRF16-10Material: Cu 99,95%, tin plated.For 16mm2 stranded (class 2) and flexible (class 5+6) Cu-conductors acc. IEC60228. Palm M10.With inspection hole.Recommended tool: PVL350, V600, V1300, V250.Die no. 9.

Cobber tube terminal KR10-8Material: Cu 99,95%, tin plated.For 10mm2 stranded (class 2) and flexible (class 5) Cu-conductors acc. IEC60228. Palm M8.With inspection hole.Recommended tool: GWB4099, ES2258, PVL350, V600, V1300.Die no. 8.

Aluminium terminal with cobberpalm AKK95-10For 95mm2 stranded (class 2) and 120mm2 solid (class 1) Al-conductor.Palm M10.Prerounding of the conductor is needed. Matrix/punchno.: 13MR/13DR.The terminal must be indentcrimped twice thereafter.Matrix/punchno.: 25M/25D.Recommended tool: V1300 system, V250 system