Elpress - sita 2

DIN 46235 Cobber connector KS10DIN-NMaterial: E-Cu DIN 40500, uncoatedFor 10mm2 stranded (class 2) Cu-conductors acc. IEC 60228KZ-no.: 6

Cobber tube terminal with narrow palm KRFS240A-10Material: Cu 99,95%, tin plated.For 240mm2 stranded (class 2) and flexible (class 5+6) Cu-conductors acc. IEC60228.Palm M10.With inspection hole.Recommended tool: V1300, V250.Die no. 30.

Through connector SC50R50S, screw material: brass, for lowest friction. Partition to prevent fluid passing through. Voltage up to 36 kV. Meets the requirements of IEC-EN 61238-1:2003.

Cobber tube terminal KRT70-10Material: Cu 99.95%, tin plated Cu/SnFor 70mm2 stranded (class 2) acc. IEC 60228With inspection holePalm M10Recommended tool: TH10120T, T3165C, PVL350, V600, V611, PVX611, V1300, V1300C2, V1311-A, V1311C2-A, PVX1300, PVX1300C2, DV1300, DV1300C2, V250, DV250Die no.: 16

Cobber tube terminal KRT35-8Material: Cu 99.95%, tin plated Cu/SnFor 35mm2 stranded (class 2) acc. IEC 60228With inspection holePalm M8Recommended tool: TH10120T, TH0650T, T3165C, PVL350, V600, V611, PVX611, V1300, V1300C2, V1311-A, V1311C2-A, PVX1300, PVX1300C2, DV1300, DV1300C2, V250, DV250Die no.: 12

Cobber tube terminal KRF50-10Material: Cu 99,95%, tin plated.For 50mm2 stranded (class 2) and flexible (class 5+6) Cu-conductors acc. IEC60228. Palm M10.With inspection hole.Recommended tool: PVL350, V600, V1300, V250.Die no. 14,5.

Aluminium terminal with cobberpalm AKK95-8For 95mm2 stranded (class 2) and 120mm2 solid (class 1) Al-conductor.Palm M8.Prerounding of the conductor is needed. Matrix/punchno.: 13MR/13DR.The terminal must be indentcrimped twice thereafter.Matrix/punchno.: 25M/25D.Recommended tool: V1300 system, V250 system

Cobber tube connector KSF50Material: Cu 99.95%, tin plated Cu/SnFor 50mm2 stranded (class 2) and multi-stranded (class 5+6) acc. IEC 60228With inspection hole and interior cable stopRecommended tool: T3165A1, PVL350, V600, V611, PVX611, V1300, V1300C2, V1311-A, V1311C2-A, PVX1300, PVX1300C2, DV1300, DV1300C2, V250, DV250Die no.: 14,5

Cobber tube connector KSF70Material: Cu 99.95%, tin plated Cu/SnFor 70mm2 stranded (class 2) and multi-stranded (class 5+6) acc. IEC 60228With inspection hole and interior cable stopRecommended tool: T3165A1, PVL350, V600, V611, PVX611, V1300, V1300C2, V1311-A, V1311C2-A, PVX1300, PVX1300C2, DV1300, DV1300C2, V250, DV250Die no.: 17

Copper tube cable lug KRF50-8 Material: Cu 99.95%, tinned. For 50mm2 stranded (class 2) and multi-stranded (class 5+6) Cu conductors according to IEC60228. Bolt size M8. With inspection hole. Recommended tools: PVL350, V600, V1300, V250. 

Tool for stripping the outer layer of signal, telephone, audio, instrument, data cables and similarInsulation stripping tool for 2.5-11 mm diameter cable, up to 1 mm thick outer layersPrecise fine-adjustment is performed with a nine-position setting wheelFlexible: strips or removes the outer layer on most multi conductors and optical cables up to 11 mm in diameter

Aluminium terminal with cobberpalm AKK150-12For 150mm2 stranded (class 2) and 185mm2 solid (class 1) Al-conductor.Palm M12.Prerounding of the conductor is needed. Matrix/punchno.: 16MR/16DR.The terminal must be indentcrimped twice thereafter.Matrix/punchno.: 25M/25D.Recommended tool: V1300 system, V250 system

Cobber tube terminal KRF70-12Material: Cu 99,95%, tin plated.For 70mm2 stranded (class 2) and flexible (class 5+6) Cu-conductors acc. IEC60228. Palm M12.With inspection hole.Recommended tool: PVL350, V600, V1300, V250.Die no. 17.

Stripping and cutting tool with straight blades for PVC insulation, 0.02-10 mm2Cutting capacity: on multi-wire conductors 10 mm2 and single-wire conductors 1.5 mm2Easy to change the stripping cassetteFine-adjustment allows stripping of thin insulation without conductor damageErgonomic handlesInterchangeable stripping cassettes and cutting knivesTested over 150,000 cycles

DIN 46235 Cobber connector KS16DIN-NMaterial: E-Cu DIN 40500, uncoatedFor 16mm2 stranded (class 2) Cu-conductors acc. IEC 60228KZ-no.: 8

Cobber tube terminal KRT50-10Material: Cu 99.95%, tin plated Cu/SnFor 50mm2 stranded (class 2) acc. IEC 60228With inspection holePalm M10Recommended tool: TH10120T, TH0650T, T3165C, PVL350, V600, V611, PVX611, V1300, V1300C2, V1311-A, V1311C2-A, PVX1300, PVX1300C2, DV1300, DV1300C2, V250, DV250Die no.: 14

Cobber tube terminal KRT10-5Material: Cu 99.95%, tin plated Cu/SnFor 10mm2 stranded (class 2) acc. IEC 60228With inspection holePalm M5Recommended tool: TH10120T, TH0650T, T3165C, T2288, PVL350, V600, V611, PVX611, V1300, V1300C2, V1311-A, V1311C2-A, PVX1300, PVX1300C2, DV1300, DV1300C2, V250, DV250Die no.: 7

Cobber tube terminal KRF300A-12Material: Cu 99,95%, tin plated.For 300mm2 stranded (class 2) and flexible (class 5+6) Cu-conductors acc. IEC60228.Palm M12.With inspection hole.Recommended tool: V1300, V250.Die no. 32.

Cobber tube terminal KRF150-12Material: Cu 99,95%, tin plated.For 150mm2 stranded (class 2) and flexible (class 5+6) Cu-conductors acc. IEC60228.Palm M12.With inspection hole.Recommended tool: V600, V1300, V250.Die no. 25.

Cobber tube terminal KRF35-10Material: Cu 99,95%, tin plated.For 35mm2 stranded (class 2) and flexible (class 5+6) Cu-conductors acc. IEC60228. Palm M10.With inspection hole.Recommended tool: PVL350, V600, V1300, V250.Die no. 13.

Elpress assortment box designed for hobby useBox made of polypropylene, insert made of polystyrene11 compartments147 pre-insulated 0.5 - 6 mm2 terminals2 connection blocksCrimping tool T50, which crimps, cuts and strips up to and including 6 mm2 and cuts M2.5-M5 screws

Cobber tube terminal KRT50-12Material: Cu 99.95%, tin plated Cu/SnFor 50mm2 stranded (class 2) acc. IEC 60228With inspection holePalm M12Recommended tool: TH10120T, TH0650T, T3165C, PVL350, V600, V611, PVX611, V1300, V1300C2, V1311-A, V1311C2-A, PVX1300, PVX1300C2, DV1300, DV1300C2, V250, DV250Die no.: 14

Cu braching sleeve for Cu-conductors area min-max 25-120 mm2Total area min-max 140-190 mm2For stranded (class 2) Cu-conductors (acc. IEC 60228)Branching sleeve for splicing and branching earth lines as well as lightning control installationsMaterial: Cu 99.95%, tin plated Cu/SnUnique patented solutionPossible to front feed all branchesDie no.: BC13Recommended tool: V1300, V250Replaces Elpress C-sleeves: C13, C13-13, C13-11, C15-11, C15-9 and C15-8

Cobber tube terminal KRT70-8Material: Cu 99.95%, tin plated Cu/SnFor 70mm2 stranded (class 2) acc. IEC 60228With inspection holePalm M8Recommended tool: TH10120T, T3165C, PVL350, V600, V611, PVX611, V1300, V1300C2, V1311-A, V1311C2-A, PVX1300, PVX1300C2, DV1300, DV1300C2, V250, DV250Die no.: 16

Cobber tube terminal KRF16-12Material: Cu 99,95%, tin plated.For 16mm2 stranded (class 2) and flexible (class 5+6) Cu-conductors acc. IEC60228. Palm M12.With inspection hole.Recommended tool: PVL350, V600, V1300, V250.Die no. 9.