DJI Drönare - sita 4

Save yourself time and money by packing this set of four Propellers for Avata 2 from DJI into your gear bag. A day of shooting doesn't have to end because of a broken propeller. With an optional screwdriver, you have everything you need here to replace all of the propellers on the DJI Avata 2. Included in the set are two clockwise propellers, two counterclockwise propellers, and the eight screws needed to attach them to the Avata 2's arms.

In the Box:

DJI Propellers for Avata 2 (Set of 4)
2 x Clockwise Propeller
2 x Counterclockwise Propeller
8 x M2 x 8.7mm Screw

LiDAR avståndsmätare, för DJI Ronin 4D

Högtalare

Flygplan, Bluetooth, Wi-Fi

Propellrar, för Mavic 3 Enterprise

DJI Video Receiver
The DJI Video Receiver is compatible with the DJI Video Transmitter and is ideal for use on film sets. If you use it in conjunction with a film camera such as ARRI or RED, you can conveniently transmit metadata and output video signals with a fractional number of frames per second. The device supports the O3 Pro system, allowing for 1080p/60FPS image transmission up to 4 km. In addition, you can connect an unlimited number of receivers to your transmitter (in Broadcast mode). DJI Video Receiver is also compatible with DJI Master Wheels. Note: DJI Video Transmitter is required to use the DJI Video Receiver.

Almost Unlimited Possibilities
The receiver supports metadata transmission via SDI, which means you can conveniently transmit file names, time codes, camera settings to monitors and QTAKE. The DJI Video Receiver also allows for real-time voice calls (one-on-one), facilitating communication between the operator and director. The device also offers 2 modes of operation. Broadcast mode allows you to connect an unlimited number of receivers to your transmitter, allowing multiple teams to efficiently monitor work on the film set. Control mode, on the other hand, is suitable for remote control of Ronin 2, DJI RS 3 Pro, and camera focus.

In the box
DJI Video Receiver
NP-F battery adapter
WB37 battery adapter
Ronin x2 video transmission antenna
USB-C cable
SDI cable
DC power cable to P-TAP
Mounting kit

DJI O4 Air Unit Pro överföringsmodul säkerställer ultralåg latens och högkvalitativ videotransmission med stöd för upp till 15 km räckvidd tack vare sin dubbla antenndesign. Den levererar 1080p/100fps livevy, 15 ms latens och en bitrate på 60 Mbps för smidig och responsiv styrning. Lätt och kompakt, perfekt för FPV-piloter som söker pålitlig prestanda.

Del 94 2312A motor, för Phantom 3 Standard

Lightning-kabel, USB-C hane till Lightning hane, för DJI Mavic Air 2

DJI Ronin 2 Universal Tripod Adapter Stativadapter Svart, Grå 1 styck

The DJI Ronin 2 C-Stand Bracket is designed to mount onto C-stands with a 5/8" baby pin, allowing you to securely attach the DJI Ronin 2 gimbal.

DJI's Remote Controller for Ronin is a dedicated 2.4 GHz handheld transmitter, pre-configured for seamless Ronin gimbal operation. It allows one operator to carry the gimbal while another remotely controls pan, tilt, and roll for more precise camera movements than a single operator could achieve alone.

This remote is specifically designed for use with the Ronin and is not compatible with the Ronin-M. Ensure the remote control is fully charged before use — it will automatically power off if the battery voltage drops too low. The internal battery charges via the included Micro-USB cable, and using an incorrect cable may cause damage. Always turn off the remote before charging; the power LED will glow solid green once the battery is fully charged.

For safe operation, the antenna should remain at least 7.9 inches away from any person while in use.

The controller features an internal battery with USB charging, a power indicator light, LEDs to show remaining battery life, a carry handle, and a neck strap attachment point. It’s also configurable and updatable using DJI's RC Assistant software.

By default, the controls include a right 3-position switch for selecting modes and a left 3-position switch to choose functions like Fast, Normal, or Slow. The right joystick controls pan with horizontal movements and tilt with vertical ones, while the left joystick manages roll horizontally. The left dial is reserved for future use.

Kit med expansionsbas, för DJI RS 2

The Vibration Absorbing Bracket for Phantom 3 Professional / Advanced from DJI is the top portion of the mounting assembly used to attach the gimbal to the main airframe. Part of the vibration reduction system, it features four spots to which the vibration dampers (available separately) attach. It will work with the Phantom 3 Professional and Advanced. Installation screws are included.

Remote Controller Monitor Hood, för Inspire 1, 1 Professional; Phantom 3 Advanced, 3 Professional, 4

X-port 3-axel Gimbal, för Matrice V2

DJI Neo's tvåvägsladdningshub kan ladda tre batterier samtidigt, vilket ökar både laddningshastigheten och effektiviteten.

Fjärrkontroll för drönare, display, LCD, 5.5", RF, för Air 2S; Mavic 3, 3 Classic, 3 Pro; Mini 3

INCREASED EFFICIENCY
The DJI Inspire 3 Foldable Quick-Release Propellers have been put under precise dynamic balancing tests to increase aerodynamic efficiency and output less noise.

Whether you want to safely transport your drone to a location or just have it on hand if the mood strikes, the DJI Drone Sling Bag is a great way to keep your gear protected while you're on the go. With a zippered lid opening, you can easily access the contents of the bag while carrying it over your shoulder. Inside are three padded compartments designed for compact drones and accessories, such as the Avata 2. In fact, it can hold the Avata 2, Goggles 3, RC Motion 3 or FPV Remote Controller 3, three flight batteries, a two-way charging hub, and more.

• Additional Features
• Soft-shell exterior
• Mesh pouch inside the lid
• Exterior side pouch
• Adjustable shoulder strap

Spara tid vid redigering genom att hantera din exponering i kameran med ljusreduceringen av detta ND-filterset för Avata 2 från DJI. Med ett ND8-, ND16- och ND32-filter kan du minska mängden ljus som kommer in i Avata 2:s kardan med 3-5 steg, kontrollera exponeringen och förbättra både ljusstyrkan och kontrasten.

I lådan:
DJI ND-filterset för Avata 2 (3-pack)

Snabbfrisättande hopfällbara propellrar (paket om 2), för Spark

Monteringsplatta för motvikt, för DJI Ronin M, Ronin MX

DJI WB37 charging hub (USB-C)
The hub allows you to charge up to 2 batteries simultaneously. It supports 65W PD fast charging, and charging time depends on the voltage of the selected charger (not included).

Propellerskydd