Walraven Brickor, busskärror och fästen

MULTI-PURPOSE CLIP FOR FIXING OF PIPES, CABLES CONDUIT ETC. 1.200 N (CA. 120 KG) IN STATIC LOADTO HAMMER ON A STEEL BEAM OR BY HAND. ALSO SUITABLE FOR OUTDOOR APPLICATIONSWITH HOLE TO RECEIVE STEEL CABLE, S-HOOK, CABLE TIE, THREADED ROD (M6 OR M8), AND CAN BE COMBINED WITH BIS STARQUICK PLAST CLIP Ø 10-65MM

BIS Strut Connector 4+4/90 BUP 154x154

BIS STRUT ACCESSORIES - SCREWS BOLTS WASHERS HEXAGON NUTS. CAN BE COMBINED WITH ALL STRUT CANTILEVER AMRS OR RAILS 41x41 OR 41x21M8 SLIDE NUT WITH 13MM SPRING

BIS STRUT ACCESSORIES - STUD CONNECTORS THREADED RODS FIXING TO RAIL STUD BOLTS ADAPTERS ETC:ACCORDING TO DIN 976-1M8 AND ABOVE TESTED FOR FIRE SAFETY.

BIS STRUT ACCESSORIES - STUD CONNECTORS THREADED RODS FIXING TO RAIL STUD BOLTS ADAPTERS ETC:ACCORDING TO DIN 976-1M8 AND ABOVE TESTED FOR FIRE SAFETY.

BIS STRUT ACCESSORIES - STUD CONNECTORS THREADED RODS FIXING TO RAIL STUD BOLTS ADAPTERS ETC:ACCORDING TO DIN 976-1M8 AND ABOVE TESTED FOR FIRE SAFETY.

RapidStrut preassembled slide nut, washer and BIS RapidStrut spring. Fits all Strut rails and cantilever arms. Static vertical load 5,300 Newton. Surface treatment with test according to ISO 9227. A part of the BIS UltraProtect 1000 system which is up to 10 times stronger compared to zinc plated products. Suitable for field and outdoor applications such as slaughterhouses, dairies, and industrial environments with high humidity.

BIS Strut Slide Nut BUP PP tabs M6 (BUP1000)

BIS Clamp HD500 BUP M10/12 108-116mm

FOR A SOLID FIXING TO STEEL CONSTRUCTIONS WITHOUT WELDING OR DRILLINGFOR BEAMS UP TO 23MMACCORDING TO VdS-REGULATION AN ADDITIONAL SAFETY STRAP SHOULD BE USED WHEN SUPPORTING PIPES ABOVE DN65

BIS FIXING TO CEILING BEAMS. TWIST ON ASSEMBLYFOR CEILING BEAMS OF 25MMWITH 7MM HOLE FOR FIXING OF S-HOOK ETC.

FIXING TO RAILS, WALL PLATES, CLAMPS, ETC.ACCORDING TO DIN 976-1

FIXING TO RAILS, WALL PLATES, CLAMPS, ETC.ACCORDING TO DIN 976-1

BIS Strut Connector 2+2/90 BUP 105x105mm

Maxx 100 Bolt Set td M12x130mm

BIS FIXING UNDER FLANGES WITHOUT WELDING OR DRILLINGFOR BEAMS OF 4-7MMFOR CABLES OF 19-24MM

BIS STRUT ACCESSORIES - SCREWS BOLTS WASHERS HEXAGON NUTS. CAN BE COMBINED WITH ALL STRUT CANTILEVER AMRS OR RAILS 41x41 OR 41x21M10 SLIDE NUT WITHOUT SPRING

MULTI-PURPOSE CLIP FOR FIXING OF PIPES, CABLES CONDUIT ETC. 1.200 N (CA. 120 KG) IN STATIC LOADTO HAMMER ON A STEEL BEAM OR BY HAND. ALSO SUITABLE FOR OUTDOOR APPLICATIONSWITH HOLE TO RECEIVE STEEL CABLE, S-HOOK, CABLE TIE, THREADED ROD (M6 OR M8), AND CAN BE COMBINED WITH BIS STARQUICK PLAST CLIP Ø 10-65MM

BIS RapidStrut Hammerfix G2 BUP M8x40mm

HDG RECTANGULAR CONNECTOR WITH 3 Ø 13MM FIXING HOLES. LENGDHT 124MM WIDTH 40MM.BIS RAPIDSTRUT® ACCESSORIES - FOR FIXING RAIL & CANTILEVER ARMS

BIS FIXING UNDER FLANGES WITHOUT WELDING OR DRILLINGFOR BEAMS OF 8-12MMFOR CABLES OF 15-18MM

BIS STRUT ACCESSORIES - SCREWS BOLTS WASHERS HEXAGON NUTS. CAN BE COMBINED WITH ALL STRUT CANTILEVER AMRS OR RAILS 41x41 OR 41x21M6 SLIDE NUT WITHOUT SPRING

STRUT BEAM CLAMP FOR SOLID FIXING ON BIS STRUT FIXING RAILS AND CANTILEVER ARMS 41X41 & 41X21MM.THE CLAMP IS EASY TO ADJUST AND FITS ALL H, I & T-BEAMS. NO DRILLING OR WELDING NECESSARY. ALWAYS USE 2 BEAM CLAMPS PR. FIXING.LENGTH 90MM. HOT DIP GALVANIZED STEEL 1.0332

ONE-PART CLAMP. CLAMP CLOSED BY APPLYING PRESSURE TO THE PIPEDUE TO PATENTED PROFILE IT IS POSSIBLE TO TACK SEVERAL CLAMPS TO EACH OTHERRESISTANT TO UV, AGENING, OIL AND PETROLNO CORROSION, RECYCLABLE, HALOGEN FREETEMPERATURE RESISTANCE FROM APPROX. -40 °C TO APPROX. +90 °C (CONSTANT), SHORT TO APPROX. +130 °C

BIS Clamp HD500 BUP M10/12 159-169mm