B.E.G. - sita 2

Product: PD4N-1C-P (92144) Motion detector LUXOMAT® PD4-1C for attachment to the wall Mounting to ceiling, PL can. A channel for ignition of light. Thick relay for ignition of lamps with high consumption. In particular, an optical system for detecting the slightest movements. Series production impulse function. Application examples: monitoring of large surfaces such. parking garages, gyms, warehouses, loading ramps, halls etc. Power supply voltage: 230V ~ ± 10% Detection range: 360 ° Range (around) m: - across Ø 24.00 m - head Ø 8.00 m Protection class: IP 44 / Class II / CE Dimensions: Ø 109 x H 65 mm Ambient temperature: -25 ° C to + 50 ° C Housing: UV-resistant polycarbonate high quality remote controllable: IR PD3N, IR-PD-Mini Channel 1 (light control) Max Load: 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5. Time settings: 30 sec. - 30 min. or pulsed. Brightness Value: 10-2000 Lux. Power consumption:> 0.5W

Product: Ball protection grid BSK (92,199) Ball protection grid to protect the presence detectors PD1, PD2, PD3 and PD4 against vandalism and damage caused by balls. Dimensions: Ø 200 x H 90 mm

Product: Socket IP54 for PD2-P (92161) With this backing, the IP class of the presence detector PD2 und PD4 (version for mounting on fixed ceiling) increased from IP20 to IP54. Dimensions in mm: Approximately Ø 100 x H 15 Material of UV-resistant polycarbonate high quality

Motion detector with 280° detection area and anti-creep zoneMechanical range adjustmentDifferent follow-up time depending on direction of movementUninterrupted parallel circuit detection of several detectorsManual switching via push-button possibleAdjustable ball headImmediate operation using factory settingsAdditional functions can be set up using the optional remote control.Socket compatibility with RC-plus (next) and VarioEasy mounting thanks to plug baseWall, ceiling and corner mountingFactory settings 3 min and 20 luxApplication examples:for narrow premises, walkways, gateways

Occupancy detector pd3n-1c/fc

Product: PD4-M-1C-i (92585) Presence / motion detector LUXOMAT® PD4-M-1C as Master version for wall mounting, recessed ceiling and wall. Thick relay for ignition of lamps with high consumption especially optical system for detecting the smallest movements. You can connect an unlimited number of slaves for cheap extension of the detection area! Series production impulse function. Application examples: monitoring of large surfaces such. parking garages, gyms, warehouses, loading ramps, halls etc. Power supply voltage: 230V ~ ± 10%. Detection range: 360 ° Range (around) m: - sitting Ø 6.40 m - across Ø 24.00 m - head Ø 8.00 m Protection: IP20 / Class II / CE. Dimensions: Ø 97 x H 103 mm. Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high-quality. Channel 1 (light control) Max Load: 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5. Time settings: 15 sec. - 30 min. or pulse Brightness Value: 10-2000 Lux. Power consumption:> 0.5W.

Product: CdS -T-P (92367) Twilight switch with integrated switch can be operated remotely using the IR-CdS-T (optional) - more features than the traditional operation via rotary controller programmable energy saving periods at the touch of a button thanks to the integrated kontakturIndlæsning of the current brightness Examples of application: ideal for use in entrance zones, stairwells corridors where there must always be bright. Power supply voltage: 230V ~ ± 10%. Protection: IP54 / Class II / CE Dimensions: L 47 x W 57 x H 65 mm. Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high-quality. Remote controllable: IR-CdS-T. Energy Saving: Light off Flexible adjustable (only with IR-CdS-T). Channel 1 (light control) Max Load: 2300 W, power factor measure = 1 1150 VA, power factor measure = 0.5 Brightness Value: 2-300 Lux.

• Påbygningsunderlag til KNX-N• IP54

Binary DALI input device for installation in in-wall sockets4 inputs for conventional push buttons, freely configurableOperating modes: Standard, staircase or scene modeIntegrated LED to determine location of dismantled deviceIntegrated buzzer to determine location of installed deviceDIP- and HEX-switch for quick commissioning with basic functionalityFull range of functions can only be activated with other products of the product group B.E.G. LUXOMAT®net DALI LINK

Product: PD4-M-1C-K-P (92587) Presence / motion detector LUXOMAT® PD4-M-1C-K-P for mounting in fixed ceiling or PL canned, with narrow detection range specifically for korridorer. Kraftigt relay for ignition of lamps with high consumption. In particular, an optical system for detecting the slightest movements. Series production impulse function Application examples: monitoring of long corridors etc. Power supply voltage: 230V ~ ± 10%, Detection: 360 ° Range (around) m: - sitting Ø 6.40 m - across Ø 24.00 m - head Ø 8 00 m Protection class: IP20 / Class II / CE, Dimensions: Ø 97 x H 103 mm. Ambient temperature: -25 ° C to + 50 ° C Housing: UV-resistant High-quality polycarbonate Channel 1 (light control), Max load: 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5 Time settings: 15 sec. - 30 min. or pulsed. Brightness Value: 10-2000 Lux. Power consumption:> 0.5W

Product: PD4-S-i (92254) Presence detector LUXOMAT® PD4-S, Slave and the range for recessed ceiling. Large energy savings potential especially in large spaces and in monitoring of large surfaces. It requires only a Master of ignition of light and ventilation. Possibility of detection of movement in all local segments with slaves pulse signal to the Master of detected movement. Movement Detection independent of ambient brightness sensor and præstationsdel in a cabinet. Application examples: monitoring of large redundant surfaces, for example. parking garages, gyms, warehouses, loading ramps, halls etc. Power supply voltage: 230V ~ ± 10%. Detection range: 360 °. Range (around) m: - sitting Ø 6.40 m - across Ø 24.00 m - head Ø 8.00 m Protection: IP20 / Class II / CE. Dimensions: Ø 97 x H 103 mm. Ambient temperature: -25 ° C to + 50 ° C Housing: UV-resistant polycarbonate high-quality. Pulse function: Pulse spacing 2 sec. or 9 sec. Slave output Slave device: 230 V. Power consumption:> 0.5W

Product: CdS-P (92369) Twilight switch LUXOMAT® CdS-P for the automatic control of lighting. Setting the light value and on / off - helped by a potentiometer outside. LED help the adjustment, on / off - with intelligent twilight. Integrated control function (10Lux / 40sek. Turn - / 120sek. Off delay) It is possible to connect double lines bottom Large terminal area Wall or mast Closing the enclosure using the click - mechanism. Examples of application: ideal for use in entrance areas, stairwells corridors where there must always be bright. Power supply voltage: 230V ~ ± 10% Protection: IP54 / Class II / CE. Dimensions: L 42 x W 80 x H 96 mm. Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant High-quality polycarbonate Channel 1 (light control) Max Load: 2300W, power factor measure = 1 1150W, power factor measure = 0.5. Delay time when you turn on / off: 1 - 120 sec. Brightness Value: 1 - 1000Lux.

Product: PD2-M-2C-P (92150) Presence / motion detector LUXOMAT® PD2- M-2C as Master version for wall, ceiling or PL can. Two channels, one for switching on the lighting, and a potential for ignition of HVAC (heating, air conditioning and ventilation). You can connect an unlimited number of slaves for the extension of the detection area! Several different programs with the remote control LUXOMAT® IR-PD. Application examples: offices, conference rooms, schools, kindergartens, hospitals Mains voltage: 230 V ~ ± 10%. Detection range: 360 ° Range (around) m: - sitting Ø 4.00 m - across Ø 10.00 m - head Ø 6.00 m. Protection: IP20 / Class II / CE Dimensions: Ø 98 x H 50 mm Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high-quality. Channel 1 (light control) Max load: 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5, Time settings: 15 sec. - 30 min. or impulse, Brightness Value: 10-2000 Lux, Channel 2 (HVAC) Max load: Shutter, NO contact, 3 A, 230 V, power factor measure = 1 Time settings: Alarm pulse, impulse or 5-120 min. Power consumption:> 0.5W

Product: LC-plus 280 (91008) white. Motion sensor, which is electronically controlled by a microprocessor with 360 ° creep zone for a complete monitoring. adjustable ball head optics. Uncovering not desired detection zones while placing infinitely displaceable guard, which all detection zones below 280 °, for example. 90 °, 130 ° or 230 °, can be realized. cover 360 ° - creep zone included. Setting the twilight threshold and delay time with two potentiometers on the ball head underside. Factory preset program for immediate deployment with twilight setting at approximately 20 lux and a delay time of 3 minutes. Wall or outer corner with special socket (provided). Application examples: monitoring two house sides simultaneously, garage or driveways. Power supply voltage: 230V ~ ± 10%. Detection range: 280 °. Range (around) m: max. 16 m by moving across the detection area (tangential). Protection: IP44 / Class II / CE. Dimensions: L 100 x W 68 x H 78 mm. Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high-quality. Remote controllable: IR-LC-plus, IR-LC-Mini Channel 1 (light control). Max Load: 2000 W, power factor measure = 1, 1000 W, power factor measure = 0.5. Time settings: 15 sec. - 16 min .. Brightness Value: 2-2500 Lux.

Product: PD4-S-P (92142) Presence detector LUXOMAT® PD4-S, Slave and the range for mounting in fixed ceiling or PL can. Large energy savings potential especially in large spaces and in monitoring of large surfaces. It requires only a Master of ignition of light and ventilation. Possibility of detection of movement in all local segments with slaves pulse signal to the Master of detected movement. Detection of movement independent of the ambient brightness. Application examples: monitoring of large redundant surfaces, for example. parking garages, gyms, warehouses, loading ramps, halls etc. Power supply voltage: 230V ~ ± 10%. Detection range: 360 °. Range (around) m: - sitting Ø 6.40 m - across Ø 24.00 m - head Ø 8.00 m Protection: IP20 / Class II / CE. Dimensions: Ø 97 x H 103 mm. Ambient temperature: -25 ° C to + 50 ° C Housing: UV-resistant polycarbonate high-quality. Pulse function: Pulse spacing 2 sec. or 9 sec. Slave output Slave device: 230 V. Power consumption:> 0.5W.

Product: PD4-S-DALI-i (92721) Presence detector LUXOMAT® PD4-S-DALI-i, for recessed ceiling. DALI slave sensor which is used with the master: PD4-M-DAA4G. Detection range: 360 ° Range (around) m: - sitting Ø 6.40 m - across Ø 24.00 m - head Ø 8.00 m.

Product: PD4-S-GH-P (92265) Presence detector LUXOMAT® PD4-S- GH, Slave with oval detection range and the range for mounting in fixed ceiling or PL dåse.Stort savings potential especially in large spaces and in monitoring of large surfaces. It requires only a Master of ignition of light and ventilation Possibility of detection of movement in all local segments with slaves pulse signal to the Master of detected movement. Detection of movement independent of the ambient brightness. No setting items on the Slave. Sensor and præstationsdel in a cabinet. Application examples: monitoring of warehouses and warehouse with high racks, where the mounting height is great. Power supply voltage: 230V ~ ± 10%. Detection range: 360 ° .Rækkevidde (approximately) im - across Ø 44.00 m. Protection: IP20 / Class II / CE. Dimensions: Ø 98 x H 63 mm Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high quality Slave output Slave device: 230 V. Power consumption:> 0.5W.

Digital time switch with week program for installation in switch cabinets1 channelSwitching capacity 16 APermanent by date / holiday functionDaily and weekly programPulse function46 memory locationsMinimum interval 1 min.Manual permanent modeManual overrideAutomatic sorting of switching times on readoutUnrestricted block programmingFully automatic daylight saving timeElapsed time and pulse counterSecurity by PIN code

DALI pushbutton module with 4 binary inputs and integrated Bluetooth gateway for hidden mounting behind flush mount switches.Parameterisation of the DALI LINK solution via Bluetooth with a smartphone and the B.E.G. BLE App.4 inputs for conventional push buttons, freely configurableSeemless integration in DALI single-room solution B.E.G. LUXOMAT®net DALI LINK as modular multimaster option for lighting controlOperating modes: Standard, staircase or scene modeIntegrated buzzer to determine location of installed deviceFull range of functions can only be activated with other products of the product group B.E.G. LUXOMAT®net DALI LINKAndroid - play.google.com/store/apps/details iOS - itunes.apple.com/de/app/b-e-g-luxomatnet-dali-link/id1342462121

Product: Indoor 180-M-2C (92136)for installation in EURO canned or on substrates. Fjernbetjenbar presence detectors LUXOMAT® Indoor 180-M-2C Master as wall sensor with 180 ° detection. Can be combined with hedging hits in five different colors. In connection with the frame suitable for all common IP switch products. Two channels, one for switching on the lighting, the other potential free to the ignition of HVAC (heating, air conditioning and ventilation). You can connect an unlimited number of slaves for cheap extension of the detection area! Fixtures IP20 and IP54. Measurement of mixed light, day and artificial light (principle of presence sensor) Brightness level and delay time can be adjusted. For mounting heights from 1.10 to 2.20 m with accessory support (92141) can be mounted on the outside of a wall. Application examples: monitoring of public lavatories, corridors, archive rooms, etc. Covers must be ordered separately! Power supply voltage: 230V ~ ± 10%. Detection range: 180 ° Range (around) m: max. 10,00m, Protection: IP20 / Class II / CE, Dimensions: L 87 x W 87 x D 61 mm Ambient temperature: -25 ° C to + 50 ° C , Housing: UV-resistant polycarbonate high-quality. Remote controllable: IR-PD IR-PD-Mini. Channel 1 (light control) 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5. Time settings: 15 sec. - 30 min. or pulse Brightness Value: 5-2000 Lux, Channel 2 (HVAC): Max Load: Shutter, NO contact, 3A, 230V, power factor measure = 1 Time settings: Alarm pulse, impulse or 5 - 120min. Power consumption:> 0.5W.

Product: PD2-S-i (92166) Presence detector LUXOMAT® PD2-S, Slave with 360 degree field of detection for recessed ceiling. Large energy savings potential. It requires only a Master of ignition of light and ventilation. Possibility of detection of movement in all local segments with slaves. The pulse signal to the Master of detected movement. Movement Detection independent of ambient brightness No setting items on the Slave sensor and præstationsdel in a cabinet Application examples: meeting rooms, class rooms, single offices, garages Mains: 230 V ~ ± 10% Detection range: 360 ° Range (around) m: - sitting Ø 4 00 m - across Ø 10.00 m - head Ø 6.00 m Protection: IP20 / Class II / CE Dimensions: Ø 80 x H 84.5 mm Ambient temperature: -25 ° C to + 50 ° C Cabinet: of UV-resistant polycarbonate high quality Pulse function: Pulse spacing 2 sec. or 9 sec. Slave output Slave device: 230 V Power consumption:> 0.5W

Product: PD4-M-1C-GH-P (92245) Presence / motion detector LUXOMAT® PD4-M-1C-GH-P Master version for ceiling mounting with oval detection area and about 44 m range specifically for the storage of high shelving. Thick relay for ignition of lamps with high consumption can connect an unlimited number of slaves for cheap extension of the detection area! Instant commissioning with factory settings. Turning the lighting as well as setting the parameters with the remote control LUXOMAT® IR-PD4-GH. Application examples: monitoring of warehouses and warehouse with high racks, where the mounting height is great. Power supply voltage: 230V ~ ± 10% Detection range: 360 ° Range (around) m: - across Ø 44.00 m Protection: IP20 / Class II / CE. Dimensions: Ø 98 x H 63 mm Ambient temperature: -25 ° C to + 50 ° C Housing: UV-resistant High-quality polycarbonate Channel 1 (light control), Max load: 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5 Time settings: 15 sec. - 30 min. or pulse Brightness Value: 10-2000 Lux 15 seconds. - 30 min. or pulse Brightness Value: 10-2000 Lux. Power consumption:> 0.5W

Product: IR ADAPTOR (92726) Infrared adapter for smartphone (Android and iPhone) that can program all BEG sensors, not KNX. Remember to download the free app.