Anslutande utrustning - sita 11

Mechnical cable lug 25-95 mm2Palm Hole Ø = 17mmsektor 25-70 (95)

Shrink sleeve 4-5X1.5-4 (6) mm2 Product description:

PE terminal WPE 16N green/yellow Wemid with screw terminal for 1.5-16mm2 400V

SIB D4325109 mutter Låsmutter M25 25 styck

SIB D4350101 mutter Låsmutter M50 10 styck

3MTM Heat Shrink Wraparound Cable Repair Wrap Sleeves HDCW are designed to quickly repair damaged cable jacketing. They may also be used to rejacket in-line splices.

Complete heat shrink kit for reperations.

Can be used for both copper-or aluminium conductors. With the Al-conductors, It's recommended to use anti-corrosion paste. (i.e. Penetrox). It is allowed to use max. of three adjacent cross-sections in one space (Copper conductors). The nominal max. cross-section value must not be exceeded. When used Al-conductors, it is allowed to use only one conductor/ one space.

Shrinking sleeve Ø8-17 mm 102L022

Cable gland HSK-K-NPT1/2 6-12MM IP68 1209120070

Compression joint AL 120/150mm2Suitable for 120mm2 sm/150mm2 se pre-rounded sector shaped conductors For non-tension connections of aluminum conductors DIN EN 60228 and aluminum overhead lines acc to DIN EN 50182 Acc to DIN 46267 part 2 Filled with contact grease for optimum crimp characteristics Easy processing by crimp marks Material: E-Aluminium

Ground modular terminal block, Connection method: Screw connection, Cross section: 0.2 mm2 - 10 mm2, AWG: 24 - 8, Width: 8.2 mm, Color: green-yellow, Mounting type: NS 35/7,5, NS 35/15

Compression joint AL 95/120mm2Suitable for 95mm2 sm/120mm2 se pre-rounded sector shaped conductors For non-tension connections of aluminum conductors DIN EN 60228 and aluminum overhead lines acc to DIN EN 50182 Acc to DIN 46267 part 2 Filled with contact grease for optimum crimp characteristics Easy processing by crimp marks Material: E-Aluminium

Butt-connector 0.75,mm2 For multi-stranded conductors eg VDE 0295 Class 2 For pre-rounded multi-stranded sector shaped conductors With buttmarks for precise cable insertion Item identification on cable lug Material: Copper acc to EN 13600

SIB F7422000E kabelgenomföringar Blå Polyamid 50 styck

Cobber tube terminal KRT70-8Material: Cu 99.95%, tin plated Cu/SnFor 70mm2 stranded (class 2) acc. IEC 60228With inspection holePalm M8Recommended tool: TH10120T, T3165C, PVL350, V600, V611, PVX611, V1300, V1300C2, V1311-A, V1311C2-A, PVX1300, PVX1300C2, DV1300, DV1300C2, V250, DV250Die no.: 16

Cover for terminal plate

SIB C5216200 kabelgenomföringar Nickel mässing, Nickel 50 styck

SIB C5021000 kabelgenomföringar Nickel mässing, Neopren, Nickel 20 styck

Reparation coupling 34/10 - 1000 mm.

Shrink tubing MWTM 25/8 1.0 with adhesive Product description: Medium-walled shrink tubing with adhesive, MWTM 25/8, length of 1000 mm Technical specifications: Wall thickness (mm): 2.0 Application range, cable diameter (Ø mm): 9.0-22.5

Cobber tube terminal KRF16-12Material: Cu 99,95%, tin plated.For 16mm2 stranded (class 2) and flexible (class 5+6) Cu-conductors acc. IEC60228. Palm M12.With inspection hole.Recommended tool: PVL350, V600, V1300, V250.Die no. 9.

ETW-803 is a flexible heat shrinkable tubing with a co-extruded hot melt adhesive inner wall. The excellent flowproperties of the adhesive ensure good environmental sealing of complex parts. As this tubing shrinks, molten adhesive flows and is forced into gaps and crevices. When the adhesive cools it forms a seal against moisture and other fluids whilst the outer wall provides mechanical protection. ETW-803 is well suited for environmental sealing of a variety of electronic, electrical and mechanical applications such as connections, joints etc. ETW-804 with a shrink ratio of 4 : 1 accommodateswide variances in diameter.

HSK-K-M20X1,5 6-12MM IP68 PA -1209200250

Reparation coupling 143/36-1000 mm.