Anslutande utrustning - sita 25

Tubular cable lug 10mm2 M12For multi-stranded round shaped conductors eg VDE 0295 Class 2 For pre-rounded multi-stranded sector shaped conductors With inspection holeMaterial: Copper acc to EN 13600

SIB D4350101 mutter Låsmutter M50 10 styck

Compression joints with copper connecting bolt 50/70mm2Al rm/sm 50 se 70 for pre-rounded sector shaped conductorsFor non-tension connections of Al cables acc to DIN 60228 and aluminum cables acc to DIN EN 50182 With crimp markings for correct crimping Material E-Aluminum Copper acc to EN 13600

W-Series, PE terminal, Rated cross-section: 35 mm2, Screw connection, Screwed

Reparation coupling 143/36-1000 mm.

Ouneva copper cable lugs designed for connecting copper cables, coils and busbars. The lugs are manufactured of 99,9% pure copper and electrolytically coated by tin. Cable lugs are also compatible with PEX cables. Installation of the cable lugs can be performed by the most basic crimping tools. PK-series cable lugs are compatible with all kind stranded (also compressed) wires.

SIB F7022050 kabelgenomföringar Grå Polyamid 50 styck

HSK-M-PG11 5-10MM IP68 - 1609110001

DK 1010 G- 4-10 mm2, Cu 3~- terminal with 2 clamping units per pole- 5-pole per pole 6 x 2.5 mm2 sol, 4 x 4 mm2 sol, 4 x 6 mm2 sol, 4 x 10 mm2 sol, 2 x 16 mm2 s- with elastic membranes, which can be removed for cable entry via cable glands, sealing range 9.0-21.0 mm- with two cable entries in the bottom, sealing range Ø 9.0-20.0 mm- lid fasteners sealable without accessories- retaining strap and external brackets for wall fixing included- colour: grey, RAL 7035- To close opened membranes use grommets type EDK. Degree of protection = IP 66.

Accessories, Busbar, Copper,

Cable gland HSK-M-NPT3/4 13-20MM IP68 1609340070

3M Brand PST Cold Shrink Connector Insulators are a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this pre-stretched condition. The core is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber, which contains no chlorides or sulphurs. Six diameter sizes will cover a range of 1000 volt cables, copper and aluminium conductors.

The counternut with cutting edges forsecure fixing of EMC cable glands -for cutting through painted surfaces to ensure optimum contact with equipotentialbonding-Increased vibration resistance.Technical data:Temperature range: up to +200°C

SIB C5250100 kabelgenomföringar Nickel mässing, Nickel 10 styck

This splice meets requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1 kV. This size is listed for availability only and is not designed to be used as primary insulation. This tube is for conduit sealing an breakout. Important: Use wire insulation/jacket diameters and connector O.D. for final sizing confirmation.

Cobber tube connector KST10Material: Cu 99.95%, tin plated Cu/SnFor 10mm2 stranded (class 2) acc. IEC 60228With inspection hole and interior cable stopRecommended tool: TH10120T, TH0650T, PVL350, V600, V611, PVX611, V1300, V1300C2, V1311-A, V1311C2-A, PVX1300, PVX1300C2, DV1300, DV1300C2Die no.: 7

Tubular cable lug 10mm2 M10 For multi-stranded round shaped conductors eg VDE 0295 Class 2 For pre-rounded multi-stranded sector shaped conductors With inspection holeMaterial: Copper acc to EN 13600

7 Brass terminals 3x16 + 4x10 mm2 neutral

Cobber tube terminal KRF70-10Material: Cu 99,95%, tin plated.For 70mm2 stranded (class 2) and flexible (class 5+6) Cu-conductors acc. IEC60228. Palm M10.With inspection hole.Recommended tool: PVL350, V600, V1300, V250.Die no. 17.

Cobber tube terminal KRF50-12Material: Cu 99,95%, tin plated.For 50mm2 stranded (class 2) and flexible (class 5+6) Cu-conductors acc. IEC60228. Palm M12.With inspection hole.Recommended tool: PVL350, V600, V1300, V250.Die no. 14,5.

Ouneva OTL-connectors are designed to be used when connecting and branching aluminium and copper cables. Bodies and tightening screws of the connectors are made of aluminium and plated by tin. Insulating covers are made of plastic.