Vinkelslip, sladdlös, 115 mm, inget batteri, 18 V

Vinkelslip DGA513 LXT är en 18V sladdlös borstlös vinkelslip med variabel hastighet, 3000 - 8500 min⁻¹, konstant elektronik, överbelastningsskydd och ett AVT antivibrations-sidohandtag.

Denna kompakta Makita vinkelslip är utformad för krävande professionell användning och fungerar med Li-ion LXT-batterier, levereras utan batteri och laddare.

• Borstlös motor
• Variabel hastighetskontroll
• Active Feedback sensing Technology stoppar maskinen om den blockeras
• Automatic torque Drive Technology justerar vridmoment och hastighet under belastning
• Batteriskydd mot överurladdning, hög temperatur och överbelastningsström
• Anti-omstartfunktion och elektrisk broms

Byggd för kontrollerad slipning med praktiska säkerhets- och prestandafunktioner för professionella metallbearbetningsuppgifter.

Obs: Bulk-version av produkten som levereras i plastpåse i stället för i typisk kartong - Enheten är dock fortfarande ny och oanvänd.

 

Cordless angle grinder 18 V/125 mm DGA511Z, 18 V, Idle speed 3000 - 9000 rpm, Protective hood 125 mm without tools

Vinkelslip, 720 W, 125 mm

Angle grinder, 18 V

Vinkelslip, sladdlös, 115 mm, inget batteri, 18 V

125MM ANGLE GRINDER
The electronic variable speed control offers added tool control and enables the tool to be used at optimum conditions to suit the accessory and material. Electro-mechanical clutch reduces the "kickback" transmitted to the operator if the cutting disc jams. No volt release switch will prevent the unit starting when plugged in, even if the switch is in the on position. Switch must be consciously reset before power is delivered. Overload protection will prevent the unit over heating by shutting the unit off until the unit has cooled down. Dust ejection system removes majority of debris from the air which passes over the motor, preventing abrasion and tracking. Anti vibration side handle to improve user comfort

Vinkelslip, sladdlös, 1000 W, 125 mm, 18 V

Varan kan komma att skickas i icke-originalförpackning.

Vinkelslip, sladdlös, 125 mm, inget batteri, 18 V

18V Brushless Motor. Electronic Brake stops the wheel quickly when the trigger is released. Electronic Clutch reduces the kickback reaction in the event of a pinch or stall. Mesh Covers restricts dust being sucked through the motor. Rubber Overmould provides enhanced grip and comfort. Two position side handle offers greater comfort and control

Vinkelslip, 2200 W, 230 mm

With X-LOCK function, one click and the disc is mounted. To change to a new disc, pull the lever back, remove the disc and the new one can be quickly mounted without using tools.

Bosch Professional GWS 12V-76 Sladdlösa vinkelslipar, Batterispänning: 12 V, Oscillationsfrekvens obelastad: 19.500 v/min., Navrondell/kapskiva, Ø: 76 mm
Innehåller:
Kartong; 1/2 L-BOXX-inredning för GWS 12V-76 (1 600 A00 F0F); 1 x karbidkapskiva, Carbide Multiwheel, 76 x 10 mm (2 608 623 011); 2 x inox kapningsskivor, Expert for Inox, 76 x 10 mm (finns separat i sats om 5: 2 608 601 520)

Angle grinder, cordless, 18 V

The item may be shipped in non-original packaging.

The X-LOCK cutting wheel Standard for Inox ensures reliable properties in steel. The narrow cutting edge of the disc provides for smooth cuts without great effort. In addition, the disc is free of iron, sulfur and chlorinated fillers. Bosch cutting discs meet the highest safety requirements such as EN 12413. Use this disc to cut steel. X-LOCK cutting discs also fit standard angle grinders. Thanks to the keyless X-LOCK system, the cutting discs can be changed quickly and easily. Specification: WA 60 T BF, diameter mm: 125, bore diameter mm: 22.23, thickness mm: 1.6, X-LOCK

Vinkelslip, 900 W, 125 mm

Makita DMC300Z Akku-Winkelschleifer vinkelslipmaskiner 7,6 cm 2000 RPM 820 g

Angle grinder

Vinkelslip, sladdlös, 125 mm, 18 V

Bosch EXPERT N475 SCM Slipskiva

Vinkelslip, 880 W, 125 mm

No-volt release switch prevents restart without the switch being recycled in the event of a power failure. Lock-on switch feature for continuous use. Abrasion protected motor for increased durability. Two position side handle allows the user to optimise handle position to give maximum comfort. Spindle lock for quick wheel changes. Brush window allows quick brush replacement.

Vinkelslip med 850 W effekt, 125 mm skivstorlek, upp till 11500 varv/min och säkerhetsfunktioner inklusive återstartsskydd och ett vridsäkert skydd.

Metabo W 850-125 - vinkelslip är byggd för slip- och poleringsarbeten, med M14 spindelgänga och märkmoment på 2 N·m för kontrollerad drift.

• 11500 varv/min hastighet (7000 varv/min vid angiven belastning)
• 520 W uteffekt
• M14 spindelgänga
• Återstartsskydd
• Vridsäkert skydd
• Inkluderar sidohandtag, fläns, nyckel, flänsmutter och skivskydd

Pålitlig hantering och medföljande tillbehör gör den redo för precisionsarbete i verkstaden varje dag.

The electronic variable speed control offers added tool control and enables the tool to be used at optimum conditions to suit the accessory and material. Electro-mechanical clutch reduces the "kickback" transmitted to the operator if the cutting disc jams. No volt release switch will prevent the unit starting when plugged in, even if the switch is in the on position. Switch must be consciously reset before power is delivered. Overload protection will prevent the unit over heating by shutting the unit off until the unit has cooled down. Dust ejection system removes majority of debris from the air which passes over the motor, preventing abrasion and tracking. Anti vibration side handle to improve user comfort. Guard design allows guard fitment, adjustment or removal without the use of tools, for increased flexibility. Fully leaded stator windings for increased motor durability. Pop off brushes protect the armature from damage at the end of brush life resulting in greater motor durability. Small girth allows comfortable gripping resulting in superior ergonomics. The low profile gearcase allows access in confined areas. Abrasion protected motor for increased motor durability. Anti lock flange prevents flanges from permanently locking up and locking the disc on. One piece brush arm prevents brush hang up in extreme conditions. Side positioned spindle lock gives greater protection to button when using in confined spaces

DeWALT DCG407N-XJ vinkelslipmaskiner 12,5 cm 9000 RPM 1,6 kg