Viega - sita 43

Viega 1115.5

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Viega 3241

Sanpress Coupling with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elementsd: 28

Viega 2311.1

Screw fitting- gunmetal- R-thread, Rp-thread- conical sealing

Viega 2615

Profipress T-piece with SC-Contur- copper- press connectorsComponentsEPDM sealing elements, VdS certificationd1: 28, d2: 28, d3: 28

Viega 2215.1

T-piece- gunmetal- solder connection, Rp-threadd1: 22, Rp: 12, d2: 22

Sanpress connection screw fitting with SCContur - gunmetal or silicon bronze - press connection, G-thread - flat sealing.Components EPDM sealing element, EPDM flat seal, union nut screw fitting.

Viega 2318

Viega 2326XL

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2316.1

Self-locking insulating shell for DN 15/20.

Viega 2212

Viega 2211

Reducing coupling - copper - soldered connection d1: 18, d2: 15(quality seal for d12-54)

Elbow 45°- copper- soldered connectiond: 12(quality seal for d12-54)

Viega 2611

Viega 2611

Viega 2312.1

Sanpress Inox Connection screw fitting with SC-Contur- steel non-corroding- press connection, G-thread- flat sealingComponentsEPDM sealing element, EPDM flat seal, union nut screw fitting d: 15, G: 12

Viega 2415