UNI-T Verktyg

The UNI-T UT673A is a car battery tester designed for fast and accurate diagnostics of 12 V lead-acid starter batteries with capacities from 3 Ah to 250 Ah. It measures key parameters including voltage, capacity, internal resistance, and battery health, while also checking 12 V and 24 V starting and charging systems. Four-point Kelvin measurement helps reduce the influence of lead resistance for more precise results. The tester supports 10 battery standards and displays results clearly on the screen, supplemented by an LED traffic-light indicator for quick assessment. Its compact design makes the UT673A suitable for both workshop and mobile diagnostics.

The Uni-T UT663B-2m is an industrial borescope designed for inspecting narrow, curved, and hard-to-reach areas without dismantling components. It features a 5.0-inch display, an 8 mm CMOS camera, and a 2-meter rigid metal cable for extended reach. The camera head supports 180° bidirectional rotation, allowing the viewing angle to be adjusted during inspection. The borescope captures 1920 × 1080 photos and records 1920 × 1080 AVI video, while eight LEDs with adjustable brightness provide clear illumination in dark areas. An IP67-rated camera, 3000 mAh battery, and 32 GB TF card make it suitable for technical and maintenance inspections.

The Uni-T UT663B-3m is an industrial borescope designed for inspecting narrow, curved, and hard-to-reach areas without dismantling components. It features a 5.0-inch display, an 8 mm CMOS camera, and a 3-meter rigid metal cable for extended reach. The camera head supports 180° bidirectional rotation, allowing the viewing angle to be adjusted during inspection. The borescope captures 1920 × 1080 photos and records 1920 × 1080 AVI video, while eight LEDs with four brightness levels provide illumination in dark areas. IP67 camera protection, a 3000 mAh battery, and a 32 GB TF card make it suitable for technical, maintenance, and diagnostic inspections.

The Uni-T UT261B is a compact tester for checking phase sequence, phase loss, and motor rotation direction in three-phase electrical installations. It operates with AC voltages from 90 to 600 V and frequencies from 15 to 400 Hz, making it suitable for testing electrical systems and drive equipment. LED indicators clearly show the detected phase sequence, phase loss, and motor rotation direction, allowing incorrect connections to be identified quickly. With its compact 123 × 71 × 29 mm design and 180 g weight, the tester is easy to carry and use during installation, maintenance, and troubleshooting.