Verktyg för VVS-arbete

Rems Pipe scissors ROS P 42 S

Handy quality tools for clean, fast pipe cuts. For thin-walled pipes also. Sturdy aluminium design. For single-hand operation.Plastic pipes, multi-layer composite tubes Ø 42 mm Ø 158

2 198,00 kr (1 758,40 kr)

Leverantör, 3-4 vardagar leveranstid

Rems Cutting head 1/2" 521030

Proven technology, high-grade material and precise machining of die head, dies and cover form a unit and ensure an excellent start-cutting performance and easy threading. No stalling of dies. Long, precise pipe guidance for perfect pipe centering. The chip holes which become wider at the outside enable good chip flow and clean threads. Pipe threads R tapered, right-hand ISO 7-1, EN 10226 (DIN 2999, BSPT)

2 296,00 kr (1 836,80 kr)

Leverantör, 3-4 vardagar leveranstid

Rems Special cutting wheel St for MA - SML (Cento)

REMS cutter wheel St for steel pipes, cast iron pipes (SML)

1 601,00 kr (1 280,80 kr)

Leverantör, 2-3 vardagar leveranstid

Ridgid RP-219 presskæbe 19 kN U25

Ridgid rp-219 jaw 19 kn u25

1 798,00 kr (1 438,40 kr)

Leverantör, 2-3 vardagar leveranstid

Ridgid RP-219 presskæbe 19 kN M22

Ridgid rp-219 jaw 19 kn m22

1 798,00 kr (1 438,40 kr)

Leverantör, 2-3 vardagar leveranstid

KNIPEX TwinGrip, Muttertänger

KNIPEX 82 200 E01 Reservdelssats för 82 0x 200

482,00 kr (385,60 kr)

Leverantör, 4-5 vardagar leveranstid

KNIPEX Tångnyckel, Tång- och skruvnyckel i ett verktyg

KNIPEX 86 06 250 Tångnyckel Tång- och skruvnyckel i ett verktyg Isolerat med flerkomponentsöverdrag, VDE-testat förkromad 250 mm

719,00 kr (575,20 kr)

Leverantör, 4-5 vardagar leveranstid

Rems Crimping pliers Mini V28 578336

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 703,00 kr (1 362,40 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers M28 570140

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 621,00 kr (1 296,80 kr)

Leverantör, 3-4 vardagar leveranstid

Andersen & Nielsen Rothenberger tube cutter 35 inox 6-35mm duramag

TUBE CUTTER 35 / 42 PRO INOXProven pipe cutter Ø 6 - 42 mm (1/4 - 1.5/8") forthe precise cutting of stainless steel pipesKEY FEATURESHardened, special cutter wheel made of high-alloyed steel.External burr-free cutting.Stainless steel guide rolls, cuts near flares possible.Optimum use in tight places.Quick adjustment of the working area.Retractable pipe internal deburrer.Rugged and robust.

1 722,00 kr (1 377,60 kr)

Leverantör, 2-3 vardagar leveranstid

Ridgid Straplock rørholder 80 - 220 mm

Ridgid straplock pipe handle 80 - 220 mm

626,00 kr (500,80 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Mini cobra pipe cleaner 170010

Proven hand unit for quick application to remove pipe blockages in kitchen, bath, toilet.For pipes Ø 20–50 (75) mm. For cables Ø 6, 8, 10 mm.REMS Mini-Cobra – by hand or electric.Indispensable to remove small blockages.

2 326,00 kr (1 860,80 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini up 25

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

2 074,00 kr (1 659,20 kr)

Leverantör, 3-4 vardagar leveranstid

BAHCO Tube cutter 22 mm

Bahco 301-22 rörskärmaskin

274,00 kr (219,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini up 32

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

2 059,00 kr (1 647,20 kr)

Leverantör, 3-4 vardagar leveranstid

Ridgid RP-219 presskæbe 19 kN U16

Ridgid rp-219 jaw 19 kn u16

1 835,00 kr (1 468,00 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Special cutting wheel Cu-INOX Nano

REMS cutter wheel Cu-INOX for stainless steel pipes of pressfitting systems, copper, carbon steel

585,00 kr (468,00 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini TH16 578352

High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC & REMS Mini-Press 22V ACC drive units. Read and follow the installation and assembly instructions of the system provider/manufacturer.

2 172,00 kr (1 737,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Cutting wheel Cu-INOX 3-120 p 4

Specially hardened cutter wheel in approved, tough-hard REMS die-steel quality ensures a long service life.REMS cutter wheel Cu-INOX 3 – 120, s 4Copper tubes, stainless steel tube

227,00 kr (181,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Deburr 3-35mm 113900

Fast, easy deburring with 3 specially hardened and specially ground deburring blades. Robust housing in impact-resistant, robust plastic. External/internal pipe deburrer. For copper, brass, aluminium, steel, plastic pipes, Ø 3 – 35 mm, Ø 1/8 – 1 3/8".

329,00 kr (263,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini V22 578334

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 769,00 kr (1 415,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini HE32 578370

REMS pressing tongs MiniVery compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.

2 903,00 kr (2 322,40 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Pliers V35 570155

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 802,00 kr (1 441,60 kr)

Beställningsvara - leveranstid kan ej upplysas

Rems Crimping pliers Mini M22 578316

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 678,00 kr (1 342,40 kr)

Leverantör, 3-4 vardagar leveranstid

Rems Crimping pliers Mini M15 578312

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 571,00 kr (1 256,80 kr)

Leverantör, 3-4 vardagar leveranstid

Måndag-Fredag:	09.00 - 15.00
Lördag, Söndag & danska helgdagar:	Stängt
Lunchstängt:	12.00 - 13.00

Kontakta oss

Verktyg för VVS-arbete - sita 6

Rems Pipe scissors ROS P 42 S

Rems Cutting head 1/2" 521030

Rems Special cutting wheel St for MA - SML (Cento)

Ridgid RP-219 presskæbe 19 kN U25

Ridgid RP-219 presskæbe 19 kN M22

KNIPEX TwinGrip, Muttertänger

KNIPEX Tångnyckel, Tång- och skruvnyckel i ett verktyg

Rems Crimping pliers Mini V28 578336

Rems Crimping pliers M28 570140

Andersen & Nielsen Rothenberger tube cutter 35 inox 6-35mm duramag

Ridgid Straplock rørholder 80 - 220 mm

Rems Mini cobra pipe cleaner 170010

Rems Crimping pliers Mini up 25

BAHCO Tube cutter 22 mm

Rems Crimping pliers Mini up 32

Ridgid RP-219 presskæbe 19 kN U16

Rems Special cutting wheel Cu-INOX Nano

Rems Crimping pliers Mini TH16 578352

Rems Cutting wheel Cu-INOX 3-120 p 4

Rems Deburr 3-35mm 113900

Rems Crimping pliers Mini V22 578334

Rems Crimping pliers Mini HE32 578370

Rems Pliers V35 570155

Rems Crimping pliers Mini M22 578316

Rems Crimping pliers Mini M15 578312