Rems Verktyg för VVS-arbete

Rems Crimping pliers V15 570115

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948). High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer. Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process. With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

2 002,00 kr (1 601,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Deburr REG 10-54 inox

Robust quality tool for removing outer and inner burr from pipes. Stainless steel pipes, other steel pipes, copper, brass, aluminium, steel, plastic pipes Ø 10–54 mm, Ø 1/2–2 1/8.REMS REG 10-54 – the multiple edge up to Ø 54 mm

758,00 kr (606,40 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Special cutting wheel St for MA - SML (Cento)

REMS cutter wheel St for steel pipes, cast iron pipes (SML)

1 609,00 kr (1 287,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers V18 570125

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 814,00 kr (1 451,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Deburrer REG 8-35

Robust quality tool for removing outer and inner burr from pipes.Stainless steel pipes, other steel pipes, copper, brass, aluminium, steel, plastic pipes Ø 8–35 mm, Ø 3/8–1 3/8.

733,00 kr (586,40 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Cutting head 3/8" 521020

Proven technology, high-grade material and precise machining of die head, dies and cover form a unit and ensure an excellent start-cutting performance and easy threading. No stalling of dies. Long, precise pipe guidance for perfect pipe centering. The chip holes which become wider at the outside enable good chip flow and clean threads. Pipe threads R tapered, right-hand ISO 7-1, EN 10226 (DIN 2999, BSPT)

1 767,00 kr (1 413,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers M28 570140

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 709,00 kr (1 367,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Pliers V42 570165

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

4 571,00 kr (3 656,80 kr)

Leverantör, 2-3 vardagar leveranstid

Verktyg för VVS-arbete - Rems Accu-Press ACC 22V - 576011 R220

REMS Akku-Press 22 V ACC Basic-Pack
Electro-hydraulic battery radial press with automatic return and press pressure monitoring for the production of press joints for all common press fitting systems.
Li-Ion 22 V Technology.
Pipe press joints Ø 10 – 108 (110) mm, Ø 3/8 – 4"
"M" press 12 - 54 mm

With automatic return and press pressure monitoring.
Anti-vibration system.
Safe pressing result in a few seconds.
Automatic locking of the press bar.
Battery Li-Ion 21.6 V, 2.5 Ah for approx. 200 presses of Viega Profi press DN 15 per battery charging.

For operation of REMS press bars/press rings and for suitable press bars/press rings of other makes.
Rotatable press bar attachment with automatic lock.
Electro-hydraulic drive with powerful battery motor 21.6 V, 380 W.
Anti-vibration system.
Safety switch.
LED work lamp.
Battery Li-Ion 21.6 V, 2.5 Ah, fast charger Li-Ion 230 V, 50 – 60 Hz, 90 W

28 110,00 kr (22 488,00 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini M18 578314

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 634,00 kr (1 307,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini M28 578318

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 634,00 kr (1 307,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini TH16 578352

High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC & REMS Mini-Press 22V ACC drive units. Read and follow the installation and assembly instructions of the system provider/manufacturer.

2 197,00 kr (1 757,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Pressing pliers TH 16

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.

2 368,00 kr (1 894,40 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Cutting wheel cu/inox for cento

REMS cutter wheel Cu-INOX for stainless steel pipes of pressfitting systems, copper, carbon steel

1 611,00 kr (1 288,80 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini RN32 578442

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

3 118,00 kr (2 494,40 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini U 20

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.

2 467,00 kr (1 973,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Pressing pliers HE 32

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.

4 670,00 kr (3 736,00 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Tiger bayonet saw w/bracket

REMS Tiger ANC VE set. Electric pipe bayonet saw with vario electronics (VE) for easy, fast, perpendicular sawing with pipe holder and for freehand sawing up to 6", 250 mm. Machine with spade handle, maintenance-free, water and dust protected oscillation drive with versatile needle bearing drive (ANC) , aggressive orbital stroke, 230 V, 1050 W, safety rocker switch. Universal saw blade holder for 2". 2 REMS special saw blades 2". In a stable steel case.

8 185,00 kr (6 548,00 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Special cutting wheel Cu-INOX Nano

REMS cutter wheel Cu-INOX for stainless steel pipes of pressfitting systems, copper, carbon steel

576,00 kr (460,80 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Pipe scissors ROS P26/SW 35

Robust quality tool for neat, fast cutting of pipes. With integrated pipe scissors for corrugated pipes. Stable execution of magnesium. For one-handed operation.
P plastic pipe, plastic pipe with metallic insert ≤ Ø 26 mm, ≤ Ø 1"
SW plastic corrugated pipe Ø 18 – 35 mm, Ø 3/4 – 1 3/8"

REMS ROS P 26/SW 35 – Fast cutting with one cut up to Ø 26 mm. With integrated pipe cutter for plastic corrugated pipe up to Ø 35 mm.

1 538,00 kr (1 230,40 kr)

Leverantör, 2-3 vardagar leveranstid