Värmepumpar - sita 2

Wall-mounted module with Smart. Design. in WHITE for the construction of individual facilities.

Compress 7000i AWE17 includes:

• HPC400 regulation
• electric heater
• expansion tank
• circulation pump for the heat pump
  vents
• IP/TCP module to connect the module to the free app Bosch ProControl.

CS AWE17 backup module can be combined with CS 7000i AW 13 and 17 kW air/water outdoor unit.

Plast-Line ⌀600 well h=600mm

Wi-Fi module for use with Bosch Climate 6100i, 8100i or 9100i.

Thanks to 5 world patents and new technology, you are guaranteed a heat pump that reaches completely new heights in terms of energy efficiency. The air/water heat pump is tested by the Danish Technological Institute - this is your assurance of quality. At the same time, you get a heat pump that automatically adapts to the weather conditions, which provides optimal comfort and low energy consumption.

• 5 world patents
• Lower heating bill due to a high SCOP value
• Save electricity with inverter technology, which ensures a heating solution that adapts to your needs
• Tested at the Technological Institute
• Suitable for new and older houses
• Suitable as a free-standing solution or combined with another heating system (hybrid solution)
• Saves space due to compact dimensions
• With accessories, also for heating the pool
• Attractive design

METRO Delta is the future's quiet alternative to an air-water heat pump. The small, wall-mounted heat pump utilizes heat energy from liquid, e.g. brine from the thermonet or PVT panels, to produce hot water, space heating and passive cooling for the home. The heat pump has a capacity of 4.7 kW* and is therefore perfectly suited for smaller homes – terraced houses, homes for the elderly, etc. However, its small size also makes it ideal for converting from gas in small households, as it is not much larger than the stripped-down gas boiler.

The heat pump is powered by R290 (propane), a natural refrigerant with a very low climate impact. R290 has a very small GWP (Global Warming Potential) of 3, which means that each kg of refrigerant only corresponds to 3 kg of CO₂ – in comparison with e.g. R32, which has a GWP of 675. With an impressive SCOP value of 6.2*, it produces far more energy than it consumes. It has a refrigerant charge of only 150 g, and can thus be installed in existing buildings without special safety measures.

METRO Delta is designed for use with thermonet (common ground heating), traditional ground heating or roof-mounted PVT panels. METRO Delta can handle temperatures as low as -15 °C and as high as 50 °C, and can deliver up to 70 °C in flow temperature.

METRO Delta is designed and produced in Denmark. This helps to ensure high product quality and gives you access to our skilled, Danish-speaking service team.

*At Brine 5 °C, heat 35 °C.

ELL Front ensures a fantastic indoor climate, whether it's below freezing or high temperatures. With intelligent control, easy installation and noise reduction technology, you get a user-friendly product that is also highly efficient when it comes to heating and cooling.

However, ELL Front is much more than just a practical item in the home that ensures a comfortable indoor climate. It is a striking addition to the interior and an elegant and minimalist way to combine aesthetics and functionality. With a wide range of different modern and timeless colors for the base and front, the heat pump can be customized and given a new look again and again. Keep cool. Stay warm. Change cover.

An ELL Outdoor outdoor unit is included with all ELL heat pumps. It is a crucial component in our modern heating system, ensuring efficient use of energy from the outdoor environment, while ensuring significant energy savings compared to traditional heating systems.

ELL Outdoor has all-weather operation, which works in both extremely high and low temperatures – it is therefore very suitable for the Nordic climate and low frosts down to -25°, without affecting its operating capacity. The outdoor unit is designed in an elegant dark color, which blends nicely into the outdoor surroundings and gives it a stylish look. The robust construction ensures a long service life, resistance and reliability.

Please be aware that the heat pump must be installed by a KMO authorized installer, otherwise the warranty will be void.

12 liter expansion tank approved for operation on the geothermal circuit with alcohol.

Adjustable floor stand for mounting outdoor parts for heat pumps. The stand is galvanized and can be adjusted to different types of outdoor parts. Vibration damper and mounting block are NOT included.

• Height: 35-50 cm
• Width: 60-86 cm
• Depth: 45 cm

Plast-Line Ø600 mm lid for 600mm well.

ELL Cover – Replaceable cover that fits ELL Front.

ELL Cover is designed for easy replacement, so you can quickly adapt your product to your needs. Small magnets on the back of the cover ensure quick and trouble-free installation. The magnets ensure that the cover clicks into place easily and can be removed just as easily when you want to change it.

Vibration-damping riser for rubber feet. Fits rubber feet from Andersen Electric in size 1000 X 95 X 180 mm. Str. 1000 X 130 X 190 mm (LxHxW). Set of 2 pcs. Simple installation.

Vibration-damping rubber feet for heat pumps. Str. 1000 X 95 X 180 mm (LxHxW). Set of 2 pcs. With mounting rail and fastening bolts.

Brine set consisting of 3 bar safety valve, manometer and insulated brine circuit filling fitting - all approved for operation with alcohol.

180 liter stainless hot water tank developed for use with Bosch ground and air to water heat pumps. The hot water tank is white lacquered metal front and side plates with the rounded corners give the well-known Bosch heat pump design.

The Bosch VVB SWDP 200 O C has the same physical dimensions and design as the Bosch Compress 7001i LW ground source heat pump with metal front. The physical dimensions are as follows: width 600 mm x depth 610 mm x height 1,200 mm.

Delta Pack drain pump hidden in duct with elbow. Perfect in installations where piping goes to the ceiling. You need 6mm pvc hose from the unit.

Protect your heat pump with style and functionality
Our heat pump covers in white are designed to fit most air to air heat pumps for wall mounting. It offers both a smart and practical solution. With its spacious internal dimensions of 982x462x798 mm, it will fit a wide range of devices.

ELL Cover – Replaceable cover that fits ELL Front.

ELL Cover is designed for easy replacement, so you can quickly adapt your product to your needs. Small magnets on the back of the cover ensure quick and trouble-free installation. The magnets ensure that the cover clicks into place easily and can be removed just as easily when you want to change it.

Vibration-damping rubber feet for heat pumps. Str. 600 X 95 X 130 mm (LxHxW). Set of 2 pcs. With mounting rail and fastening bolts.

Wi-fi modul for Panasonic air/air heatpumpe for connetting with Verisure program.

ELL Front Boost – Same design, more power

ELL Front Boost is for those who want maximum performance combined with aesthetic design. With the same elegant design and color combinations as the ELL Front, but with greater capacity, the ELL Front Boost is an obvious choice for larger homes and cold winters.

ELL Front Boost ensures a fantastic indoor climate, regardless of whether there are low freezing temperatures or high temperatures. With intelligent control, easy installation and noise reduction technology, you get a user-friendly product that is also highly efficient when it comes to heating and cooling.

Please be aware that the heat pump must be installed by a KMO authorized installer, otherwise the warranty will be void.

Wavin is now launching a new cable well for various pipe systems as a supplement to the existing well programme.

Great strength: STAKKAbox has a very strong construction, which can handle a load of more than 40 tonnes. The well has also been tested for high side loads and has smooth walls, which makes placement and installation optimal.

Simple installation: The cable tray is quick and easy to install. It is very flexible, which means that it is easy to adapt inputs and outputs. The sections are 150 mm high and have double walls with stabilizing struts lengthwise and crosswise.

Many options: STAKKAbox has a wide range of applications and can be installed under everything from green to paved areas. With the combination of the low weight and the strong construction, Wavin's new cable well is optimal to work with.

Consists of Cover 12.5 ton composite, 3 pcs. intermediate rings.

Vibration-damping riser for rubber feet. Fits rubber feet from Andersen Electric in size 600 X 95 X 180 mm. Str. 600 X 130 X 190 mm (LxHxW). Set of 2 pcs. Simple installation.

ELL Cover – Replaceable cover that fits ELL Front.

ELL Cover is designed for easy replacement, so you can quickly adapt your product to your needs. Small magnets on the back of the cover ensure quick and trouble-free installation. The magnets ensure that the cover clicks into place easily and can be removed just as easily when you want to change it.

ELL Cover – Replaceable cover that fits ELL Front.

ELL Cover is designed for easy replacement, so you can quickly adapt your product to your needs. Small magnets on the back of the cover ensure quick and trouble-free installation. The magnets ensure that the cover clicks into place easily and can be removed just as easily when you want to change it.