Uponor - sita 2

Grooved polystyrene insulation panel for underfloor heating pipes at 300mm c/c. Panel dimensions 1200 x 790mm, available in two thicknesses 30 & 50. Used together with heat emission plate 1009132. Allow 0,95 m2/pcs (1,05 pcs/m2).

Temperature sensor Uponor 20-55°C

Uponor Fluvia T PUSH 12 WL-G pump unit.

Telestat Uponor Vario Plus är en normalt stängd (NC) 24 V telestat.

Uponor Vario Plus-telestaten identifieras av sin normalt stängda konfiguration och 24 V spänning för exakt produktmatchning.

Tydliga specifikationsdetaljer gör det enkelt att välja rätt Uponor Vario Plus-telestat.

Produced by PPSU. Q&E system only to be used with Uponor PE-Xa pipes

PPSU elbow Uponor 90° 40X40 mm

Uponor 1046902 rörmokeritillbehör Kranadapter

Uponor 1070561 rörmokeritillbehör Kompressionstee

Uponor 1070541 rörmokeritillbehör Armbåge

Pre-coupling PPSU Uponor 20 mm

Uponor thermostat T-23 230 V.

Prestee PPSU Uponor 40X32X40 mm

Uponor 1042331 rörmokeritillbehör Ändmatare, förminskning

Uponor fix clamp track strip with pins 17-20mm c/c100mm 0,6m

Adapter for use with the PPM manifold system.Max. pressure: 10 barMax temperature: 70°CAssembly of adapter and manifold is carried out without the use of tools using a bayonet coupling.

Modules for 1,3,4,6 loops, combineable to max. 12 loops, for connection with basic kit, connection right or left with flat sealing, or connection from below with optional elbowset, supply with lockshield valve for balancing ( with adjusting ring) and shutoff, adjusting ring for balancing without tools, prepared places for room name labels, return with valves and caps, prepared for actuators No.1000138 (24V male) No. 1005605 (230V male) loop connection Q&E 20, Q&E 17 complete with Q&E Rings 1025659,1042836 loop pitch 50 mm header pitch 225 mm max. pressure: 6 bar max. temperature: 60°C material: fibre glass reinforced polyamide

Press coupling for DHW and radiator systems. PPSU plastic with stainless steel/aluminum press cap, guaranteed leaking if not pressed. Calibration-free. Only to be used with Uponor MLC tubes and with Uponor approved pressing tools.

PPSU coupling Uponor 40X32 mm

Uponor adapter with male thread 1" and female thread 3/4" for Q&E PPM.

Prestee PPSU Uponor 50X40X50 mm

Prestee PPSU Uponor 16 x 20 x 16 mm (measurement of a pipe or fitting)

Benefits of Uponor pipe 3/4 3X15 mm with fixed socket.

Manifold made of DR brass. Supplied with compression fittings.

Produced by PPSU. Q&E manifold with 3/4 male thread, only to be used with Uponor PE-Xa pipes

Uponor 1089776 tillbehör till manuellt rörkapningsverktyg Ersättningsblad Silver