Uponor 1047999 rörmokeritillbehör

Uponor 1009004 rörmokeritillbehör Kompressionskrök

Modules for 1,3,4,6 loops, combineable to max. 12 loops, for connection with basic kit, connection right or left with flat sealing, or connection from below with optional elbowset, supply with lockshield valve for balancing ( with adjusting ring) and shutoff, adjusting ring for balancing without tools, prepared places for room name labels, return with valves and caps, prepared for actuators No.1000138 (24V male) No. 1005605 (230V male) loop connection Q&E 20, Q&E 17 complete with Q&E Rings 1025659,1042836 loop pitch 50 mm header pitch 225 mm max. pressure: 6 bar max. temperature: 60°C material: fibre glass reinforced polyamide

Uponor 1089776 tillbehör till manuellt rörkapningsverktyg Ersättningsblad Silver

Press coupling for DHW and radiator systems. PPSU plastic with stainless steel/aluminum press cap, guaranteed leaking if not pressed. Calibration-free. Only to be used with Uponor MLC tubes and with Uponor approved pressing tools.

Uponor PPSU elbow 90° with a diameter of 16mm.

Uponor 1038037 rörmokeritillbehör Armbåge

Uponor 1046916 rörmokeritillbehör Ändmatare, förminskning

Uponor SPI Smatrix Wave antenna Pulse A-265 sparepart antenna for Uponor Smatrix Wave controller Pulse X-265 6X not compatible to Uponor Smatrix Wave controller X-163/X-165 6XFunction: communication between controllers and thermostats or other system devices mounted on wall (vertically)Content: Uponor SPI Smatrix Wave antenna Pulse A-265 (incl. fixed connection cable) mounting material conformity: CE / EAC cabe length: 3m plug: RJ45 color: white

Uponor mold with gasket 1.

Uponor 1070533 rörmokeritillbehör Armbåge

Uponor 1070547 rörmokeritillbehör Kompressionskoppling

Uponor 1070536 rörmokeritillbehör Armbåge

Pressure coupling Uponor 40X32 mm.

Uponor 1029128 rörmokeritillbehör Kranadapter

End cap ppm Uponor 1

Uponor 1089674 Manuellt kapningsverktyg för rör Rörkapare

Uponor 1008661 rörmokeritillbehör Kranadapter

Press coupling for DHW and radiator systems. PPSU plastic with stainless steel/aluminum press cap, guaranteed leaking if not pressed. Calibration-free. Only to be used with Uponor MLC tubes and with Uponor approved pressing tools.

Aluminum 0.5 mm. Groove for Uponor pePEX Q&E pipe 20 x 2 mm. Length 1150 mm, width 280 mm. 2 bend guides with 190 mm, 390 mm and 570 mm spacing respectively. Material consumption approx. 2.5 pcs/m2.

Uponor 1070597 rörmokeritillbehör Kompressionstee

Uponor 1070595 rörmokeritillbehör Kompressionstee

Uponor 1070550 rörmokeritillbehör Kompressionskoppling

Uponor 1070542 rörmokeritillbehör Armbåge

Uponor 1008663 rörmokeritillbehör Kranadapter