Menu

Hjälp

Tryckrör och kopplingar - sita 7

Produkter i din sökning: 1431
Vsh Fabrieken Xpr carbon redu fø 22x28
XPress Carbon reducer FØ 22X28

68,00 kr (54,40 kr)

2904987

Leverantör, 2-3 vardagar leveranstid
Geberit T-piece stst d18-15-18
For sanitary facilities and industry, for heating systems, cooling and industry.

145,00 kr (116,00 kr)

2905268

Leverantör, 2-3 vardagar leveranstid
Geberit T-piece stst d42-42-42
For sanitary facilities and industry, for heating systems, cooling and industry.

283,00 kr (226,40 kr)

2905270

Leverantör, 2-3 vardagar leveranstid
Geberit T-piece stst d54-54-54
Geberit 31008 vattenslangstillbehör Slanganslutning Rostfritt stål 1 styck

322,00 kr (257,60 kr)

2905271

Leverantör, 2-3 vardagar leveranstid
Viega Sanpress T-piece 54 x 1/2" x 54 mm gunmetal
Viega 2217.2

721,00 kr (576,80 kr)

2904484

Leverantör, 2-3 vardagar leveranstid
Viega Sanpress T-piece 28 x 1/2" x 28 mm gunmetal
Viega 2217.2

333,00 kr (266,40 kr)

2904489

Leverantör, 2-3 vardagar leveranstid
Viega Prestabo T-piece 42 x 35 x 42 mm galvanized steel
Viega 1118

249,00 kr (199,20 kr)

2905524

Leverantör, 2-3 vardagar leveranstid
Viega Prestabo T-piece 22 x 18 x 22 mm galvanized steel
Prestabo T-piece with SC-Contur- galvanised non-alloyed steel- press connectorsComponentsEPDM sealing elementsd1: 22, d2: 18, d3: 22

110,00 kr (88,00 kr)

2905532

Leverantör, 2-3 vardagar leveranstid
Geberit Bend stst 45g d15
Geberit 30602 rördelar för avlopp, avfall och ventilation (DWV)

88,00 kr (70,40 kr)

2905304

Leverantör, 2-3 vardagar leveranstid
Geberit Bend w/ plend stst 45g d42
Geberit 32707 rördelar för avlopp, avfall och ventilation (DWV)

271,00 kr (216,80 kr)

2905307

Leverantör, 2-3 vardagar leveranstid
Geberit mapress transmission 15mmx3 / 4 st elforz
Fittings for galvanized steel pipes, for heating systems. Steel unalloyed 1.0034 E 195 AISI 1009

299,00 kr (239,20 kr)

2905431

Leverantör, 2-3 vardagar leveranstid
Viega Sanpress Inox XL bend 90° 76.1 Stainless steel/bright 482596
Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

1 764,00 kr (1 411,20 kr)

2904322

Leverantör, 2-3 vardagar leveranstid
Geberit mapress stainless steel t-piece with male thread: d=22mm r=3/4 d1=22mm
Geberit 31458 vattenslangstillbehör Slanganslutning Rostfritt stål 1 styck

184,00 kr (147,20 kr)

2959378

Beställningsvara, 9-10 vardagar leveranstid
Geberit T-piece stst 28x22x22mm.
Geberit 31234 vattenslangstillbehör Slanganslutning Rostfritt stål 1 styck

244,00 kr (195,20 kr)

2905260

Beställningsvara, 3-4 vardagar leveranstid
Viega Sanpress XL flange transition gunmetal DN80-88.9 mm
Viega 2259.5XL

4 129,00 kr (3 303,20 kr)

2904409

Leverantör, 2-3 vardagar leveranstid
Viega Sanpress XL bend 90° 88.9 gunmetal/glossy 350680
Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

2 650,00 kr (2 120,00 kr)

2904570

Beställningsvara, 19-20 vardagar leveranstid
Viega Sanpress inox sliding sleeve 15 mm stainless steel
Sanpress Inox Sliding coupling with SC-Contur- steel non-corroding- press connectors ComponentsEPDM sealing elementsd: 15

145,00 kr (116,00 kr)

2904235

Leverantör, 2-3 vardagar leveranstid
Viega Sanpress inox sleeve 54 mm stainless steel
Sanpress Inox Coupling with SC-Contur- steel non-corroding - press connectorsComponents EPDM sealing elements d: 54(VdS certification)

216,00 kr (172,80 kr)

2904238

Leverantör, 2-3 vardagar leveranstid
Viega Sanpress Inox Tee 22mm x 3/4" x 22mm stainless steel
Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygon, VdS certificationd1: 22, Rp: 34, d2: 22

212,00 kr (169,60 kr)

2904269

Leverantör, 2-3 vardagar leveranstid
Viega Sanpress Inox transition 35 mm x 1" stainless steel
Viega 2311

267,00 kr (213,60 kr)

2904216

Leverantör, 2-3 vardagar leveranstid
Viega Sanpress inox sleeve 35 mm stainless steel
Viega 2315

145,00 kr (116,00 kr)

2904240

Leverantör, 2-3 vardagar leveranstid
Viega Profipress G bend 90° 22 Copper/bright 345556
Viega 2616.1

110,00 kr (88,00 kr)

2902727

Leverantör, 2-3 vardagar leveranstid
Viega pipe marker pen
Viega pipe marker pen model 2490.1.

55,00 kr (44,00 kr)

3274515

Leverantör, 2-3 vardagar leveranstid
Viega Easytop ball valve 15 mm x 1/2'' Socket/socket Silicon bronze
Easytop ball valve with SC-Contur. Pressure connection. With silicon bronze valve body according to DIN 50930-6 / DIN EN 1982, maintenance-free spindle, T-shaped handle with replaceable medium marking green/red, stainless steel ball, EPDM gaskets (press connection).

1 262,00 kr (1 009,60 kr)

3274653

Leverantör, 2-3 vardagar leveranstid
Viega profipress g elbow 45° 35 345648
Press connector system with press connectors and pipes made of copper in acc. with EN 1057 and DVGW worksheet GW 392 suitable for:•Gases in acc. with DVGW G 260 in gas installations in acc. with DVGW-TRGI 2008 (DVGW worksheet G 600) / DVFG-TRF 2012•Liquid gas in the gas phase for domestic and commercial applications, tested in acc. with DVGW worksheet G 5614•Heating oil pipelines for heating oil in acc. with DIN 51603-1•Diesel fuel pipelines for diesel fuel, as suction and pressure pipelines in acc. with EN 590 in consideration of the general technical approval Z-38.4-71Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet G 5614, point 4.4.1, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingYellow dot, yellow rectangle and inscription »Gas MOP 5 / GT1«Sealing elementsHNBR, yellowDimensions/MaterialStandard sizes: d 12, 15, 18, 22, 28, 35, 42, 54 made of copperXL sizes: d 64.0 made of copperPress connectors with threaded connection d 12–54 made of gunmetalXL press connectors with threaded connection d 64.0 made of copperAreas of applicationNatural gas/Liquid gasHeating oil/Diesel fuel (d 12–54)NoteOnly Viega copper and gunmetal press connectors, which are marked with a yellow rectangle and have the inscription »Gas MOP 5 / GT1« are permitted for use in installations for gas, heating oil and diesel fuel systems!Use of the system for application areas and media other than those described here must be agreed with Viega Service Center through a material request.Operating conditionsGas and liquid gas systems•Operating temperature -20 °C up to +70 °C•Operating pressure max. 0.5 MPa•Operatin

336,00 kr (268,80 kr)

3274518

Leverantör, 2-3 vardagar leveranstid
- «
- 1
- ...
- 5
- 6
- 7
- 8
- 9
- ...
- 58
- »