Tryckrör och kopplingar - sita 58

Profipress G T-stykke med SC-Contur- kobber- prestilslutningMedHNBR pakningerd1: 28, d2: 22, d3: 28

Viega 2616.1

Viega 2415.3

Viega 2316

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, R-threadComponentsEPDM sealing element, polygon, VdS certificationd: 22, R: 34

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2317.2

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygon, VdS certificationd1: 22, Rp: 34, d2: 22

Sanpress Inox XL Reducer with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing element, cutting ring, separator ring, VdS certification d1: 88,9 d2: 76,1

Viega 2317.2

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-thread Components EPDM sealing element, polygond: 18, R: 34

Sanpress Inox Connection screw fitting with SC-Contur- steel non-corroding- press connection, G-thread- flat sealingComponentsEPDM sealing element, EPDM flat seal, union nut screw fitting d: 18, G: 34

Viega 2311

Viega 2312

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-thread ComponentsEPDM sealing element, polygon, VdS certificationd: 54, R: 2

Viega 2612

Viega 2312

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Profipress T-piece with SC-Contur- copper- press connectorsComponentsEPDM sealing elements d1: 22, d2: 15, d3: 22

Viega 2416

Viega 2415.1

Viega 2426

XPress Stainless reduced T-piece FFF 28X15X28

Geberit 21213 vattenslangstillbehör Slanganslutning Kol, Stål 1 styck

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-thread Components EPDM sealing element, polygon, VdS certificationd: 22, R: 1